• Journal of Korean Ophthalmic Optics Society
• /
• v.14 no.3
• /
• pp.17-27
• /
• 2009

Purpose: This review article was written to determine the effects of parameters characterizing a hard contact lens (RGP included), such as BCs, diameters, edge angles, on the time interval for tight fitted lens to return to the equilibrium when it was decentered from blinking. Methods: A mathematical formulation was established to relate or calculate the restoring forces and thickness of lacrimal layer beneath the cornea with the various lens parameters when the tight fitted lens was decentered from blinking. Based on this formulation the differential equations and their numerical solution program were set up to describe the time dependence of the lens on the position and to estimate the time for the lens's return to the equilibrium after blink. Results: It is found that the time interval for the tight fitted lens to return to the equilibrium decreases as either the BC decreases or the diameter increases because both the reduction in BC and increase in diameter result in the increase in the lacrimal layer thickness between the lens and cornea increase which yielded the lowering of the viscous friction in the lens motion. As the edge angle of tight fitted lens increases the time for recentering decreases due to the increase in restoring force without change in lacrimal thickness beneath the lens. In the case of flat fitted hard lens (RGP included), the lacrimal layer thickness under the lens increases as either BC or diameter increases which results in reduction in viscous friction so that the time for the lens's return to the equilibrium were to decrease. The edge angle of flat fitted lens does not affect the lens motion. Conclusions: The effect of BCs on the lens motion (time to approach the equilibrium) was concluded to be significant with both tight and flat fitted lens where its results are contrary with each other. The edge angle of lens only affects the motion in tight fitted lenses.

• Journal of Korean Ophthalmic Optics Society
• /
• v.16 no.1
• /
• pp.97-106
• /
• 2011

Purpose: This review article was written to theoretically compare the depressing force (pressure, adhesion) to the cornea between when the spherical lenses were being tightly and flat fitted. Methods: Mathematical equations and their numerical solution programs (model) were formulated to calculate the depressing (adhesion) force to the cornea by both the tightly and flat fitted contact lenses. Based on this proposed model the effects of parameters characterizing a contact lens such as BCs, diameters, edge shape and corneal shape (ratio of long and short corneal axis, p) on the depressing force to the cornea were predicted/analyzed in both tightly and flat fitting regimes. Results: Corneal adhesion increased as the corneal p-value increased. Adhesion increase caused by the increased p-value was much larger in flat fitted case than in tight fitted one. Corneal adhesion reduced abruptly as the BC increased in flat fitting regimes while the adhesion rise was insignificant in tight fitting ones. Reduction in corneal adhesion due to lens-size increase was predicted to be insignificant in both tight and flat fitting regimes. Both the lens edge shape (edge angle) and thickness were relevant only in tight fitting regime. Corneal adhesion increased as the increased with tight-fitted lenses. As the thickness of tight fitted lenses increased, corneal adhesion inversely decreased. Conclusions: The two most significantly affecting the depressing force to cornea were found to be the degree of corneal bending toward the periphery and the BCs of lenses.

• Journal of Fashion Business
• /
• v.18 no.3
• /
• pp.91-103
• /
• 2014

Shirts which have been a inner-wear in men's suit in the past, are being changed into an item that 20's men utilize to their individuality. Dress shirts have gotten out of its shape, becoming tight and slim with activity and fashion trend. In this study, two patterns of fitted dress shirts in a clothing construction text book were compared with the pattern of an apparel company with regard to the size tolerance and appearance silhouette; this comparison was performed through a fitting test and an appearance evaluation. According to the study, size tolerance of chest girth and waist girth were about 6~8cm and 10~18cm, respectively. Neck girth of the collar was tight in both the fitting test and appearance evaluation. Thus, the measurement value of the neck base girth had to be used for the collar pattern making. Moreover, approximately 35cm is a moderate size for the width on the upper arm in sleeve. Therefor the factors such as size tolerance of waist girth, height of sleeve cap, slim sleeve width and measurement value of neck base girth are being considered for the pattern making of fitted dress shirts.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.34 no.11
• /
• pp.1824-1835
• /
• 2010

