• 한국해안해양공학회지
• /
• 제15권4호
• /
• pp.232-241
• /
• 2003

3차원 선형포텐셜 이론아래에서 해저면 바닥에 고정된 N개의 투과성 원기둥과 입사파의 상호작용 문제를 살펴보았다. 유체영역을 때의 외부영역과 N개의 내부영역으로 나누고, 각 유체영역에서의 회절포텐셜을 고유함수전개법에 의해 표현하였다(Williams and Li, 2000). 투과성 구조물은 파력과 처올림 파형을 크게 줄일 수 있다는 사실을 해석결과는 보여주고 있다. 개발된 해석모델을 검증하기 위하여 일렬로 배열한 투과성 원기둥들을 가지고 조파수조(30m $\times$ 7m $\times$ 1.5m)에서 체계적인 모형실험을 수행하였다. 해석결과와 모형실험결과는 정성적으로 잘 일치하고 있음을 확인하였다. 투과성 원기둥을 일렬로 배열하여 만든 방파제는 해수교환뿐 아니라 우수한 소파성능을 가지고 있어 미래의 해수교환방파제로써 무한한 잠재력이 있다고 판단된다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2005년도 제25회 추계학술대회논문집
• /
• pp.117-120
• /
• 2005

본 연구에서는 초음속 공동 주위에서 발생하는 비정상 유동현상을 이해하고, 공동시스템이 설치된 장치의 성능 및 안정적인 운전을 방해할 수 있는 공동유동의 압력진동을 제어할 수 있는 방법을 제시한다. 사각형의 공동을 지나는 초음속 유동장은 3차원 비정상 압축성 Wavier-Stokes 방정식에 완전 내제적 유한체적법 및 large eddy simulation을 적용하여 수치모사하였다. 수치계산은 공동전단 근처에 설치된 삼각돌기나 블로잉 제트가 초음속 공동유동장의 유동특성에 미치는 영향을 조사하였다. 본 수치계산 결과로부터 이러한 제어방법들이 특히 공동후단 부근에서 발생하는 강한 압력진동을 억제하는데 효과가 있음을 알 수 있다.

• Smart Structures and Systems
• /
• 제24권3호
• /
• pp.403-414
• /
• 2019

Offshore drilling has become a key process for obtaining oil. Offshore platforms have many applications, including oil exploration and production, navigation, ship loading and unloading, and bridge and causeway support. However, vibration problems caused by severe environmental loads, such as ice, wave, wind, and seismic loads, threaten the functionality of platform facilities and the comfort of workers. These concerns may result in piping failures, unsatisfactory equipment reliability, and safety concerns. Therefore, the vibration control of offshore platforms is essential for assuring structural safety, equipment functionality, and human comfort. In this study, an optimal multiple tuned mass damper (MTMD) system was proposed to mitigate the excessive vibration of a three-dimensional offshore platform under ice and earthquake loadings. The MTMD system was designed to control the first few dominant coupled modes. The optimal placement and system parameters of the MTMD are determined based on controlled modal properties. Numerical simulation results show that the proposed MTMD system can effectively reduce the displacement and acceleration responses of the offshore platform, thus improving safety and serviceability. Moreover, this study proposes an optimal design procedure for the MTMD system to determine the optimal location, moving direction, and system parameters of each unit of the tuned mass damper.

• Wind and Structures
• /
• 제23권2호
• /
• pp.127-142
• /
• 2016

Aerodynamic effects, such as drag force and flow-induced vibration (FIV), on civil engineering structures can be minimized by optimally modifying the structure shape. This work investigates the turbulent wake of a square prism with its faces modified into a sinusoidal wave along the spanwise direction using three-dimensional large eddy simulation (LES) and particle image velocimetry (PIV) techniques at Reynolds number $Re_{Dm}$ = 16,500-22,000, based on the nominal width ($D_m$) of the prism and free-stream velocity ($U_{\infty}$). Two arrangements are considered: (i) the top and bottom faces of the prism are shaped into the sinusoidal waves (termed as WSP-A), and (ii) the front and rear faces are modified into the sinusoidal waves (WSP-B). The sinusoidal waves have a wavelength of $6D_m$ and an amplitude of $0.15D_m$. It has been found that the wavy faces lead to more three-dimensional free shear layers in the near wake than the flat faces (smooth square prism). As a result, the roll-up of shear layers is postponed. Furthermore, the near-wake vortical structures exhibit dominant periodic variations along the spanwise direction; the minimum (i.e., saddle) and maximum (i.e., node) cross-sections of the modified prisms have narrow and wide wakes, respectively. The wake recirculation bubble of the modified prism is wider and longer, compared with its smooth counterpart, thus resulting in a significant drag reduction and fluctuating lift suppression (up to 8.7% and 78.2%, respectively, for the case of WSP-A). Multiple dominant frequencies of vortex shedding, which are distinct from that of the smooth prism, are detected in the near wake of the wavy prisms. The present study may shed light on the understanding of the underlying physical mechanisms of FIV control, in terms of passive modification of the bluff-body shape.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1998년도 제13차 학술회의논문집
• /
• pp.70-74
• /
• 1998

This paper describes a method for recognition of two-dimensional position of an object by use of aerial ultra-sonic sensor and signal processing technique, which would become a help for blind person or self-mobile robot. First, we have developed a method for measuring the time difference between the transmitted and the received burst wave by use of one ultrasonic transmitter and three receivers. Secondly, a new method is developed for measuring the distance to an object by use of M-sequence correlation method. Thirdly, a measurement method to obtain the position of an object is described by use of phase-arrayed ultrasonic sensor, which gives us a wide-range position determination in a short time.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2007년도 제28회 춘계학술대회논문집
• /
• pp.295-298
• /
• 2007

