• Proceedings of the Optical Society of Korea Conference
• /
• 2000.08a
• /
• pp.154-155
• /
• 2000

Optical switches using MEMS(Micro Electro Mechanical Systems) process have been widely developed since conventional optical switches cannot meet the requirements of new systems. $N_2$ type micro-mirror switches are easy to control, have simple optical systems but have difficulties in expanding the ports. Micromirrors of 2N type switches must be tilted at various angles and have relatively complicated optical systems but have advantage in expanding ports. Another type of optical switch using MEMS process is micro-waveguide type. It is reliable than other types since it has no moving parts.

• Journal of the Korean Society of Costume
• /
• v.62 no.1
• /
• pp.76-89
• /
• 2012

This study was performed to offer the basic data for the design of farm shoes. 265 Korean female farmers aging between the 40s to the 80s volunteered for this study and we measured 40 items on each foot with the 3D foot scanner. First, the differences between farmers' feet and non-farmers' feet were analyzed. Farmers' feet were thicker in the instep areas, but had lower arch height than non-farmers' feet. In addition, farmer's feet were tilted to the inside. Next, eight factors were extracted among the 40 measuring items, and the classification criteria of the foot shape was analyzed. The important factors were: size of foot length and volume of ankle, malleolus height and size, volume of the front part of ankle, medial & lateral ball width, and vertical size of foot. Third, three clusters according to the foot shapes were categorized by cluster analysis of eight factor scores. Foot type 1 was medium in foot length, big in thickness, large in lateral ball width, small in toe 1 angle, and tilted to the inside. Foot type 2 was long and slim, and big in toe 5 angle. Foot type 3 was short in foot length, medium in volume of the front part of ankle, large in medial ball width, and big in toe 1 angle. Despite its shortness, foot type 3 was thick and showed severe deformation in toe 1. Lastly, the frequency distributions of the foot types in each age group were analyzed. Female farmers of the forties showed high frequency in type 1 and other age groups showed high frequency in type 2. The older female farmers showed higher frequency of type 3.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.5
• /
• pp.416-423
• /
• 2016

In this paper, a conformal type $1{\times}4$ microstrip patch array antenna with tilted antenna beam is presented for UWB sensor applications. Each antenna element comprises E-shaped patch with L-probe feeding to increase the bandwidth. The tilted antenna beam of 20 degree can be achieved with 42 ps microstrip delay lines at the series feeding network with T-junctions. The measured reflection coefficient is >9 dB at 3.5~4.5 GHz. The measured antenna gain and HPBW are >10 dBi and <30 degree at 3.75~4.25 GHz.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.32 no.3
• /
• pp.349-361
• /
• 2008

The purpose of this study was to develop bodice basic patterns fitted on different body types of adult women. To meet this purpose, first, human bodies were measured using tight fitting technique and classified based on the shapes of upper trunk. The subjects were 214 women $20{\sim}39$ years of age. For the measurement of female upper trunk, tight fitting technique was utilized. The development of figures of upper trunks were obtained from women. These development of figures were then digitized and analysed using the PAD system. A total of 155 measurements were taken from each of the development of figures. then, 32 measurements were selected for the further analysis. As complimentary data, 22 direct body measurements using an anthropometric method and 23 body measurements using a photographic method from the side view pictures of the participants were also obtained. The results and discussions of this study are as follows: Using the body measurements from the development of figures, a factor analysis and a cluster analysis were conducted. As a result, the body types were classified into 5 different types, which differ in terms of bust volumes, shoulder slopes, shoulder tilts, back silhouettes, body axises. The prominent characteristics of each type are as follows: The first type has a large bust volume. The second type has a right figure. The third type has a rounded back silhouette. The fourth type has a back silhouette of scapular coming backward. Finally the fifth type has a shoulder tilted forward.

• Journal of Biosystems Engineering
• /
• v.27 no.6
• /
• pp.547-556
• /
• 2002

Upright positioning of garlic cloves in mechanical planting has been considered as an essential process because pose of garlic affects not only initial budding and rooting of garlics but quality and yield. Due to the geometrical uniqueness and irregularity of garlic cloves in shape, manual planting operation has been conducted. The overall objective of this research was to determine design factors for designing a garlic clove planter The results are summarized as follows : 1. A vibrating-type clove-metering device was designed and tested. Effects of tilted angle of metering plate and magnitude of vibration on metering performance were investigated. The successful planting rates of the metering device were 96.7% for Hanji varieties. 2. Clove upright-positioning device, posture inducer was designed and tested. When the clearance between the hoppers was set at 4mm, the rates of upright positioning of the device were 92.2% for with Hanji varieties. 3. Optimum metering performance was observed at the plate tilted angle of 80。 with the posture type positioning device.