This study develops tight-fitting torso patterns for performance garments by taking into account the skin deformation generated directly from a 3D scan during arm movements. The skin deformation caused during the arm movements was scanned after scanning the skin surface stamped with a circle. To create a torso pattern in response to skin deformation, the ratio and direction of the skin deformation were first measured and analyzed so that the 3D human body could be segmented. After translating, the 3D skin surface was segmented into 2D flat patterns, designing nude patterns and reducing them as well as tight-fitting shirts: the skin deformation segment shirts were made in response to the skin deformation. The features of the fabric deformation and the garment pressure were analyzed and evaluated. In comparison with a clothing construction segment shirt, the diameter of the skin deformation segment shirt was smaller as well the ratios of extension and reduction was less. The garment pressure of the skin deformation segment shirt was higher. The skin deformation segment shirt fitted more tightly compared to a clothing construction segment shirt as it covered the body more thoroughly and was as comfortable as the other shirts with less fabric deformation made as the body moved.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.32 no.3
• /
• pp.349-361
• /
• 2008

The purpose of this study was to develop bodice basic patterns fitted on different body types of adult women. To meet this purpose, first, human bodies were measured using tight fitting technique and classified based on the shapes of upper trunk. The subjects were 214 women $20{\sim}39$ years of age. For the measurement of female upper trunk, tight fitting technique was utilized. The development of figures of upper trunks were obtained from women. These development of figures were then digitized and analysed using the PAD system. A total of 155 measurements were taken from each of the development of figures. then, 32 measurements were selected for the further analysis. As complimentary data, 22 direct body measurements using an anthropometric method and 23 body measurements using a photographic method from the side view pictures of the participants were also obtained. The results and discussions of this study are as follows: Using the body measurements from the development of figures, a factor analysis and a cluster analysis were conducted. As a result, the body types were classified into 5 different types, which differ in terms of bust volumes, shoulder slopes, shoulder tilts, back silhouettes, body axises. The prominent characteristics of each type are as follows: The first type has a large bust volume. The second type has a right figure. The third type has a rounded back silhouette. The fourth type has a back silhouette of scapular coming backward. Finally the fifth type has a shoulder tilted forward.

• Korean Journal of Human Ecology
• /
• v.15 no.6
• /
• pp.1073-1081
• /
• 2006

The development of foundation garment pattern on the typical adult women's body was carried out. By means of the flatted body surface shell, the foundation garment pattern was developed. And its fitting test also performed. The results of this study can be summarized as follows; 1. The investigated Foundation basic pattern was made by the allowing the maximum bust size without any surplus since it was based on the tight-fitted model drawing technique. The investigated the completed pattern was designed in three parts of front and back body, including bust. 2. The result showed by overlapping the torso basic pattern foundation and body surface development selected from body almost the same except for the shift of dart position. 3. The result by overlapping basic pattern 3 existing basic patterns. On the basis of top-bust line showed that the setting up the volume of dart of bust and its waist affect the appearance of model. Especially, it was found that the above result was related to the bust and under bust line. 4. The result of the wearing test of 3 existing basic patterns and basic pattern of this study revealed that the mean values of whole items were higher than average in type P and type E. The fitting & position of under-bust line and extent of wrapping bust showed the high points in the current study and type of P. The result of evaluating the whole appearance in three points(front, side, back) showed different according to the every basic foundation garment pattern.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.41 no.5
• /
• pp.929-938
• /
• 2017

This research investigated the effects of cool touch fabrics on thermo-regulating physical properties and subjective evaluation using a 3D fitted women's T-shirts in wear test. Qmax, clothing microclimate, microclimate wettedness, thermogram and subjective vote were observed during rest-right after an exercise-rest protocol. As a result, there was no single determining physical variable to explain the reasons of cool sensations of T-shirts made of cool touch fabric across the entire protocol. Qmax could partly predict a wear sensation at the initial stage when only insensible perspiration was presented. Simultaneous observation of temperature/humidity gradient understand from the inside to the outside of the clothing layer or microclimate wettedness calculated using vapor pressure were helpful to figure out the performance of cool touch fabric, especially at the later stage of the protocol when sweating was excessive. It was especially difficult to connect thermo-regulating physical variables to the subjective evaluation during transient conditions such as 'right after exercise' stage. It is necessary to measure the amount of heat and moisture transferred from the skin to the outside of clothing along with the physical properties measured in this study to understand the detailed mechanisms of why a cool sensation is evoked from tight fitting T-shirts made of newly developed cool touch fabrics.

