• Earthquakes and Structures
• /
• 제14권3호
• /
• pp.241-248
• /
• 2018

To study the mechanical properties of joints in ancient timber buildings in depth, the force mechanism of the through-tenon joints was analyzed, also the theoretical formulas of the moment-rotation angles of the joints with different loosening degrees were deduced. To validate the rationality of the theoretical calculation formulas, six joint models with 1/3.2 scale ratio, including one intact joint and five loosening joints, were fabricated and tested under cyclic loading. The specimens underwent the elastic stage, the plastic stage and the destructive stage, respectively. At the same time, the moment-rotation backbone curves of the tenon joints with different looseness were obtained, and the theoretical calculation results were validated when compared with the experimental results. The results show that the rotational moment and the initial rotational stiffness of the tenon joints increase gradually with the increase of the friction coefficient. The increase of the tenon section height can effectively improve the bearing capacity of the through-tenon joints. As the friction coefficient of the wood and the insertion length of the tension increase, the embedment length goes up, whereas it decreases with the increase of section height. With the increase of the looseness, the bearing capacity of the joint is reduced gradually.

• 건축역사연구
• /
• 제16권1호
• /
• pp.83-99
• /
• 2007

This study examines the joint and splice of wooden structure at Geunjeongjeon Hall of Gyengbok Palace, which was constructed in the late Joseon Dynasty. The scope of the study is on the part of columns, the bracket sets, and the frame structure. This research also deals with the relationship between vortical load and horizontal load. Firstly, the examination of the joint and splice methods between the pillar and penetrating ties is on the joint and splice methods of the outer and corner. Through the investigation, it is verified that the joint methods between pillar and penetrating tie on the outer and corner pillars is the method of Sagal joints(cross joints, 사개맞춤). Joints used between pillar and penetrating tie are dovetailed tenon joints, between columns and Anchogong(안초공), between columns and Choikgong(초익공) are tenon joint(장부맞춤). Secondly, the examination of the joint and splice methods of the bracket set is on that of Salmi and Cheomcha(첨차), and Salmi and Janghyeo(장혀). Joints used between Salmi and Cheomcha, Salmi and Janghyeo are halved joint, and between each Janghyeo are stepped dovetailed splice. It is Cheomcha that is used the Jujang-Cheomcha(주장첨차) on center line. Therefore it is connected with each bracket set, which gets to is the strong system, easy and convenient on the construction of that. Thirdly, the frame structure of wooden architecture in royal palace is consist of purlins and beams, Janghyeo(장혀, timber under purlin), tall columns, king posts, etc. Through the investigation, it is verified that the joint and splice methods between purlins and beams are used with the methods of Sungeoteok joint(숭어턱맞춤). It is verified that the joint and splice methods between beams and high columns are used with methods of mortise and tenon joint(장부맞춤), is highly related with tensile force. To reduce the separation of parts, sangi(산지) and tishoi(띠쇠) are used as a counterproposal, which were generally used for architecture in royal Palaces in the late Joseon Dynasty and continued to be used until these days common wooden architecture.

• 한국구조물진단유지관리공학회 논문집
• /
• 제16권2호
• /
• pp.104-112
• /
• 2012

전통 목구조는 기둥-보-도리로 가구를 구성하며, 보 장부의 파괴는 전통 목구조의 붕괴로 이어질 수 있다. 장부의 구조성능을 평가하기 위해 장부 두께에 따른 내력과 강성을 평가하고, 상부 구조체를 해체하여야 가능한 기존 보강방안을 보완하여 상부 구조체를 해체하지 않고 보강하는 방안을 제안한다. 효과적인 보강방안을 제안하기 위해 철물 개수 및 간격, 모양 및 삽입깊이를 요인으로 실험을 행하여 비보강 실험체와 내력, 강성을 비교한다. 장부의 전단실험을 통하여 다음과 같은 결론을 도출한다. 장부의 내력과 초기전단강성은 장부 두께가 두꺼워질수록 증가하지만, 장부 두께를 크게 하면 기둥의 사개부분이 약해져 구조적 안전성에 영향을 미친다. 장부의 내력 전단응력 전단강성을 효과적으로 향상시키기 위해서는 철물 3개를 장부의 중앙부에 배치하여 보강하여야 한다. 이를 토대로 기둥-보-도리 등의 접합부에 대한 연구도 진행되어야 할 것이다.

