• Journal of Korean Society of Forest Science
• /
• v.88 no.2
• /
• pp.195-204
• /
• 1999

To improve nut production and timber quality in a plantation, crown shape controls were suggested for Korean white pines (Pinus koraiensis) under age class III through the analyses of the crown shape controls for seed orchard trees in several species, of crown status of controlled and uncontrolled trees in a Korean white pine seed orchard, and of growth characteristics of plantation trees under age class III. For nut production from the small trees less than 8 m, modified leader type can be applied by cutting the central leader and all branches below 1 m and keeping 4~5 nodes with 3~4 whorled branches a node locating 1 m apart. Trees with a 4~8 m long trunk below the first living branch are shaped into trees for nut and timber production, which have a 4~8 m long knotless stem and a modified leader type crown with 4~5 nodes with 3~4 whorled branches a node at a distance of 1 m. Trees, showing the first living branch at or above 9 m from the surface, are pruned severely for timber production and result in a central leader type containing two fifths of the initial crown. It is advisable to remove the leader and the branches when collecting cones or after/during October to take advantage of easy labor and little resin while cutting. After stem cut, branches showing apical dominance are to be cut to control height when necessary. The removal of the uppermost node may be needed to control the crown shape several years after the initial stem-cut.

• Journal of Korean Society of Forest Science
• /
• v.94 no.5 s.162
• /
• pp.291-301
• /
• 2005

Robinia pseudoacacia is one of most widely cultivated exotic species in Bulgaria. The total area of black locust plantations amounts to 2.9% of the total forest area of the country. 15.34% of the plantations are of management afforestations category, where the priority is given to timber production. They have been created on rich and moisture soils, which are the most appropriate for the species in order to achieve its biological potentials of high productivity. The rest of the available plantations in the country are planted on poorer and drier soils up to 600~800 m altitude. The high adaptive ability of the species to unsuitable environmental conditions as well as the high sprout potential was used for their creation. These stands are mainly done with the aim to protect and ameliorate damaged environments and production of small-size timber and fire woods. They are cultivated until 15-20 years and are revived by sprouts. Therefore the management goals searched, 45.69% of those forests are low productive and 38.97% with average productiveness. The present report deals with growth and productivity capacity of black locust plantations; production of sowing materials; production of reproductive and vegetative saplings for afforestation; the technological aspects of afforestation works; the management and use of black locust plantations as well as some more important diseases and pests affecting the species. The report is entirely based on Bulgarian scientific research works and experience with the Robinia preudoacacia. Recommendations for optimizing the use of species are given.

• Journal of the Korean Wood Science and Technology
• /
• v.44 no.4
• /
• pp.607-615
• /
• 2016

The delamination along the annual ring on the cross-section of laminae and the bonding strength according to the tangential angle between laminae were evaluated for the production of 3-ply cross-laminated timber (CLT) using domestic larch. Since there is no standard for CLT in Korea, the production and test of specimens for bonding strength followed the standard procedure of "Structural glued laminated timber" (KS F 3021). The standard specifies to exclude any measurement from the cracks of timbers resulted from drying or knots during delamination test of the glued laminated timbers. However, the failure of cross-sectional tissues along the annual rings was observed near the glue-line of all specimens during the delamination test. Because this phenomenon can generate defects in the CLT that may be exposed to various temperatures and relative humidities after the actual construction, the delamination percentage was measured by including this wood failure. As a result, the delamination percentage of the CLT which had been combined in such a way that the annual rings of outer lamina were directed inward was the lowest, which was around 13%, regardless of the annual ring direction of the middle lamina. On the other hand, the delamination percentage of the CLT which had been combined in such a way that the annual rings of outer lamina were directed outward was the highest, which was around 26%. Furthermore, end-split occurred in the outer lamina during the drying process of the boiling delamination test, which affected the delamination percentage. Therefore, the soaking delamination test was found to be more appropriate for evaluating the delamination strength of CLT. The block shear strength of larch CLT was $3.9{\pm}0.9$ MPa on average, which was 46% lower than the block shear strength requirement (7.1 MPa) of the standard, but satisfied the criteria of the block shear strength (3.5 MPa) of the European Standard (prEN 16351: 2013).

• Journal of the Korea Institute of Building Construction
• /
• v.23 no.6
• /
• pp.761-772
• /
• 2023

The fire resistance design of timber structures involves calculating the residual section based on charring depth, which is then utilized in structural design. Charring depth is determined from fire-resistance test results in Korea, which currently do not account for the charring properties of the adhesive used in Glued Laminated Timber(GLT) production. This study fabricated GLT using various adhesives employed in domestic GLT production, comparing the charring properties by adhesive type and the fire resistance performance relative to the directionality of the laminated surface. Melamine demonstrated the most advantageous fire resistance performance, followed by resorcinol and polyurethane. Furthermore, it was established that the laminated section exhibited a higher charring rate, influenced by the adhesive, compared to the laminated surface, which significantly impacts the fire resistance performance.

• Journal of Korean Society of Forest Science
• /
• v.82 no.3
• /
• pp.292-304
• /
• 1993

This research developed a forest-level harvest scheduling model using linear programming (LP). The formulations of the LP model include timber production schemes with constraints of nondecling yield forest conversion strategies, the minimum timber supply, levels and the maximum cut acrages. The model is able to generate both Model I and Model II types of input matrix in MPS format. In this paper, use of LP in building the framework of the strategic forest planning model was justified by comparing the algorithmic characteristics of LP with those of Gentan probability and binary search approaches through literature reviews. In order to demonstrate the field applicability of the model proposed. (1) the harvest scheduling problem for about 11,000-hectare case study area (Mt. Baekun area in Southern Experimental Forest of Seoul National University) was formulated and soloed and (2) the effects of the change in task regulatory timber production constraints or. optimal harvesting schedules here investigated.

