• Korean Journal of Poultry Science
• /
• v.10 no.1
• /
• pp.35-45
• /
• 1983

This experiment was performed to compare the techniques of the metabolizable energy determination and to, examine the problems associated with metabolizable energy determination of poultry feedingstuffs. The feedingstuffs evaluated herein, were corn, sorghum, barley. fish meal and soybean meal The results obtained were as followings : 1. When comparing AME and AMEn values of five feedingstuffs(measured) by Total Collection ana Index Methods there was no significant difference (P＞.05) between two methods except fish meal. 2. The AME$_{F}$ values of feedingstuffs were not different (P＞.05) from AME values. which implied that bioassay of AME$_{F}$ be applicable to rapid measure AME value of feedingstuffs for poultry and the problems connecting to AME$_{F}$ determination were discussed. 3. The AME$_{FC}$ and TME values of corn, sorghum and barley were significantly higher (P＜.05) than AME and AME$_{F}$ values but those of fish meal and soybean meal were similar or lower than AME and AME$_{F}$ values. This fact was indicative that the techniques measuring AME$_{FC}$ and TME has some depressing factors when fish meal and soybean meal were determined. 4. Comparing of TME, AME$_{FC}$ and T-AME values tile TME values of corn sorghum and barley were significantly higher(P＜.05) than AME$_{FC}$ and T- AME values. But that of fish meal and soybean meal was much lower(P＜ .05)comparing with AME$_{FC}$ and T-AME values. According]y, it night be concluded that the relationship among the values of TME. AME$_{FC}$ and T-AME was shown great variation according to the feedingstuffs, especially in the protein diets.

• Land and Housing Review
• /
• v.8 no.3
• /
• pp.189-200
• /
• 2017

The work breakdown structure and the precedence relations by work activity are very important because they are the basic data for estimating the construction duration in the construction work. However, there is no standard to accurately estimate the construction duration since the size of the school facilities construction is smaller than the general construction work. Therefore, some schools are unable to open in March or September and the delay of the construction duration can cause damage to the students. To solve this problem, this study developed a work breakdown structure of school facilities construction work and analyzed the precedence relations by work activities. The work breakdown structure of the school facilities construction is composed of three steps. The operations corresponding to level 1 and level 2 are as follows. (1) 2 preparatory work categories; preparation period and temporary construction. (2) 17 architectural work categories; temporary construction, foundation & pile work, reinforced concrete work, steel roof work, brick work, plaster work, tile work, stone work, waterproof construction, wood work, interior construction, floor work, metal work, roof work, windows construction, glazing work and paint construction. (3) 7 mechanic and fire work categories; outside trunk line work, plumbing work, air-conditioning equipment work, machine room work, city gas plumbing work, sanitation facilities and inspection & test working. (4) 4 civil work categories; wastewater work, drainage work, pavement work and other work. (5) 1 landscaping work categories; planting work. The work breakdown structure was derived from interviews with experts based on the milestones and detailed statements of existing school facilities. The analysis of precedence relations by school facilities work activity utilized PDM(Precedence Diagramming Method)which does not need a dummy and the relations were applied using FS(Finish to Start), FF(Finish to Finish), SS(Start to Start), SF(Start to Finish). The analysis of this study shows that if one work activity is delayed, the entire construction duration may be delayed because the majority of the works are FS relations. Therefore, it is necessary to use the Lag at the appropriate time to estimate the standard construction duration of the school facility construction. Lag is a term used only in the PDM method and it is used to define the relationship between the predecessor and the successor in creating the network milestone. And it means the delay time applied to the two work activities. The results of this study can reasonably estimate the standard construction duration of school facilities and it will contribute to the quality of the school facilities construction.

