In order to know growing habit of the maize bearing tillers, IK//IRI/B68 with tillers was grown and compared with Jinjoo Ok which is not tillering, and several parameters were measured for analysis. The results obtained were summarized as follows. 1. The plant height and fresh weight of IK//IRI/B68 were lower than those of Jinjoo Ok until the tasseling stage of IK/ /IRI/B68, while then plant height and fresh weight of IK//IRI/B68 were higher than those of Jinjoo Ok after the tasseling stage of IK//IRI/B68. 2. The average number of tillers per plant of IK//IRI/B68 at maturity was 3.7 and the average tiller height of IK//IRI/B68 was almost the same as the height of the main stem. 3. The dry weight of IK//IRI/B68 at the early growing stage was lower than the check hybrid Jinjoo Ok, while it was higher than Jinjoo Ok at the later growing stage. 4. The LAI of IK//IRI/B68 after full expansion of the leaves was greater than that of Jinjoo Ok The LAIs of IK//IRI/B68 and Jinjoo Ok were 12.6 and 5.8, respectively. 5. The CGR of Jinjoo Ok was greater than that of IK//IRI/B68 until earey July while the CGR of Jinjoo Ok was lower than that of IK//IRI/B68 as the tillers of IK//IRI/B68 were fully developed. 6. The LAR and RGR of IK//IRI/B68 were greater than those of Jinjoo Ok until mid-July. The RGR of IK//IRI/B68 seemed to be affected by both NAR and LAR. The RGR of Jinjoo Ok seemed to be affected by LAR.
A field experiment was conducted to know the feasibility of direct-seeded rice. Dry seeds of a Japonica type rice variety, Donghaebyeo, was sown from May 10 to June 20 at the 10-day intervals. The number of days from seeding to emergence decreased as planting date delayed; 13, 12, 10, 9, and 7 days at May 10, May 20. May 30. and June 10 seedings, respectively. The number of maximum tillers per ㎡ was about 700-800 at all the seeding dates and effective tiller ratio ranged 40-45%. The number of days from seeding to heading decreased as seeding date delayed; from 97 days at May 10 planting to 71 days at June 20 planting. The cumulative effective temperature (mean air temperature-15$^{\circ}C$) from seeding to heading was fairly constant having 870$^{\circ}C$ with 2.3% C.V. The number of panicles per unit area at June 10 planting was higher than that of other planting dates. Panicle length and the number of spikelets per panicle tended to decrease as seeding date delayed. The number of spikelets per unit area, 1000-grain weight, and grain yield were similar among the seeding dates except June 20 seeding. At the June 20 seeding the number of spikelets and grain yield were much lower, but 1000-grain weight was higher compared with other seeding dates. Grain fertility and percent ripened grains was similar among all seeding dates.
The studies were conducted to escape for laber concentration during rice harvest and barley sowing through the scattering sowing before rice harvest(SS) compared to the drilling on high ridge(DS) of barley from 1990 to 1994. There were longer in plant height and more in tiller number under the SS than those under the DS of barley while cold-injured leaves of barley were inversely affected by two different sowing methods. The barley growth was more vigorous in the DS. There was similar at heading and maturing date. The grain yield of barley was lower in the SS by 20.6% which was resulted from the reduction of spike number per m$^2$ and number of grain per spike. There was not significant at growth and yield for sowing date before rice harvest. The variation of successive years on growth, yield and its components were higher in the SS than those in the DS.
To find out the optimum seeding rate in corrugated water seeded rice, field experiment was carried out at Yeongdeog Substation of the National Yeongnam Agricultural Experiment Station for two years, 1994 and 1995. A rice cultivar Donghaebyeo, was seeded on May 15 with five seeding rate from 3kg /10a to 7kg /10a. The number of seedling stand per unit area was curvilinearly increased with seeding rate. In characteristics of rice plant associated with lodging, the plant height, fresh weight per tiller, Culm wall thickness and ratio of gravity center were not significantly different among seeding rates, but the breaking strength of 4th internode was slightly decreased with increasing seeding rate and thus, lodging index was generally greater at higher seeding rate than lower seeding rate. Field lodging was observed at 1~3 degree in seeding rate of 5~7kg /10a. Panicle number per unit area was generally increase with increase of seeding rate, while ratio of ripened grain was decreased with increase of spikelet number. Milled rice yield was curvilinearly increased with seeding rate. The optimum seeding rate in the highest rice yield was 4.8kg /10a in 1994, and 4.3kg /a in 1995, respectively.
