• Steel and Composite Structures
• /
• 제45권1호
• /
• pp.83-100
• /
• 2022

Timber is one of the few natural, renewable building materials and glulam is a type of engineering wood product. In the present work, timber-based braces are applied for retrofitting midrise Special Moment Resisting Frame (SMRF) using two types of timber base braces (Timber base glulam, and hybrid Timber-Steel-BRB) as alternatives for retrofitting by traditional steel bracings. The improving effects of adding the bracings to the SMRF on seismic characteristics of the frame are evaluated using load-bearing capacity, energy dissipation, and story drifts of the frame. For evaluating the retrofitting effects on the seismic performance of SMRF, a five-story SMRF is considered unretofitted and retrofitted with steel-hollow structural section (HSS) brace, Glued Laminated Timber (Glulam) brace, and hybrid Timber-Steel BRB. Using OpenSees structural analyzer, the performance are investigated under pushover, cyclic, and incremental loading. Results showed that steel-HSS, timber base Glulam, and hybrid timber-steel BRB braces have more significant roles in energy dissipation, increasing stiffness, changing capacity curves, reducing inter-story drifts, and reducing the weight of the frames, compared by steel bracing. Results showed that Hybrid BRB counteract the negative post-yield stiffness, so their use is more beneficial on buildings where P-Delta effects are more critical. It is found that the repair costs of the buildings with hybrid BRB will be less due to lower residual drifts. As a result, timber steel-BRB has the best energy dissipation and seismic performance due to symmetrical and stable hysteresis curves of buckling restrained braces that can experience the same capacities in tension and compression.

• 한국산학기술학회논문지
• /
• 제17권5호
• /
• pp.574-581
• /
• 2016

대 일본 단기소득임산물 수출액은 2010년 1,754만 달러에서 2014년 942만 달러로 2010년 대비 46.3% 감소하였다. 추가적인 노력을 통해 대 일본 수출 촉진이 필요한 시점이다. 본 연구는 일본의 FTA, TPP 등 시장 개방 여건 변화에 대응하여 밤, 표고버섯, 떫은감, 산양삼의 일본 시장에서의 경쟁력 확보 방안을 모색하기 위해 마련되었다. 본 연구에서는 일본 주부의 단기 임산물의 속성별 선호도를 분석하기 위하여 컨조인트 분석을 활용하였다. 분석 결과, 임산물별 속성 및 수준에 대한 뚜렷한 선호에 차이가 나타났으며, 한국산 단기소득임산물은 중국산 단기소득임산물 보다 선호되었으나 일본산 단기 소득임산물 보다는 경쟁력이 다소 떨어지는 것으로 나타났다. 또한 일본 주부는 가격에 민감하게 반응하지 않았으며, 다른 속성 변화에 더 민감하게 반응하는 것으로 나타났다. 본 연구에서 도출된 결과는 우리나라 주요 단기임산물의 대 일본 수출 방안 수립에 활용될 수 있을 것이다.

• 한국식생활문화학회지
• /
• 제36권5호
• /
• pp.421-429
• /
• 2021

Local non-timber forest products can be easily accessed by tourists. These also provide opportunities for tourists to experience the local culture. Many local governments are paying constant attention to the development of non-timber forest product brands to revitalize the local economy and increase the profits of local farmers. Although there are many forest products and tourism resources in each region of Korea, there is no local specialized strategy to sell non-timber forest products and promote consumers' purchase intentions. In this study, we aimed to explore the consumers' perceived creating shared value (CSV) and its association with purchasing behavior of non-timber forest products in Jeongeup city, Korea. Data were collected from 1,066 consumers who had purchased non-timber forest products. Purchasing patterns of local specialty products differed depending on consumers' perceived CSV levels. In addition, consumers with higher levels of perceived CSV showed higher awareness and familiarity with Jeongeup city and experienced Jeongeup city's non-timber forest products. Our findings suggest that improving consumer perception towards CSV of non-timber forest products can be used as a marketing strategy for local non-timber forest products to revitalize the local economy.