• Journal of the Korean Wood Science and Technology
• /
• 제38권3호
• /
• pp.199-204
• /
• 2010

전통공법에서는 주로 소나무를 수가공하여 구조부재로 사용하고 있다. 주먹장 접합(이음, 맞춤)은 일반 가구나 구조부재의 접합에 사용되고 있으며, 수가공이나 간단한 기계가공에 의해 쉽게 가공할 수 있는 이점이 있다. 비록 외관상 선형적인 가공이 주를 이루지만, 손쉬운 짜맞춤이 될 수 있어야 하는 고도의 가공정밀성이 요구된다. 더욱이, 장부와 장부받이는 틈새없는 긴결한 접합이 이루어져야 한다. 주먹장접합부에 대한 과학적인 연구는 체계적으로 수행된 예가 많지 않으므로 전통공법과 국산재 활용이라는 관점에서 낙엽송집성재를 기계가공하여 이용하였다. 통주먹장이음 접합부의 인장성능을 파악하기 위하여 150 mm 정각 낙엽송 집성재를 사용하였으며, 내력성능에 영향을 끼치는 주먹장의 다양한 기하학적 요소(장부 너비, 길이, 각도)에 대해 조사하였다. 보강목을 설치하지 않은 시험편은 장부받이(장부홈)의 모서리부에서 할렬이 발생하며 내력도 낮게 나타났다. 기둥머리의 화통맞춤 및 주두와 같은 상황을 고려한 보강시험편은 최대인장내력에서 2배 이상의 성능을 발휘하였다. 장부의 적정각도는 25도 수준이었으며, 어깨폭의 변화와는 상관성이 없는 것으로 나타났다.

• 한국가구학회지
• /
• 제26권4호
• /
• pp.409-420
• /
• 2015

This study intends to explore a teaching philosophy of a Master, a joiner, a cabinet maker, Byeung-Soo Kim who has devoted his entire life on creating and making traditional Korean wood furniture since the elementary school. His teaching method is to make his learners skillful by learning how to make traditional Korean furniture with the traditional technique or joint handmade. They are able to create the furniture in passing through some levels such as a beginning, a middle, a high, and a special class for three years. Each level suggests that the students should study its own joints from laminating, dado, butt, dovetail, mitered, mortise-and-tenon, rabbet, tongue-and-groove and so on. The teaching method is very unique as the technique different and difficult to fine it from other education processes throughout the country.

• 건축역사연구
• /
• 제21권3호
• /
• pp.73-92
• /
• 2012

This study mainly inquired characteristics and changes of 'Chang-aelgool' through 38 cases(with 161 Ssang-chang) of annex and pavillion buildings in Yeong-nam region which are built during the Chosun dynasty. The method of inquiry included actual survey of windows along with bibliographical research, and the results are as below. First, through the discovery of the term 'Chang-aelgool' as an indication of the window-forming frame in 'YeongGeonUiGwe'(1680 A.D), it is apparent that the term 'Chang-aelgool' was widely used in Korea from the late 17th century. Second, the 'Chang-aelgool' of study objects are classified into 4 categories. Type I and II are comprised of mitre-joints which cover the 4 corners of 'Chang-aelgool' and mainly used in building annex and pavillion buildings during the early period of the Chosun dynasty. Type III was widely used during the early and middle period of the Chosun dynasty and drastically dropped in number during the late period of the dynasty. Type IV is comprised of mitre-joint of the upper-half, tenon-jointing of the lower-half and widely used in annex and pavillion building during the late period of the Chosun dynasty. Third, the form of 'Chang-aelgool' has changed from rectangular form with longer width during the early period of Chosun dynasty to square form during the middle period and eventually ended up as a rectangular form with longer height during the late period of the dynasty. Fourth, it is considered that while mullion which is located in the center of 'Chang-aelgool' was mainly used around the main floored room during the early period of the Chosun dynasty, became commonly used in main floored room and 'ondol' rooms during the middle period and drastically dropped in number from then and ended up being not in use after the mid 18th century.