본 연구에서는 초음속 공동유동장에서 발생하는 압력변동을 저감하기 위한 피동제어방법의 유용성을 실험 및 수치해석적으로 조사하였다. 피동제어방법으로 사각 공동내 상류 벽면에 sub-cavity를 설치하였다. 공동내 하류벽면에 센서를 설치하여 압력변동 값을 실험적으로 측정하였으며, 측정된 압력변동값을 FFT변환하여 주파수 분석을 하였다. 수치계적으로는 공동내 압력변동 특성을 살펴보기 위해 3차원 비정상 Navier-Stokes 방정식에 유한체적법을 적용하여 유동장을 모사하였으며, 유동의 난류상태량들은 LES 방법을 사용하여 계산하였다. 본 연구에서 얻어진 결과는 다음과 같다. 공동유동에서 진동 특성은 공동 하류벽면에서 발생하는 압력진동에 의존한다. 특히 leading tip 두께와 sub-cavity 크기가 진동 저감효과에 주요 인자이다.

• 화약ㆍ발파
• /
• 제39권2호
• /
• pp.1-14
• /
• 2021

최근에는 GPGPU(General-Purpose computing on Graphics Processing Units)와 같은 고성능 연산장치의 보급과 함께 국방, 우주항공분야에서 암질재료에 대한 충격실험을 대신할 수 있는 3차원 동적해석기법의 개발이 활발하게 진행되고 있다. 그러나 높은 충격하중을 수반하는 암 발파 또는 소형미사일 등의 지중 관통과 같은 과정을 실험적으로 관찰하거나 계측하는 것은 암질재료의 비 균질성 및 불투명성 때문에 어려움이 있었다. 본 연구에서는 고속충돌에 의한 암석의 파괴 거동을 모사하기 위하여 3차원 동적 파괴 과정 해석 기법 (3D-DFPA)를 개발하였으며, 연산속도를 향상시키기 위하여 순차해석(explicity analysis) 및 접촉요소검색(Searching algolitm of contact elements)에 GPGPU연산이 가능한 알고리듬을 적용하였다. 제안된 동적파괴과정해석 기법에 대한 검증을 위해 Straight Notched Disk Bending (SNDB) 석회암시료에 대한 동적파괴인성시험을 모사하였고, 충격응력파의 전파과정, 암석-충격봉 경계면에서 반사 및 전달과정, 암석 시료의 파괴과정을 비교분석하여, 개발된 해석기법에 대한 검증을 수행하였다.

• ETRI Journal
• /
• 제40권1호
• /
• pp.39-50
• /
• 2018

More people prefer using rail traffic for travel or for commuting owing to its convenience and flexibility. The railway scenario has become an important communication scenario in the fifth generation era. The communication system should be designed to support high-data-rate demands with seamless connectivity at a high mobility. In this paper, the channel characteristics are studied and modeled for the railway tunnel scenario with straight and curved route shapes. On the basis of measurements using the "Mobile Hotspot Network" system, a three-dimensional ray tracer (RT) is calibrated and validated for the target scenarios. More channel characteristics are explored via RT simulations at 25.25 GHz with a 500-MHz bandwidth. The key channel parameters are extracted, provided, and incorporated into a 3rd-Generation-Partnership-Project-like stochastic channel generator. The necessary channel information can be practically realized, which can support the link-level and system-level design of the communication system in similar scenarios.

• International Journal of Aeronautical and Space Sciences
• /
• 제17권3호
• /
• pp.324-331
• /
• 2016

The present study focuses on the characteristics of a supersonic jet flowing from a rectangular nozzle exit on a flat plate. Flow visualization techniques using schlieren and kerosene-lampblack tracing are utilized to investigate shock reflection structures and boundary-layer separations over a flat plate. Wall pressure measurements are also carried out to quantitatively analyze the flow structures. All observations are repeated for multiple jet flow boundary conditions by varying the flap length and nozzle pressure ratio. The experimental results show that the jet flow structures over the flat plate are highly three-dimensional with strong bleeding flows from the plate sides, and that they are sensitive to plate length and nozzle pressure ratio. A multi-component force measurement device is also utilized to observe the characteristics of the jet flow thrust vectoring over the plate. The maximum thrust deflection angle of the jet is about $8^{\circ}$, demonstrating the applicability of thrust vector control via a flat plate installed at the nozzle exit.

• 대한의용생체공학회:의공학회지
• /
• 제14권2호
• /
• pp.125-136
• /
• 1993

The study of Cochlear biomechanics is to clearly define three biomechanical principles of the Cochlea : Activity, Nonlinearity and Feedback. In this article, the Cochlea is linearly and actively modelled in one dimensional time domain. The sharp tunning of the Basilar Membrane displacement is shown when the amplifying activity of hair cells is added to the model. The amplified energy of the travelling displacement wave is emitted throughout the Cochlear fluid, so that the model becomes unstable. A new technique is introduced to reduce strong echos fro the Helicotrema. It makes the model less unstable. Both pure and click tones are used as input stimuli onto the ear durm. When the model is normal, the click response of the model shows that the backward emission of the amplified fluid pressure has mainly the echos from the Helicotrema. However, when the linear and active model is assumed to be abnormal, that is, some of hair cells are damaged not to produce the active process, the effect of the hair cell damage is resulted in the Oto-acoustic emission. The frequency response of the abnormally emitted sound pressure shows that the Oto-acoustic emission has the information about the characteristic frequency of the damaged hair cell. The main aim of this paper is to demonstrate the active biomechanics of the Chchlea in the time domain.