• 한국산림과학회지
• /
• 제104권4호
• /
• pp.607-614
• /
• 2015

목재 생산 및 공급의 활성화를 위한 목재생산작업에서의 현황 및 문제점과 임업기계화사업의 현황 및 효과 등에 대한 설문조사를 실시하였다. 국산목재 생산 및 공급 활성화를 위해서는 임업기계화 사업의 추진, 정책 및 제도 개선, 임도망 확충, 작업원 양성, 목재생산 및 공급체계 개선, 임업기계 보급, 삼림작업시스템 구축, 교육 훈련 등이 필요하였다. 또한, 목재생산 및 공급의 활성화를 위한 정책은 정책목표의 재구축, 정책의 일관성, 법률 및 제도 정비 등이 더욱 필요하였다. 임업기계화 사업의 성과 및 효과를 높이기 위해서는 임업기계화 정책이 더욱 추진되고, 임업기계 장비의 보급과 더불어 교육 및 훈련과 강사능력 배양, 교재개발, 현장 기술지도 등이 시급한 정책이었다. 목재수요자의 선호도를 높이기 위해서는 전목집재를 통해 장재를 생산 공급하고, 국산재 이용도를 높이기 위해서는 낮은 가격과 생산목재의 길이와 직경 등에서 우량재의 생산 공급이 필요하였다.

• 한국산림과학회지
• /
• 제104권2호
• /
• pp.248-253
• /
• 2015

본 연구는 단기소득임산물에 대한 최적 생산계획을 수립하기 위한 의사결정 정보를 제공하는 수단으로 포트폴리오 기법을 적용하였다. 대상품목은 밤, 대추, 호두, 떫은감이며, 2008년부터 2013년까지 임산물생산비 통계의 생산량, 생산비, 조수입 자료를 이용하였으며 단위당 순수익을 분석하였다. 포트폴리오 모델에서 목적함수는 투자위험을 나타내는 유실수 품목의 수익 변동폭을 최소화하는 것이고, 제약조건은 최소 기대수익률을 달성하는 것이다. 분석결과, 2013년 유실수의 생산비율 밤 7%, 대추 20%, 호두 5%, 떫은감 68%과 비교하여 포트폴리오에서는 미래의 유실수 생산비율을 평균 밤 10%, 대추 9%, 호두 3%, 떫은감 78%로 구성하는 것이 안정적인 소득증대를 위해서 보다 효율적인 것으로 제시되었다. 이러한 원인은 호두와 대추가 순수익이 가장 많았지만 생산량과 수익의 등락폭이 상대적으로 컸고, 떫은감과 밤은 상대적으로 안정된 생산량과 일정한 수익을 유지하고 있기 때문인 것으로 분석되었다.

• Journal of Forest and Environmental Science
• /
• 제30권2호
• /
• pp.189-200
• /
• 2014

The tropical wet evergreen, tropical semi evergreen and moist deciduous forest types are projected to be impacted by climate change. In the Western Ghats region, a biodiversity hotspot, evergreen forests including semi evergreen account for 30% of the forest area and according to climate change impact model projections, nearly a third of these forest types are likely to undergo vegetation type change. Similarly, tropical moist deciduous forests which account for about 28% of the forest area are likely to experience change in about 20% of the area. Thus climate change could adversely impact forest biodiversity and product flow to the forest dependent households and communities in Uttara Kannada district of the Western Ghats. This study analyses the distribution of non-timber forest product yielding tree species through a network of twelve 1-ha permanent plots established in the district. Further, the extent of dependence of communities on forests is ascertained through questionnaire surveys. On an average 21% and 28% of the tree species in evergreen and deciduous forest types, respectively are, non-timber forest product yielding tree species, indicating potential high levels of supply of products to communities. Community dependence on non-timber forest products is significant, and it contributes to Rs. 1199 and Rs. 3561/household in the evergreen and deciduous zones, respectively. Given that the bulk of the forest grids in Uttara Kannada district are projected to undergo change, bulk of the species which provide multiple forest products are projected to experience die back and even mortality. Incorporation of climate change projections and impacts in forest planning and management is necessary to enable forest ecosystems to enhance resilience.