• Journal of the Microelectronics and Packaging Society
• /
• v.30 no.4
• /
• pp.50-60
• /
• 2023

Ball Grid Array (BGA) is a widely used package type due to its high pin density and good heat dissipation. In BGA, solder balls play an important role in electrically connecting the package to the PCB. Therefore, understanding the inelastic deformation of solder balls under various mechanical loads is essential for the robust design of semiconductor packages. In this study, the geometrical effect on the inelastic deformation and fracture of solder balls were analyzed by finite element analysis. The results showed that fracture occurred in both tilted and hourglass shapes under shear loading, and no fracture occurred in all cases under compressive loading. However, when bending was applied, only the tilted shape failed. When shear and bending loads were combined with compression, the stress triaxiality was maintained at a value less than zero and failure was suppressed. Furthermore, a comparison using the Lagrangian-Green strain tensor of the critical element showed that even under the same loading conditions, there was a significant difference in deformation depending on the shape of the solder ball.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.05a
• /
• pp.370-373
• /
• 2003

Superluminescent diodes(SLDs) are the optimum light sources for application in optical measurement systems such as fiber gyroscopes, optical time domain reflectometers, and to short and medium distance optical communication systems. The broadband characteristics of SLDs reduce Rayleigh backscattering noise, polarization noise, and the bias offset due to the nonlinear Kerr effect in fiber gyro systems. In this paper, in order to suppress lasing oscillation, we introduced a laterally tilted SCH(Separate Confinement Heterostructure)-SLD with a window region. An output power of 11mW has been achieved at 200mA injection current at 25$^{\circ}C$. At 120mA, parallel and perpendicular to the junction were 31$^{\circ}$${\times}$38$^{\circ}$.

• The korean journal of orthodontics
• /
• v.17 no.1
• /
• pp.63-72
• /
• 1987

This is to investigate the difference between craniofacial correlation of Angle's class III malocclusion and that of normal occlusion. For this investigation, 28 adult males and famales, who have class III malocclusion, and 35 adult males and 46 adult famals., who have normal occlusion were selected to measure actual dimension of cranial base and to investigate ratio of various parts of maxillofacial skeleton against cranial base. Class III malocclusion were, also , classified based on SNA and SNB angle in normal range. Results were as follows. 1. In class III malocclusion, actual dimension of cranial base were appeared to be less than normal occlusion in both sex. 2. In class III malocclusion, values were less than normal occlusion in BN/ptm-A in both sex, but had no significance between two. 3. In class III malocclusion, ramal inclination, mandible inclination, BN/Go-Pog, lower genial angle were appeared to be greater. Thus, characteristic mandibular protrusive appearance of class III malocclusion was due to relative ratio and morphologic characteristic of mandibular body dimension against cranial base. 4. In class III malocclusion, upper incisors were labially tilted and lower incisors were lingually tilted compared to normal occlusion. 5. In typing of class III malocclusion, the most common type was found to be one which maxillas were in normal range, while mandibles were in protrusive tendency.

• International Journal of CAD/CAM
• /
• v.12 no.1
• /
• pp.1-8
• /
• 2012

This study analyzes the characteristics of two different kinds of squat exercise through physical experiments and a computer simulation, i.e. one with a free weight and the other with a Smith machine are studied. This study also proposes a new design for the Smith machine, which has both the advantages of each type based on the results of the analysis. The muscle force and level of stimulation of the lower extremities during squatting were calculated by running an inverse dynamics analysis program on a musculoskeletal model together with the measured motion data. The calculated results were verified by comparing with the measured EMG data. The analysis showed that squatting using free weight is more effective than squatting using the Smith machine. Meanwhile, in order to design an improved Smith machine, which is the final goal of this study, the trajectory of the barbell of the subjects during free weight squatting was measured on the sagittal plane. The measurement showed that the average slope of the trajectory of the barbell is tilted backward by $10.7^{\circ}$. Based on this measurement, this study proposes a tilted design for an improved Smith machine.

• Korean Journal of Optics and Photonics
• /
• v.1 no.2
• /
• pp.217-222
• /
• 1990

A general ray tracing scheme has been developed for using a personal computer which trace finite rays through any non-rotationally symmetric system. This scheme may be used for the surface type such as conic section with or without aspherics, toric surfaces, sagittal and tangential cylindrical sections and axicons. Specially, any combinational of decentered, tilted and rotated surfaces has been considered. Before transfering to the next surfaces, the local coordinates are refered back to an initial reference coordinate system. We can get a mathmtical model of a non-rotationally symmetrical finite ray trace running on an inexpensive personal computer.