Variation in ploidy level of regenerated plants from rice anthers and effective diploidization methods of haploid plants were studied to obtain basic information in rice breeding through anther culture. In a total of 574 plants derived from anther culture using 14F$_1$ hybrids as materials, there were 49.7% haploids, 48.6% diploids and 1.7% polyploids, respectively. The frequency of haploids in Japonica/Indica crosses was 60.6%, and that of Japonica/Japonica crosses was 43.0% in average. Inclusion of 2.4-D or NAA as phytohormone may increase the frequency of haploids, but kinetin may increase the frequency of diploids. The rate of auto-diploidization by tiller separation of haploid plants showed 8.2% in average. The rate of diploidization by leaf-sheath injection of colchicine showed 18.8% in average. Morphological characters of haploids plants showed that 64.6% in culm length, 63.4% in panicle length, 68% in flag leaf length, and 74.4% in flag leaf width compared to diploid plants. These apparent morphological differences will contribute to identify the ploidy of plants derived from rice anther culture.
Journal of Practical Agriculture & Fisheries Research
/
v.5
no.1
/
pp.64-76
/
2003
This study was conducted in order to find out the basic data and informations for the accidents for repairing of agricultural machines. This study was summarized as fellows : 1. Among the total repair work, the ratio of repair accident was 68.9% and the accident ratio with power tiller, tractor, and combine was 84.8%. The accident occurred frequently in April to May and September to October because of frequent use of machines during this months. The accidents occurred often of ten to eleven and two to three afternoon in a day. 2. The 36.3% of the accident types was farming machines and the 60.4% of the accident occurred in yard of repair shop. The 34.4% of accident was caused by people, 26.2% by machines, 24.9% by environmental factors, and 14.5% by others. 3. In accident damage, human damage was 98.4% and economic damage was 43.6%. There was only 40.2% in having agricultural machinery insurance and 22.5% of research applicant answered that they would not have insurance in the future. 4. The 58.2% of the injured parts occurred in fingers, hands, wrists, or arms and the 74.4% of the damage types were bruise, prick or abrasion. The damaged parts of machinery were belt of power transmission device, chains, sharpened knives, narrow mechanism or cultivating knives for rotary. 5. The average days of medical treatment for casualty was 15.5 days and the average expense of medical treatment per person was 189,200 won. The days of temporary rest and the economic damage per person due to accident were 12.8 days and 469,300 won.
This experiment was conducted to identify the growth and yield differences in rice cultural types: Broadcasting on flooded paddy surface(BF), drilling on flooded paddy surface(DF), puddled-soil drill seeding(PD), drill seeding on dried paddy flat(DD), and machine transplanting of lO-day old seedling(MT) at National Honam Agricultural Experiment Station in 1995. Among the cultural types of direct seeding, the number of seedling stand showed high in order of DD>BF>DF>PD. Tillering at early growth stage was faster in MT and effective tiller showed higher in MT than in direct seeding. Growth duration from seeding to heading was longer in direct seeding than in MT for 2-13 days of Dongjinbyeo and 10-18 days of Nonganbyeo. Root distribution ratio at the surface soil revealed high in order of BF>DF>PD>DD and MT. Culm wall thickness of 4th internode was thicker in machine transplanting of 10-day old seedling than in direct seeding, and the depth of buried culm showed deep by turns of MT> DD>PD>DF and BF. The height of center gravity and moment related to lodging revealed higher in direct seeding than machine transplanting that resulted high lodging index by turns of BF>DF>DD> PD among the direct seeding cultural type. Lodging was occured seriously in the order of BF>DF>PD>DD =MT in Dongjinbyeo but wasn't significantly different in Nonganbyeo among the cultural type. The yield components and grain yield showed varietal differences but was not significantly different between in MT and in direct seeding, and among cultural types of direct seeding.