• Journal of Trauma and Injury
• /
• v.20 no.1
• /
• pp.26-32
• /
• 2007

Purpose: Hemorrhagic shock is the leading cause of death in patients with pelvic bone fractures. The majority of blood loss is due to injured pelvic arteries and retroperitoneal veins and to bleeding from the fracture site itself. Pelvic angiography and embolization of injured vessels is an effective way to control continuous bleeding. However, identifying the bleeding focus in hemodynamically unstable patients before diagnostic intervention is difficult. The purpose of this study was to determine the correlation between fracture patterns in hemodynamically unstable patients with pelvic fractures and later pelvic angiography findings. Methods: We performed a retrospective study of 21 hemodynamically unstable patients with pelvic fractures admitted to our emergency department between April 2001 to April 2006. All 21 patients underwent pelvic angiography. Pelvic fractures were assessed according to the Tile's classification and the degree of injury was assessed using the Injury Severity Score (ISS) and Revised Trauma Score (RTS). The hemodynamic status of the patients was defined using vital signs, base excess, and blood lactate. Fracture patterns were compared with hemodynamic status and angiography findings. Results: In the 5year study period, 21 hemodynamically unstable pelvic bone fracture patients were admitted; ten were men (47.6%), and 11 were women (52.4%). The mean age was 41.1 years (range: ${\pm}20.1$). Of the 21 embolization was performed in 6 patient (28.6%): 1 patient of the 5 unstable pelvic bone fracture patients (20%), and 5 patients of 16 the stable pelvic bone fracture patients (31.3%). There were no significant differences between the RTS (p=0.587) and embolization rate (p=0.774) for either the stable patients or the unstable patients. Patients with arterial injury on angiography had a lower RTS compared with patients without arterial injury but there was no significant difference in ISS between the two groups. The angiographic injured sites were five internal femoral arteries and one external femoral artery. Conclusion: The findings in this study suggest that the pelvic fracture pattern in hemodynamically unstable patients with pelvic fractures does not correlate with pelvic angiography findings.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.275-275
• /
• 2010

국제핵융합실험로 (ITER)의 블랑켓 일차벽 조달 자격 획득을 위한 검증시험을 수행하여 1단계를 2009년 완료하였고, 2단계는 2011년 예정으로 진행 중이다. 우리나라는 이미 1단계 검증시험에서 2 개의 일차벽 목업 (First Wall Qualification Mockup ; FWQM)을 제출하여 시험을 성공적으로 통과하였고, 2단계 검증 시험을 위해 semi-prototype 제작 기술 및 시험 기술을 개발 중이다. 블랑켓 일차벽 검증 시험 및 제작 기술을 확보하기 위한 고유접합법 개발을 위해서 표준 크기($80\;mm{\times}80\;mm$)의 목업을 제작하여 국내 고열부하 시험 시설에서 접합 방법의 타당성을 확인하였다. 표준목업은 HIP (Hot Isostatic Pressing) 접합법으로 stainless steel과 Cu 냉각부를 제작하고, 다시 $80\;mm{\times}80\;mm$ Be tile을 HIP 방법으로 냉각부에 접합하여 제작한다. 고유접합법 개발을 위해서 Be과 Cu 냉각부 계면에 Cr($1\;{\mu}m$)/Cu($10\;{\mu}m$), Ti($5\;{\mu}m$)/Cu($10\;{\mu}m$) 층을 코팅하여 Be 접합 성능을 개선하였으며, 기존의 접합 계면과 차별화된 기술을 확보하였다. 표준목업의 전체 크기는 $80\;mmW{\times}80\;mmL{\times}84\;mmH$ 이고, 1차로 총 6개, 2차로 4개를 제작하였으며 제작 과정 및 제작 전후에 파괴검사, 비파괴검사를 수행하여 접합의 건전성을 확인하였다. 제작 완료된 표준 목업은 냉각 관로를 장착하여 국내의 고열부하 시험시설인 KoHLT-1에 장착하여 성능 시험을 수행하였다. 고열부하 시험 시설의 냉각수 조건은, 온도 $25^{\circ}C$(실온), 유량 0.15 kg/sec이고, 고열 부하 조건에서는 0.5, 1.0, $1.5\;MW/m^2$의 screening 시험을 거친 후 1.5 MW/m2에서 cycle 시험을 진행하였다. 각 목업의 고열부하 시험을 마친 후 비파괴 검사의 일환으로 UT(Ultrasonic test) 시험을 수행하여 열부하 시험 전후의 목업 건전성을 확인하였다. 고유접합법을 이용하여 개발한 표준 목업의 고열부하 시험을 통해서 접합법의 타당성 및 건전성을 확인하였고, 향후 블랑켓일차벽 조달 검증 2단계 시험에서 semi-prototype 제작 및 고열부하 시험에 대비하고, ITER 관련 핵심 기술 개발 목표를 달성할 것이다.