• Journal of the Korean Wood Science and Technology
• /
• 제52권4호
• /
• pp.375-382
• /
• 2024

The study focuses on evaluating the bending creep performance of laminated veneer lumber (LVL) formwork in timber concrete composite (TCC) structures. Timber-framed construction is highlighted for its environmental benefits and seismic resistance, but limitations such as poor tensile strength and brittle failure in bending hinder its use in high-rise buildings. Wood-concrete hybrid structures, particularly those using reinforced concrete slabs with TCC floors, emerge as a potential solution. The research aims to understand the time-dependent behavior of TCC components, considering factors like wood and concrete shrinkage and connection creep. The experiment was conducted in western Japan on the TCC floor designed for use in the Kama-city Inatsuki-higashi compulsory education school. The LVL formwork, measuring 9,000 mm by 900 mm, and concrete is loaded onto it for testing. The creep test periods are examined using concrete loading. It employs a comprehensive creep analysis, adhering to Japanese standards, involving deflection measurements and regression analysis to estimate the creep coefficient. Results indicate substantial deformation after shoring removal, suggesting potential reinforcement needs. The study recommends extending test periods for improved accuracy and recognizing regional climate impacts. Overall, the research provides valuable insights into the potential of LVL formwork in TCC structures, emphasizing safety considerations and paving the way for further experimentation under varied conditions to validate structural integrity.

• 한국염색가공학회지
• /
• 제34권4호
• /
• pp.234-240
• /
• 2022

Use of processed timber can help reduce environmental damage and the economic burden of resources (important problems with use of raw timber) and can meet the needs of various fields where the sensibility of raw timber is required. Veneer wood is positioned as a high-value-added product due to its luxury and beauty, and it is used in various fields as a building-related material, such as interior decoration, furniture, flooring, building interior materials, and lumber. Dyeing is necessary to enhance the aesthetic appearance of this pattern and to expand its use. Therefore, in this study, we compared and analyzed the dye ability of oak-patterned materials with reactive dyes, and evaluated their performance as interior materials. As a result, the oak pattern was dyed with 9 kinds of reactive dyes and a comparative analysis was performed. The most suitable conditions are 50℃, 2 hours, and 0.5% o.w.f. In addition, evaluating resilience to daylight, resilience to rubbing, fire resistance, and flame retardance, yielded results suitable for use as an interior material. In this study, the dyeability of veneer dyed under various conditions using reactive dyes was compared and analyzed the performance as an interior material was evaluated.

• Journal of the Korean Wood Science and Technology
• /
• 제50권6호
• /
• pp.458-474
• /
• 2022

Many methods have been explored to increase the palatability of pine (Pinus merkusii), the most common wood used for termite baiting. However, because of the undersupply of pine in Indonesia, it is crucial to vary the wood species for termite baiting and look for potential alternatives. Furthermore, various studies have shown that baiting time influences the intensity and pattern of termite attacks. Therefore, the present research aimed to study the preferences of subterranean termites and find the ideal baiting time among community wood species from Bogor, West Java, as a baiting alternative to pine. The woods tested were Acacia mangium (acacia), Falcataria moluccana (sengon), Anthocephalus cadamba (jabon), Maesopsis eminii (manii), Swietenia mahagoni (mahogany), Hevea brasiliensis (rubberwood), and P. merkusii (pine). Field tests were carried out based on the American Society for Testing and Materials D 1758-06 at the Arboretum, Faculty of Forestry and Environment, IPB University, with a baiting time of one to six months. The results led to the identification of four species of termites, namely Microtermes sp., Macrotermes sp., Shedorhinotermes sp., and Capritermes sp.. The frequency of termite attacks on the test site reached 93.1%. Rubberwood was the most potential wood bait for subterranean termites, indicated by the highest average weight loss value (65.8%) with a shorter optimal baiting time (up to one month) than that of other tested woods.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문초록집
• /
• pp.354.1-354
• /
• 2002

Pitch is a perception related to frequency, one of the psychological aspects or attributes of tones, and an important factor to determine sound quality of sound together with loudness and timber. while a study on pitch has been actively achieved In the part of speech recognition and speech separation, that for analysis and improvement of product sound quality is not yet enough. (omitted)