From a series of studies conducted on the local maize lines at the Agr. College of the Chungnam National Univ., a few maize lines with many tillers and ears per plant were identified and tentatively named as MET. The purpose of the study was to evaluate the MET lines, which were selfed for five generations, for silage purpose under the different plant densities. A hybrid, Suwon #19 and a synthetic variety, Puyo #3${\times}$#2, were included for comparison. Plant height at harvesting times showed no significant varietal differences. However, the MET lines were very slow in early plant growth compared to the hybrid or synthetic variety, probably due to inbreeding depression of the MET lines. Total fresh weight at the harvesting times was highest in the MET 1 line. The MET 1 line was about 2,000 kgr. per 10a. higher than the hybrid at the harvesting time. The highest fresh weight was obtained when grown under the plant density of 60 ${\times}$ 20cm. Total dry weight per unit area showed the same tendency as the fresh weight. Total dry weight of MET 1 line was about 2.4 tons per 10a., which was about 10% higher than the hybrid, Suwon #19. As the fresh weight, the total dry weight was also highest in the plant density of 60 ${\times}$ 20cm. The grain yield per 10 are of MET 1 was comparable to the grain yield of the hybrid, especially in the low plant density, 60 ${\times}$ 40cm. The average number of effective tillers of MET lines were 4.5, while the mean tiller number of the hybrid or synthetic variety were none. However, the lodging was one of the problem for growing MET lines. The 100 kernel weight of MET lines was about 9 gr., while the 100 kernel weight of the hybrid or synthetic variety was about 30 grm.
Journal of Practical Agriculture & Fisheries Research
/
v.19
no.1
/
pp.119-128
/
2017
The field trial was performed to evaluate the rice growth and yield in different direct seeding methods. The required time for seed emergence was for 8~ 9days in the tested direct seeding methods and there was high in seedling establishment according to wet hill-seeding with iron-coated seeds> wet hill-seeding with soil coverage>water seeding with iron-coated seeds and water seeding with pregerminated seeds as the conventional treatment. The rice plant height was taller in wet hill-seeding methods than that of water seeding with broadcasting method but there was not significant difference in terms of statistical analysis at 75day after seeding except the water seeding with pregerminated seeds. The growth of tiller number in the rice plant was highest in water seeding with iron-coated seeds. The milled rice yield was highest in water seeding with iron-coated seed being with 6.4t/ha and percentage of head rice was the highest in wet hill-seeding and water seeding with iron-coated seeds.
Bo Min Bae;Dae Wi Jung;Dong Hyung Ryu;Jang Hyeon An;Se O Choi;Yeon Soo Kim;Sang Dae Lee;Seung Je Cho
Journal of Drive and Control
/
v.20
no.4
/
pp.115-122
/
2023
This study utilized a discrete element method (DEM) simulation, as one of the virtual field trials, to predict the impact of tillage depth on the rotary blade shaft during rotavator tilling. The virtual field for the simulation was generated according to soil properties observed in an actual field. Following the generation of particles for the virtual field, a sequence of calibration steps followed to align the mechanical properties more closely with those of real soil. Calibration was conducted with a focus on bulk density and shear torque, resulting in calibration errors of just 0.02% for bulk density and 0.52% for shear torque. The prediction of the load on a rotary tiller's blade shaft involved a three-pronged approach, considering shaft torque, draft force, and vertical force. In terms of shaft torque, the values exhibited significant increases of 42.34% and 36.91% for every 5-centimeter increment in tillage depth. Similarly, the vertical force saw substantial growth by 40.41% and 36.08% for every 5-centimeter increment. In contrast, the variation in draft force based on tillage depth was comparatively lower at 18.49% and 0.96%, indicating that the effect of tillage depth on draft force was less pronounced than its impact on shaft torque and vertical force. From a perspective of agricultural machinery research, this study provides valuable insights into the DEM soil modeling process, accounting for changes in soil properties with varying tillage depths. These findings are expected to be instrumental in future agricultural machinery design studies.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.