• Korean Journal of Soil Science and Fertilizer
• /
• v.35 no.4
• /
• pp.207-215
• /
• 2002

Changes in salinity, hydraulic conductivity and penetration resistance in a reclaimed tidal land reclaimed in 1986 were studied. The salinity monitoring based on electrical conductivity of saturated extract, ECe, was conducted from 1994, when the land use for experimental crop production started after tile drainage. The site was abandoned since 1999. The hydraulic conductivity was measured by a sand fill auger hole method, and the resistance was measured with a dynamic penetrometer in situ. The averaged ECe in 1994 was $33.7dS\;m^{-1}$ ranging from 25.5 to $44.8dS\;m^{-1}$, and was decreased to $25.7dS\;m^{-1}$ with large range from 0.8 to $70.3dS\;m^{-1}$ before experiment was $1.89{\times}10^{-7}m\;s^{-1}$. It increased to $1.32{\times}10^6m\;s^{-1}$ in the top 20-cm soil with large variability, while it showed $3.44{\times}10^7m\;s^{-1}$ beneath the 20-cm soil depth with less variability. The penetration resistance of the soil ranged from 0.05 to 9.99MPa. The vertical distribution of penetration resistance indicated the hardened layer was developed at the depth of 20~40 cm where the hydraulic conductivity was sharply decreased.

• Journal of Preventive Medicine and Public Health
• /
• v.16 no.1
• /
• pp.25-30
• /
• 1983

This research is to examine the detoxication effect of methionine on cadmium intoxication For this purpose, this paper provides an analysis of the data on the groups of mice (ICR), one group of mice treated with 40 ppm of cadmium only. and other groups of mice combined-treated with cadmium and 0.1%, 0.25%, 0.5% and 1% methionine. After breeding for 40 days, the data on the growth of mice, changes in activation of alkaline phosphatase in blood, and the cadmium content in the liver and kidney, are analysed. The results were as follows: 1) The growth-rate of mice, in the cadmium only injected group, was declined by 9% in comparison with the control group after 40 days. But the two groups of cadmium with 0.5% and 1% methionine showed the rise of 9% ana 14% respectively above the growth-rate of the control group. The results from the groups of cadmium with 0.1% and 0.25%, methionine were similar to that from the cadmium only injected group. 3) Changes in activation of alkaline phosphatase in blood decreased to 86.45% in the cadmium only injected group behind the 100% activation of the control group. The groups of cadmium with 0.1% and 0.25% methionine showed no difference with the former group. But the groups of cadmium with 0.5% and 1% methionine recovered to the 93.14% and 96.08% of activation respectively. 3) The mean content of cadmium in the liver was $0.028{\pm}0.001{\mu}g/g$ in the control group. The cadmium only injected group showed the mean cadmium content of $2.80{\pm}0.62{\mu}g/g$ in the liver, which was similar to $2.82{\pm}1.03{\mu}g/g$ in the group of cadmium with 0.1% methionine, and $2.56{\pm}0.77{\mu}g/g$ in the group of cadmium with 0.25% methionine. But the groups of cadmium with 0.5% and 1% methionine showed the reduction of cadmium contents in the liver to $1.84{\pm}0.56{\mu}g/g$ and $1.74{\pm}0.35{\mu}g/g$ respectively. In the kidney, the groups of cadmium with 0.1%, 0.25% and 0.5% methionine shelved the similar cadmium content to the group treated with cadmium only. But the group of cadmium with 1% methionine showed a small increase to $4.13{\pm}1.00{\mu}g/g$ in comparison with the group treated with cadmium only. This analysis proves that the mobility and diffusion of cadmium in tile tissues advance faster ill the group treated with cadmium and methionine than in the group treated with cadmium only.

