• 국제지역연구
• /
• 제22권2호
• /
• pp.81-110
• /
• 2018

본 논문에서는 삼차원게임이론의 논리 구조를 통해 지역경제통합체, 즉 유럽연합의 통상 협상 전략 및 협상력을 분석하였다. 삼차원게임이론에서는 협상자가 각 면 게임의 경계에 서서 게임을 동시에 운용해 나아가면서, 각 방향으로부터 제약을 받거나 때때로 제약을 기회로 활용하는 등 삼중 측면의 협상 전략이 상존함을 강조하였다. 삼차원게임이론에 대한 연구는 지역연합이 협상의 주체로서 등장하여 국제레벨, 지역레벨 및 회원국레벨의 의견을 조율하고, 이해관계를 조정하는 과정을 체계화하기 위한 목적을 가진다. 본 연구에서는 최근 체결된 EU-일본 EPA(Economic Partnership Agreement) 협상과정을 사례로 한-EU FTA 사례와 비교 분석하여, 지역경제협력체의 FTA 추진 시 적용할 수 있는 삼차원게임이론의 논리를 정리하였다. 또한 본고에서는 지역경제통합체의 통상협상 대상국은 협상에 임할 때 어떠한 전략에 대응할 수 있을 것인가에 관해 분석하였다. EU 지역차원의 통상정책 영역은 기술적 특성으로 정치화되기 어려운 영역에 관한 연합의 배타적 권한화가 이미 완성되었으며, 연합 차원의 정책과정이 정치쟁점으로 드러나지 않아왔던 점 그리고 여론 전달 과정이 더블 스텝 접근 방식인 점 등이 복합되어 그 특성을 형성해 왔다. 결론적으로 EU의 통상영역 정책 과정은 다양한 중앙조직에 의한 권한 배분으로 복잡하고 정교한 과정을 구성한다. 이러한 공동정책 결정과정과 통상 영역의 구조적 특성으로 말미암아 오히려 협상의 메커니즘 역설적으로 단순화되었고, 공동체 차원의 협상력은 높아졌다. 결과적으로 유럽위원회는 국제레벨 단계의 양자간 통상협상에서 매우 강력한 협상 행위자로 기능하게 된다.

• Journal of Korean Dental Science
• /
• 제15권1호
• /
• pp.19-30
• /
• 2022

Purpose: The purpose of the study was to assess the validity of three-dimensional (3D) facial scan taken with facial scanner and digital photo wrapping on the cone-beam computed tomography (CBCT). Materials and Methods: Twenty-five patients had their CBCT scan, two-dimensional (2D) standardized frontal photographs and 3D facial scan obtained on the same day. The facial scans were taken with a facial scanner in an upright position. The 2D standardized frontal photographs were taken at a fixed distance from patients using a camera fixed to a cephalometric apparatus. The 2D integrated facial models were created using digital photo wrapping of frontal photographs on the corresponding CBCT images. The 3D integrated facial models were created using the integration process of 3D facial scans on the CBCT images. On the integrated facial models, sixteen soft tissue landmarks were identified, and the vertical, horizontal, oblique and angular distances between soft tissue landmarks were compared among the 2D facial models and 3D facial models, and CBCT images. Result: The results showed no significant differences of linear and angular measurements among CBCT images, 2D and 3D facial models except for Se-Sn vertical linear measurement which showed significant difference for the 3D facial models. The Bland-Altman plots showed that all measurements were within the limit of agreement. For 3D facial model, all Bland-Altman plots showed that systematic bias was less than 2.0 mm and 2.0° except for Se-Sn linear vertical measurement. For 2D facial model, the Bland-Altman plots of 6 out of 11 of the angular measurements showed systematic bias of more than 2.0°. Conclusion: The facial scan taken with facial scanner showed a clinically acceptable performance. The digital 2D photo wrapping has limitations in clinical use compared to 3D facial scans.

• 대한기계학회논문집A
• /
• 제24권6호
• /
• pp.1499-1512
• /
• 2000

The dynamic explicit finite element method and the static implicit finite element method are applied effectively to analyze total auto-body panel stamping processes, which include the forming stage , the trimming stage and the spring-back stage.\The explicit time integration method has better merits in the forming stage including highly complicated three-dimensional contact conditions. On the contrary, the implicit time integration method is better for analyzing spring-back since the complicated contact conditions are removed and the computing time to get the final static state is short. In this work, brief descriptions of the formulation and the factor study are presented. Further, the simulated results for the total auto-body panel stamping processes are shown and discussed. The formability and the weld line movement in stamping with Tailor Welded Blanks were investigated through QTR-OTR-FRT.