• Journal of the Korean Society of Costume
• /
• v.50 no.8
• /
• pp.67-74
• /
• 2000

The clothing behavior of male homosexuals were examined. Especially their clothing preference, clothing purchase behavior and clothing symbols as a group took were analysed. The subject was 49 male-homosexuals and the survey was done at the tray bars in Yi-Tae-Won in Seoul. The questionnaire and interview method were broth used to collect the data. The findings from the study were as follows : 1. The casual style was mostly preferred and lightly-fitted style was more preferred than loose style. Both straight type blue jeans and tight-fit style were widely worn by the subject. 2 Among design, price, color, fashion trend and sewing quality. design was the most important factor In clothing purchase. Besides design, color and fashion trend were counted more seriously than price or sowing quality. Blue and black were preferred as clothing colors. 3. Department stores were the most popular shopping place. and then traditional markets and shops near Universities were also preferred. Over 60% of the subjects answered that the decision of clothing purchase was made by himself and 20% of the subject used friend as personal information sources. The score stimuli was the most frequently used information for apparel shopping, and fashion magazines were also used as an important information source. 4. The clothing related symbols used to represent group look were lightly-fitted style. right ear-piercing, tight-fit plaid pants, leather look, rainbow flag, bandannas, reversed triangle. etc. And the subjects thought the symbols were not meaningful as group look because they were already adopted by the non-homosexual people. And they thought that their style of fashion has influenced on that of mass.

• The Korean Journal of Community Living Science
• /
• v.28 no.4
• /
• pp.505-514
• /
• 2017

Although studies on the development of cool touch fabrics have been conducted widely, the effects of fitted pattern on enhancing the cooling sensation are insufficient. To investigate the effect of cool-touch fabric and fit of women's sports underwear, 3D and 2D patterns of sleeveless top and sports leggings were constructed. The performance of cool touch was tested by the Qmax value and wear test with nine subjects. Objective fit evaluation was observed by 3D virtual clothing using Clo software. Subjects rated wearing sensation such as 'cooling sensation, fit, wear comfort and preferences of purchase' using Likert's scale in the environmental chamber at $25^{\circ}C$, 45 %RH. The Qmax value of the cool touch fabric was higher than that of the PET fabric, which was well reflected in 'cooling sensation', especially in the case of a tight-fitted 3D pattern. The cooling sensation of the cool-touch fabric was not significantly elevated with 3D tight pattern as long as the size of the 2D pattern was similar to that of 3D pattern. However, the purchase preference was highly correlated with 3D fit and wear comfort.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.42 no.5
• /
• pp.786-798
• /
• 2018

This study is based on anthropometric data from the 7th Size Korea, we selected five subjects with measurements similar to average women in their twenties. The subjects participated in adaptability assessments and appearance assessments of skinny jeans produced by 8 selected brands, to identify the pattern and measurements characteristics of jeans assessed to be superior in appearance and movement adaptability. The results of this study were as follows. First, according to the results of appearance assessment made by the specialist group, B brand earned the highest assessment in response to questions regarding if 'there is an appropriate amount of ease in the crotch area' on the front side and 'an appropriate amount of ease in the hip circumference area' on the back side. Based on the above results, Synthesizing the survey results and the appearance assessment and movement adaptability assessment results, we suggest that when drafting the pattern for the standard size of waist measurement 27 inches (67cm), the hip circumference should be given an appropriate amount of ease, of around -6.6cm (-7.2%). The thigh circumference should be set with an appropriate amount of ease, which is -5.3cm (-9.4%).