• Journal of Life Science
• /
• v.13 no.4
• /
• pp.529-534
• /
• 2003

This study was done to investigated the phytosterol compositions of safflower (Carthamus tinctorius L.) seed. The phytoestrogen activity was also determined using CAT-ELISA Kit in ethanol extract of safflower seed. The phytosterol of safflower seeds was identified using gas chromatography-mass spectrometry after saponification of the oils. The phytosterol content and composition of safflower seed oils were 4% and identified stigmast-5-en-3-ol (3$\beta$, 24S)-form, ${\gamma}$-sitosterol (clionasterol) with Wiley MS spectrum library. The synergistic effect of human estrogen receptor (hER) has been investigated using a minimal chimeric promoters composed of the TATA region of the adenovirus-2 major late promoter (A22MLP) and two consensus perfectly polindromic Xenopus vitellogenin A2 gene estrogen responsive elements (XVEREl19). Transient transfection experiments in tile human breast adenocarcinoma cell line MCF-7, which is known to express the estrogen receptor endogenously, revealed that phytoestrogen from Carthamus tinctorius L. acts as estrogen. We have observed the transcriptional activities stimulated methanol and ethanol extract of safflower seed in MCF-7, were 0.43 and 0.37 respectively, compared to that by $\beta$-estradiol as 1.0. Our data showed that safflower seeds have estrogenic activity methanol and ethanol extracts and ethanol lower than that of $\beta$-estradiol. This result provides the first evidence that the beneficial effect of safflower seeds may be mediated, at least in part, by the stimulating effect of phytoestrogen ell bone-protecting.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.18 no.6
• /
• pp.455-463
• /
• 1998

RCCA(rod cluster control assembly) End-Tip suffers from neutron irradiation and constant vibration due to high-speed internal flow of primary coolant during plant operation. Such operating conditions cause the RCCA end-tip crackings around tile circumferential weldment of the end-tip, and in some cases, the defective end-tips were completly broken loose. However, no reliable inspection techniques for end-tip crackings were developed in the past, although some techniques exist for inspecting RCCA control rod wears. Therefore, NDE group at KEPRI has developed an ECT technique for the detection and the sizing of the end-tip crackings. The technique uses a specially designed surface-riding probe that can detect size of circumferential crackings with an accuracy of ${\pm}5.31%$ RMS error. This paper describes the ECT instrumentation including the ECT probes, calibration bars, as well as technical approaches.

• Korean Journal of Ecology and Environment
• /
• v.35 no.4 s.100
• /
• pp.257-265
• /
• 2002

The current study was performed to elucidate the relationship between the anatoxin -a produced by cyanobacteria and aquatic environmental factors, Algal and water samples were collected from the Daechung Reservoir from June to November 2001. The physical factors of the water quality were measured in sifu, while the biological and chemical factors were examined in the laboratory. The concentrations of anatoxin-a in the algal and water samples were analyzed by HPLC using a fluorescence detector, and ranged from $0.61-8.68\;{\mu}g/g$ dw in the algal samples and $0.01-0.08\;{\mu}g/L$ in the water samples. The suggested maximum concentration of anatoxin-a for safe drinking water is $1\;{\mu}g/L$. The concentrations of anatoxin-a in the algal and water samples were highest in July. The relationships between tile aquatic environmental factors and the anatoxin-a concentration were also analyzed to identify the crucial elements for toxin production. The anatoxin-a concentrations in the algal samples exhibited a high correlation with nitrate, the TN/TP ratio, TDN (P<0.05), and TPN/TPP ratio (P<0.01), whereas the anatoxin-a concentrations in the water samples were highly related to the water temperature, conductivity (P<0.01) , pH, phycocyanin, and phycocyanin/chlorophyll a ratio (P<0.05).

• Korean Journal of Ecology and Environment
• /
• v.42 no.1
• /
• pp.124-133
• /
• 2009

Effects of substrates on the relative immigration activities (RIAs) of epilithic diatoms were examined in Sum River, a tributary of South Han River, Korea. Two hundreds of tile substrates coated with 5% agar were deposited at seven study stations (30 tiles per site) for one month from March 7 to April 7, 2008. Water sampling, physico-chemical factor measurement, and diatom analysis were performed in the field and laboratory. Over the study, major epilithic diatom species were Nitzschia amphibia, Navicula subminuscula, Cymbella minuta in both the natural and artificial substrates. Two dominant species, Nitzschia amphibia and Cymbella minuta often found at seven stations. Among all observed taxa, Nav. subminuscula and Caloneis silicula showed the highest RIA, with the value over 15 throughout the study. Regarding the algal morphology, the biraphe type species showed higher RIA than any other morph, while they comprised over 55% of total biomass, indicating a density effect. Additionally, a significant relationship between RIA and 20-day deposited substrate (p<0.05) showed in two diatom species, Nitzschia fonticola, Gomphonema quadripunctatum, which showed relatively high RIAs. These results indicate that the relative immigration activities of epilithic diatom species can be influenced by algal density in the water and substrate, nutrients, and deposited time at least 20 days.