• Resources Recycling
• /
• v.17 no.5
• /
• pp.66-75
• /
• 2008

Using a pinus koraiensis and pinus rigida which are normally being discarded in South Korea, the optimal condition of producing charcoals has been studied to develop activated carbons which can be recycled as a higher value-added product. A study on manufacture of activated carbons from a discarded timber consists of two processes, the production process of charcoals from a discarded timber by low temperature pyrolysis process and the production process of activated carbons from the charcoals by chemical activation reaction. This study deals with the production process of charcoals from a discarded timber by low temperature pyrolysis process. As a results of experiment, it was investigated that charcoals produced through drying at $150^{\circ}C$ for 6hr and pyrolysis process at $500^{\circ}C$ for 1hr had the highest values in physical properties such as iodine number and BET surface area. Furthermore, through observing SEM images, the maximum development of porosity had been founded in this condition. It was confirmed that values of physical properties on using a pinus koraiensis are superior to the ones when using a pinus rigida. When charcoals were produced from a pinus koraiensis in this condition, BET surface area was approx. $640m^2/g$.

• Current Research on Agriculture and Life Sciences
• /
• v.2
• /
• pp.42-55
• /
• 1984

The direction of scientific researches on tree improvement and forest management in several universities and research institutes in Japan can be summarized as follows: They put a great emphasis on sugi, Cryptomeria japonica and cypress, Chamaecyparus oblusa which are two major conifer species largerly planted in the Japanese forestry. In the research of sugi, a great concern has been made in evaluating inheritance of forest tree, quantitative characters and genetic parameter of growth, and in breeding for resistance to diseases and insects and to all the natural calamities. Interaction between environmental conditions and genetic nature of tree can be concerned factors in relation with forest damage, together with silvicultural conditions and pest infestation. Selfing hybrids of $F_1$ made from crossing twisted-leaf sugi, defomity leaf type and midori sugi, normal leaf type segregated the normal needle, twisted needle, green leaf and albino leaf type. It seemed that separation of many defomity individuals can be governed by two dominant complementary genes and from the near loci of which it was detected lethal genes. 52% of Japanese forestry is occupied by the small forest landowners like Korean forestry. This made difficulty for forest improvement such as progressive afforestation and for capital accumulation form forestry. The Forest Corporation was established at first in 1959 to aming at productive forestry structure and forest management, and afforestation. For these purpose, 35 Forest Corporations are at moment operating throughout Japan. However, investment in forestry business becomes less attractive since the wage in forest production duction increased in higher trend. than timber price. Therefore, an artifical afforestation becomes yearly decreased. At present. the self-sufficient rate of timber production in Japan is about 35%, and so a great effort is being made to increase self-sufficient rate of timber production.

• Journal of Korean Society of Forest Science
• /
• v.90 no.4
• /
• pp.505-512
• /
• 2001

This study examined the impacts of tariff reductions on timber products in the new round of WTO negotiations on domestic timber products markets and presented the measures to minimize their impacts. Scenarios on reductions in tariffs were developed based on result of UR negotiation and prospective issues on scope of tariffs bound, base rates for negotiation, degree of tariff cuts, etc. emerged during preparatory meetings held to launch the New Round of WTO Negotiation. Korea Timber Market Model(KORTIMM) developed by Korea Forest Research Institute was used to simulate the impacts on forest products markets by scenario. It was estimated that their impacts on net imports would be much larger than those on both consumption and production. The results showed that their impacts on plywood market and on net imports of processed forest products would be much larger relatively but that their impacts on log market and on consumption and production of processed forest products would be less than 1 percent. It was estimated that log consumption would be reduced due to reduction in domestic production of processed products and thus both production and imports of logs would be reduced as well. In oder to minimize the impacts, efforts should be made to start negotiations to reduce tariffs with bound rates for bounded products and with applied rates for non-bounded products, to expand the implementation period and to maintain the status of developing country. In addition, it might be one of countermeasures to use legitimate measures consistent with WTO rules such as anti-dumping, countervailing measures and safeguards.

• Journal of Korean Society of Forest Science
• /
• v.50 no.1
• /
• pp.29-35
• /
• 1980

The purpose of this study is to analyze and to forecast the long-term domestic demand and export demand for timber in Korea by regression models with time series data during 1962~1978. The method applied in this study was econometric analysis using Time Series Processor. The most important explanatory variables of timber demand were found to be the production activities of wood products industries to the prices of substitute goods. On the basis of the long-term forecast made according to the guidelines of the Fifth Five-Year Plan. According to the projection, domestic timber demand is projected at 8 million cubic meters in 1987 and 10.6 million cubic meters in 1991. On the other hand, the total demand (domestic demand plus export demand) for timber is projected 21.4 million cubic meters in 1987 and 27.2 million cubic meters in 1991.

• Journal of Korean Society of Forest Science
• /
• v.96 no.5
• /
• pp.572-579
• /
• 2007

Tree species diversity is an important aspect of forest ecosystem stability. Tree species inventories at defined sites and in minimum diameter classes give a reliable indicator of the diversity level as well as the structural stability level of a study site. This study was conducted to investigate the species composition and the stand structure of the natural forest, timber-harvested forest (logged-over forest) and degraded forest of the Oak-twin Township in the Bago Yoma Region of Myanmar. Natural forest showed the highest family and species richness in all the investigated forests. At the family level, Verbenaceae occupied the highest importance value index (IVI) in all the forest stands while teak (Tectona grandis Linn. f.) occupied the highest IVI at the species level. However, the small diameter classes of T. grandis and other commercial species were less than those of big diameter classes in all the investigated forests. This abnormal pattern of diameter distribution could be a problem for the sustainable production of commercial timber species in the near future.