• Journal of the Korea Society of Computer and Information
• /
• v.16 no.12
• /
• pp.175-185
• /
• 2011

The threshold level of a receiver is analyzed for the simplification of system and the improvement of upstream data ratios in optical subscriber network of which the upstream date rate and the optical transmitted power are changed to meet the requested BER (Bit Error Rate) defined per interactive multimedia services. In asynchronous optical subscriber network of which the upstream to downstream data ratios are 1:1/2, 1:1/4, 1:1/8 and 1:1/16 with manchester coded downstream and NRZ (Non Return to Zero) downstream re-modulation, the BER performance is theoretically analyzed and it is performed by simulation with MATLAB according to the four types of downstream data for four models. The results have shown that in the cases which the upstream to downstream data ratios are 1:1/4, 1:1/8 and 1:1/16 the conventional receiver with threshold level of 1/2 can be applied regardless of average received optical powers and the BER is not much deteriorated compared with using the optimal threshold level. In the case that the upstream to downstream data ratio is 1:1/2 the threshold level in an optical receiver could be fixed at 1/3 and the BER is not much deteriorated compared with using the optimal threshold level as the average received optical power increases.

• Korean Journal of Optics and Photonics
• /
• v.9 no.3
• /
• pp.205-211
• /
• 1998

The MTF(modulation transfer function) measuring system with a linear CCD(charge coupled-device) was constructed to cvaluate a color CRT(catode ray tube). The measured MTF values were corrected by considering the spectral response and the pixel sizes of CCD. The effects of a spot size, video bandwidth, pitch of shadow mask holes, display luminance, and ambient illumination on image quality were studied. The uniformity of resolution and the contrast Ioss by ambient light of the color CRT monitor were measured, and the results were analyzed by MTFA(modulation threshold area).

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.4B
• /
• pp.270-277
• /
• 2006

In the wireless adaptive modulation and coding(AMC) systems, the modulation type of user's connection can be changed dynamically. and the ongoing connection might fail due to the change of modulation. In this paper, we approach the AMC-induced CAC problem by focusing on the guaranteed connection. Three kinds of calls, new, handoff, and modulation-changed calls, are considered. We propose a modified guard channel CAC scheme that allows the modulation-changed and handoff calls to use the guard channel. Then we analyze a Markov model for the CAC scheme with long-term AMC in mind. According to the simulation results, the proposed approach reduces the call dropping probability for modulation-changed calls, which suggests the threshold of guard channels can be determined based on the proposed approach.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.7C
• /
• pp.907-914
• /
• 2004

In this paper, we propose an application of the receiver antenna switching to an conventional adaptive modulation system and derived the optimal antenna switching threshold of the system to maximize the average transmission bit rate and analyzed its performance. Also, we compare the performances of the presented scheme with those of an adaptive modulation using the antenna selection diversity and the one with a single antenna in terms of the average number of bits per symbol and the probability of no transmission. Performance comparison results show that the proposed system has an SNR gain of 1.4 dB over the adaptive modulation using a single antenna when the average number of bits per a symbol is two and yields an SNR gain of 6 dB for maintaining the probability of no transmission at the level of 0.1.

• Korean Journal of Optics and Photonics
• /
• v.6 no.3
• /
• pp.228-232
• /
• 1995

We have made modulation doped SMQW-PBH-DFB-LD for high speed optical communications. The waveguide and barrier layers were doped by Zn with the concentration of $1.2 \times 10^{18}cm^{-1}$. Mean threshold current and slope efficiency were 24.88 mA (minimum 16 mA) and 0.197 mW/mA (maximum 0.275 mW/mA) respectively. Linewidth enhancement factor ($\alpha$) of MD-SMQW-PBH-DFB-LD was reduced than that of SMQW-PBH-DFB-LD. Linewidth enhancement factor of 1.8 owes to the large gain coefficient of modulation doped active layer. The resonance frequency was linearly increased with the square root of optical power. The resonance frequency in small signal modulation was measured as 8 GHz and -3 dB modulation bandwidth was 10 GHzat $46mA(I_{th}+30mA)$..

• Proceedings of the IEEK Conference
• /
• 2002.07c
• /
• pp.1440-1443
• /
• 2002

In this paper, we investigate the throughput improvement of an adaptive M-ary quadrature modulation (AMQAM) scheme by using new switching thresh-olds over slow frequency nonselective Nakagami-m fading channels. The new switching thresholds are obtained by using the approximated BER expressions with complimentary error functions for each modulation scheme given in AWGN channels. By using the new switching thresholds, we can improve the maximum system throughput. For example, we get the maximum throughput improvement about 0.32 when tile target BER is 10$\^$-3/ and the fading figure m = 3.

• Journal of Electrical Engineering and Technology
• /
• v.6 no.4
• /
• pp.539-542
• /
• 2011

Thin-film transistors (TFTs) are fabricated using an amorphous indium gallium zinc oxide (a-IGZO) channel layer by rf-magnetron sputtering. Oxygen partial pressure significantly changed the transfer characteristics of a-IGZO TFTs. Measurements performed on a-IGZO TFT show the change of threshold voltage in the transistor channel layer and electrical properties with varying $O_2$ ratios. The device performance is significantly affected by adjusting the $O_2$ ratio. This ratio is closely related with the modulation generation by reducing the localized trapping carriers and defect centers at the interface or in the channel layer.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.24 no.5
• /
• pp.733-739
• /
• 1987

In this paper, variable threshold detection with weighted pulse code modulation-encoded signals transmitted over Gaussian channels has been investigated. Each bit in the \ulcornerlaw PCM word is weighted according to its significance in the transmitter. It the output falls into the erasure zone, the regenerated sample replaced by interpolation or prediction. To overall system signal to noise ratio for BPSK/PCM speech signals of this technique has been found. When the input signal level was -17 db, the gains in overall signal s/n compared to weighted PCM and variable threshold detection were 5 db and 3 db, respectively. Computer simulation was performed generating signals by computer. The simulation was in resonable agreement with our theoretical prediction.

• Journal of IKEEE
• /
• v.14 no.3
• /
• pp.250-255
• /
• 2010

The interleaved power management IC(PMIC) with DTMOS(Dynamic Threshold voltage MOSFET) switching device is proposed in this paper. The buck-boost converter used to provide the high output voltage and low output voltage for portable applications. Also we used the PWM(Pulse Width Modulation) control method for high power efficiency at high current level. DTMOS with low on-resistance is designed to decrease conduction loss. The interleaved PMIC to reduce output ripple. And step-down DC-DC converter in stand-by mode below 1mA is designed with LDO in order to achive high efficiency.

• Journal of the Korea Society of Computer and Information
• /
• v.15 no.3
• /
• pp.65-72
• /
• 2010

We propose the asymmetric 2.5Gbps/622Mbps PON(Passive Optical Network) in order to reduce the bandwith of filter at receiver with inverse RZ(Return to Zero) code coded downstream and NRZ(Non Return to Zero) upstream re-modulation. I theoretically analyze BER(Bit Error Rate) performance and the power sensitivity with the optimal threshold level by performing simulation with MATLAB according to the types of downstream data. The results have shown that the optimal threshold level at the optical receiver could be saturated at 0.33 as the optical received power increase more than -26dBm to keep $10^{-12}$ of BER to a minimum. Also the power sensitivity is more improved by about 3dB by fixing the threshold level at 0.33 than the conventional receiver. The proposed system can be a useful technology for optical access networks with asymmetric upstream and downstream data rates because the optical receiver can be used without controlling threshold levels and that does not require a light source in optical network unit (ONU) and its control circuits in the optical line termination (OLT).