• 제목/요약/키워드: thrusters

검색결과 234건 처리시간 0.029초

고성능 로켓노즐 및 추력기용 내열부품 현황 (Perspectives on the Hot Components for Rocket Nozzle and Thrusters)

  • 임성택;김중근;강윤구;김형원;김연철
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2008년도 제31회 추계학술대회논문집
    • /
    • pp.67-71
    • /
    • 2008
  • 추력조정이 유연한 차세대 고체추진기관 그리고 위성제어용 차세대 비냉각 액체엔진 소형추력기는 $2500^{\circ}C$급의 가혹한 작동조건에서 비삭마, 내열 내산화와 같은 내구성을 가진 내열부품을 요구하고 있다. 본 연구에서는 차세대 추진기관의 작동조건을 제시하고 그에 맞는 내열부품의 국내외 기술현황을 조사하였다. 또한 레늄(Re)을 기본으로하는, 고체 및 액체추진기관에 동시 적용이 가능한 $2500^{\circ}C$급 초고온 장수명 추력기(thruster) 내열부품의 국내연구 필요성과 방향을 제시하였다.

  • PDF

Design of an adaptive backstepping controller for auto-berthing a cruise ship under wind loads

  • Park, Jong-Yong;Kim, Nakwan
    • International Journal of Naval Architecture and Ocean Engineering
    • /
    • 제6권2호
    • /
    • pp.347-360
    • /
    • 2014
  • The auto-berthing of a ship requires excellent control for safe accomplishment. Crabbing, which is the pure sway motion of a ship without surge velocity, can be used for this purpose. Crabbing is induced by a peculiar operation procedure known as the push-pull mode. When a ship is in the push-pull mode, an interacting force is induced by complex turbulent flow around the ship generated by the propellers and side thrusters. In this paper, three degrees of freedom equations of the motions of crabbing are derived. The equations are used to apply the adaptive backstepping control method to the auto-berthing controller of a cruise ship. The controller is capable of handling the system non-linearity and uncertainty of the berthing process. A control allocation algorithm for a ship equipped with two propellers and two side thrusters is also developed, the performance of which is validated by simulation of auto-berthing.

유연한 arm의 1축 회전 기동을 위한 강인성 제어기 설계 (Robust controller design for the rotational maneuver of a flexible arm)

  • 방효충;박영웅;남문경;황보한
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
    • /
    • pp.1322-1325
    • /
    • 1997
  • A new feedback control law design techniqed usign of-off thrusters for the rotational maneuver of a flexible arm is discussed in this study. a two state on-off thruster actuator is taken as a primary actuation device for theis study. The on-off thruster operation is emulated in conjunction with the conventioal minimum-time trackig control law. The actuator input region is divided into two separate parts ; one is constant input and the other is time varying tegion. the new control law has potential applicatioin for the relatively low frequency structure such as large flexible space structure being currently used in various space echnology areas.

  • PDF

정지궤도 인공위성 추력기 모델링

  • 박응식;박봉규
    • 항공우주기술
    • /
    • 제2권2호
    • /
    • pp.96-104
    • /
    • 2003
  • 정지궤도 인공위성의 추진시스템은 위성발사에서부터 모든 임무궤도의 자세제어와 마지막 임무단계인 폐기궤도 기동을 위한 다양한 속도증분을 제공한다. 이러한 추진시스템은 위성제작사에 따라 매우 다양하게 구성되고 있으며 버스체마다 사용되는 추력기 또한 매우 다양하다. 따라서 각 정지궤도위성 제작사에서는 각각의 추진시스템에 맞는 모든 궤도 관련 임무를 계획하고 검증하는 임무해석소프트웨어를 개발하고 있다. 이러한 범용화된 임무해석소프트웨어를 개발하기 위하여 다양한 추력기 데이터를 검토하였고 이를 토대로 일반화된 추력기 모델링식을 구축하였다.

  • PDF

Development of the Hovering AUV test-bed and field test

  • Choi, Hyeung-Sik;Cho, Sohyung;Kim, Joon-Young
    • Journal of Advanced Research in Ocean Engineering
    • /
    • 제2권1호
    • /
    • pp.40-47
    • /
    • 2016
  • This paper describes the design and performance of a hovering AUV constructed at KMOU (Korea Maritime and Ocean University). Before the field test, we analyzed the dynamic performance of the AUV using a simulation program made by Matlab & Simulink. Also, a PID controller was designed to control the thrusters. Using 4 thrusters (2 vertical and 2 horizontal), the AUV could be controlled using dynamic motion with 4-DOF. A simulation and field test were conducted with way-point tracking, maintaining the desired depth. To perform way-point tracking, the AUV can be fine-tuned to the desired heading angle through the LOS (Line Of Sight) method. This paper shows the results of simulation and field tests.

