• 한국전자파학회논문지
• /
• 제12권5호
• /
• pp.705-712
• /
• 2001

본 논문에서는 다이폴 야기 배열 안테나의 동작 원리를 개구 급전 마이크로스트립 패치 안테나에 적용하여 틸티드 빔(tilted beam) 특성을 가지는 패치 안테나를 제안하고 그 특성을 실험적으로 고찰하였다. 제안된 안테나는 구동 패치, 반사 패치, 유도 패치들의 크기, 각 패치 간 간격, 유전체 기판의 두께와 유전율, 그리고 급전 방법 등에 의해 성능 변화 및 특성이 좌우되기 때문에, 본 논문에서는 이득과 빔 틸팅에 큰 영향을 미치는 변수들을 찾아내고 이들에 의한 성능 trade-off을 통해 빔 틸티드 개구 급전 마이크로 스트립 패치 안테나를 설계 제작하고 반사 손실과 빔 패턴에 대한 설계 및 측정 결과를 비교 분석하였다. 제작된 안테나는 공진 주파수인 2.58 GHz에서 앙각 방향에서의 주 빔은 45$^{\circ}$틸티드 특성을 가지고 있으며, 시뮬레이션 빔 패턴과 잘 일치하는 것을 확인하였다.

• 한국정보전자통신기술학회논문지
• /
• 제1권2호
• /
• pp.57-63
• /
• 2008

In this paper, we develop the Hipass antenna that is used in electronic tall-gate charging (ETC) system in Korea expressway. This antenna has circular polarized characteristics, and especially has 45 degree tilted beam properties. These properties are very effective in ETC communication between the vehicle antenna and the tall-gate antenna. To achieve these properties on a small microstrip type antenna structure, we propose a annular ring microstrip antenna with stubs. When the length and angle of stubs are changed, the direction of the circular polarized beam is generally tilted by $45^{\circ}$ in elevation angle. Especially, by using the stubs in inner area or outer area of ring antenna, it is found that the beam direction of in azimuth angle can be rotated.

• 한국전자파학회논문지
• /
• 제27권5호
• /
• pp.416-423
• /
• 2016

본 논문은 광대역 시스템에서 이용 가능한 빔 틸트 특성을 가지는 Conformal 구조의 $1{\times}4$패치 어레이 안테나를 설계 및 제작하였다. E자 형태의 패치 안테나 및 L-probe 급전 방식을 이용하여 광대역 단일 패치를 설계하였고, 전방으로 20도의 빔 틸트 특성을 얻기 위해 $1{\times}4$ 안테나 어레이를 T-junction 전력분배기와 42 psec의 마이크로스트립 전송선을 이용하였다. 3.6~4.4 GHz에서 9 dB 이상의 반사 손실이 측정되었으며, 3.75~4.25 GHz에서 10 dBi 이상의 안테나 이득을 가지며, 30도 이하의 HPBW 특성이 측정되었다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.I
• /
• pp.450-452
• /
• 2005

The ion beam alignment technique is one of the potential and fascinating methods. However, there are merely a few reports about aligning nematic liquid crystals (NLCs) horizontally for in-plane switching mode (IPS) by means of low energy ion beam exposure on inorganic materials such as DLC. In this study, we have investigated the tilted vertical alignment of NLC by the ion beam technique on the thin films of various amorphous silicon compounds as new inorganic alignment materials. Appropriate pretilt angles of NLC with preferred orientation on these thin films were achieved. And the electro-optic property of vertically aligned single domain cells has been investigated.

• 한국전자파학회논문지
• /
• 제14권2호
• /
• pp.202-208
• /
• 2003

본 논문에서는 기생 패치와 구동기 패치가 서로 다른 층에서 H-plane 에지 결합과 broadside 결합을 통해 고이득과 큰 틸팅 각도를 얻을 수 있는 위성 방송 수신용의 마이크로스트립 패치 배열 안테나를 제안하였다. 제안된 안테나는 고가의 유전체 기판 대신에 폴리에스터 동장 적층 필름과 폼을 사용하여 16$\times$8 배열로 설계 제작되었으며, 이득 22.9 dBi, 3dB 빔 폭 4.6$^{\circ}$, 그리고 broadside 방향에서 43.9$^{\circ}$기울어진 빔 특성을 가지고 있다.

• Steel and Composite Structures
• /
• 제23권1호
• /
• pp.67-85
• /
• 2017

This study investigates numerically the behavior of tilted angle shear connectors embedded in solid concrete slabs. Two different tilted angle connectors were used, titled angle with 112.5 and 135 degrees between the angle leg and steel beam flange. A nonlinear finite element model was developed to simulate and validate the experimental push-out tests. Parametric studies were performed to investigate the variations in concrete strength and connector's dimensions. The results indicate that the ultimate strength of a tilted angle shear connector is directly related to the square root of the concrete compressive strength. The effects of variations in the geometry of tilted angle connectors on the shear capacity are discussed in details. Based on the numerical analyses, two equations are proposed to estimate the ultimate capacity of tilted angle shear connectors of 112.5 and 135 degrees in the defined range of parameters.

• 한국광학회:학술대회논문집
• /
• 한국광학회 1998년도 제15회 광학 및 양자전자 학술발표회 논문집
• /
• pp.112-112
• /
• 1998

• 한국표면공학회지
• /
• 제43권4호
• /
• pp.176-179
• /
• 2010

The InAs thin films were grown on GaAs(100) substrate with $2^{\circ}C$ tilted toward [$0\bar{1}\bar{1}$] with different As beam equivalent pressure (BEP) by using molecular beam epitaxy. Growth temperature and thickness of the InAs thin films were $480^{\circ}C$ and 0.5 ${\mu}m$, respectively. We studied the relation between the As BEP and the properties of InAs thin films. The properties of InAs thin films were observed by reflection high-energy electron diffraction (RHEED), optical microscope, and Hall effect. The growth, monitored by RHEED, was produced through an initial 2D (2-dimensional) nucleation mode which was followed by a period of 3D (3-dimensional) island growth mode. Then, the 2D growth recovered after a few minutes and the streak RHEED pattern remained clear till the end of growth. The crystal quality of InAs thin films is dependent strongly on the As BEP. When the As BEP is $3.6{\times}10^{-6}$ Torr, the InAs thin film has a high electron mobility of 10,952 $cm^2/Vs$ at room temperature.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1994년도 제7회 학술발표회 및 한·일 CVD 심포지움 논문개요집
• /
• pp.98-99
• /
• 1994

• 한국태양에너지학회 논문집
• /
• 제24권3호
• /
• pp.19-25
• /
• 2004

The measured solar radiation incident on tilted surfaces by all directions has been widely used as important solar radiation data in installing photovoltaic modules. To maximize the incident beam radiation, the slope, which is the angle between the plane of the surface in question and the horizontal, an4 the solar azimuth angles are needed for these solar photovoltaic systems. This is because the performance of the solar photovoltaic systems is much affected by angle and direction of incident rays. Recognizing those factors mentioned above are of importance, actual experiment has been performed in this research to obtain the an91e of inclination with which the maximum incident rays can be absorbed. The results obtained in this research could be used in installing optimal photovoltaic modules.