사용자 운용 편의성을 위한 수중로봇 MR-1의 수조실험에 관한 연구 (A Basic Study of Water Basin Experiment for Underwater Robot with Improving usability)

  • 남건석;류제두;하경남
    • 로봇학회논문지
    • /
    • 제15권1호
    • /
    • pp.32-38
    • /
    • 2020
  • This paper describes a method for tracking attitude and position of underwater robots. Underwater work with underwater robots is subject to differences in work efficiency depending on the skill of the operator and the utilization of additional sensors. Therefore, this study developed an underwater robot that can operate autonomously and maintain a certain attitude when working underwater to reduce difference of work efficiency. The developed underwater robot uses 8 thrusters to control 6 degrees of freedom motion, IMU (Inertial Measurement Unit), DVL (Doppler Velocity Log) and PS (Pressure Sensor) to measure attitude and position. In addition, the thruster allocation algorithm was designed to follow the control desired value using 8 thrusters, and the motion control experiments were performed in the engineering water basin using the thruster allocation method.

무궁화 방송통신 위성의 3축 자세 안정화 장치에 관한 연구 (A study on the 3-axis attitude stabilization of Koreasat)

  • 진익민;백명진;김진철
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국내학술편); Seoul National University, Seoul; 20-22 Oct. 1993
    • /
    • pp.793-798
    • /
    • 1993
  • In this study the attitude control of the KOREASAT is investigated. The KOREASAT is a geostationary satellite and its 3 attitude angles, namely, roll, pitch and yaw angles, are stabilized by using the 3-axis stabilization technique. In the pitch control loop, the pitch attitude angle received from the earth sensor is processed in the attitude processing electronics by using PI type control logic, and the control command is sent to the momentum wheel assembly to generate the control torque by varying the wheel rate. The roll/yaw attitude control is performed by activating a magnetic torquer or by firing appropriate thrusters. The magnetic torquer interacts with the earth magnetic field to produce the control torque, and the thrusters are used to control the larger roll attitude errors. In this study dynamic modelling of the satellite is performed. And the earth sensor, the momentum wheel, and the magnetic torquer are mathematically modelled. The 3-axis attitude control logic is implemented to make the closed-loop system and simulations are carried out to verify the implemented control laws.

  • PDF

발사체 자세제어를 위한 100, 250 N 급 상용 과산화수소 단일추진제 추력기 개발 (Development of 100, 250 N Commercial $H_2O_2$ Monopropellant Thruster for Space Launch Vehicles)

  • 안성용;김종학;윤호성;권세진
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2009년도 제33회 추계학술대회논문집
    • /
    • pp.19-22
    • /
    • 2009
  • 발사체 상단의 자세제어를 목적으로 하는 과산화수소 단일추진제 추력기 설계 및 성능평가를 수행하였다. 상용 발사체급에 요구되는 수준인 100, 250 N 급 추력기를 목표로 하였으며 검증 모델에서 성능시험을 통해 형상을 확정한 후, 최종 비행 모델을 밸브와 통합하여 개발하였다. 설계된 추력기는 특성속도, 추력, 비추력 및 펄스 응답성 측정을 통해 설계의 적절성을 검증하였다.

  • PDF

Mixed Control with Aerodynamic Fin and Side Thruster Applied to Air Defense Missile

  • Chanho Song;Kim, Yoon-Sik
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 2001년도 ICCAS
    • /
    • pp.148.4-148
    • /
    • 2001
  • This paper shows an autopilot design example with simulation results for a medium range surface-to-air missile used to intercept fast maneuver targets. The missile is assumed to use both aerodynamic fins and side thrusters to achieve fast time response. The steady-state maneuver capability of the missile is assumed to be enough at high altitude to engage usual maneuvering targets. Side thruster is used to get an extremely rapid acceleration response at high altitude where the missile´s aerodynamic control effectiveness is weak. The strategy of control design is firstly to employ side thrusters to achieve a rapid response and then to hand-over the control to the aerodynamic fins to maintain the desired acceleration command in the steady state ...

  • PDF