• 한국게임학회 논문지
• /
• 제17권1호
• /
• pp.89-98
• /
• 2017

본 논문에서는 물리기반 동적 변형을 실시간에 안정적으로 시뮬레이션하는 새로운 ARAP(as-rigid-as-possible) 방법을 제안한다. 1, 2, 3차원 물체의 변형을 안정적이며, 빠르고, 일관성 있게 다루기 위하여 방향성 입자로 이루어진 변형 그래프를 도입하고 그에 따른 ARAP 변형에너지를 공식화한다. 방향성 입자의 안정적인 시간 적분을 위해서는 변분 공식화에 기반을 둔 내재적 시간 적분 기법을 개발한다. 또한 국지적/전역적 최적화를 교대로 반복 적용하여 방향성 입자의 최적 위치 및 회전을 구한다. 제안된 방법은 구현이 쉽고 복잡한 변형을 실시간에 시뮬레이션할 수 있을 정도로 빠르다.

• 교육시설 논문지
• /
• 제21권2호
• /
• pp.25-32
• /
• 2014

Many Korean university campuses are located on hilly terrain where the hierarchy of the path system is unclear. Therefore, it is difficult to analyze the pedestrian network through space syntax, in which only horizontal direction changes are considered as depths of space. The purpose of this study is to compare pedestrian movement patterns and space syntax analysis in order to find their relevance to each other and the relationship between them. We conducted a survey regarding the most-visited buildings and pathways at S-University, which is located on a hilly area in Seoul. The survey results were compared with the Space Syntax integration map by regression analysis. For the segments where the relationship between pedestrian volume and integration was weak, field observations were conducted. As a result, topographical aspects, functional aspects, and location aspects were observed as the main influential factors. In addition, the research proposes that adding an extra axial line per vertical directional change can potentially compensate for the low relevance of stairs. This study suggests the possibility and the necessity of three-dimensional space syntax programs and emphasizes the importance of campus planning for the pedestrian environment.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2002년도 추계학술대회 논문집
• /
• pp.158-163
• /
• 2002

This paper presents a multiple sensor system for rapid and high-precision coordinate data acquisition in the OMM (On-machine measurement) process. In this research, three sensors (touch probe, laser, and vision sensor) are integrated to obtain more accurate measuring results. The touch-type probe has high accuracy, but is time-consuming. Vision sensor can acquire many point data rapidly over a spatial range but its accuracy is less than other sensors. Also, it is not possible to acquire data for invisible areas. Laser sensor has medium accuracy and measuring speed among the sensors, and can acquire data for sharp or rounded edge and the features with very small holes and/or grooves. However, it has range- constraints to use because of its system structure. In this research, a new optimum sensor integration method for OMM is proposed by integrating the multiple-sensor to accomplish mote effective inspection planning. To verify the effectiveness of the proposed method, simulation and experimental works are performed, and the results are analyzed.

• 한국측량학회지
• /
• 제38권5호
• /
• pp.425-433
• /
• 2020

Three-dimensional data has been used for different applications such as robotics, building reconstruction, and so on. 3D data can be generated from an optical camera or a laser scanner. Especially, a wearable multi-sensor system including the above-mentioned sensors is an optimized structure that can overcome the drawbacks of each sensor. After finding the geometric relationships between sensors, georeferencing of the datasets acquired from the moving system, should be carried out. Especially, in an indoor environment, error propagation always causes problem in the georeferencing process. To improve the accuracy of this process, other sources of data were used to combine with LiDAR (Light Detection and Ranging) data, and various registration methods were also tested to find the most suitable way. More specifically, this paper proposed a new process of NDT (Normal Distribution Transform) to register the LiDAR point cloud, with additional information from other sensors. For real experiment, a wearable mapping system was used to acquire datasets in an indoor environment. The results showed that applying the new process of NDT and combining LiDAR data with IMU (Inertial Measurement Unit) information achieved the best result with the RMSE 0.063 m.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 D
• /
• pp.1984-1986
• /
• 2001

In order to provided continuous solutions, latest developing navigation systems tend to integrate GPS receiver with INS or DR. Using the GPS carrier-phase measurements, an attitude GPS receiver with three antennas obtain the 3-dimensional attitude such as roll, pitch, and heading as well as position and velocity. With these angle measurements, in the attitude GPS/INS integrated system, attitude or gyro errors can be directly compensated. In this paper, we develop an integrated navigation system that combines attitude GPS receiver with INS. The performance of real-time integrated navigation system is determined by not only the implements of integration filter but also the synchronization of measurements. To meet these real-time requirements, the navigation software is implemented in multi-tasking structure in this paper. We also employ time-synchronization technique in the multi-sensor fusion. Experimental results show that the performance of the attitude GPS/INS integrated system is consistent even when cycle-slip occurs in carrier-phase measurements.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제34권5호
• /
• pp.555-561
• /
• 2008

Purpose: The goal of this study was to develop a technique for creating a computerized composite maxillofacial-dental model, based on point-based surface best fit algorithm and to test its accuracy. The computerized composite maxillofacial-dental model was made by the three dimensional combination of a 3-dimensional (3D) computed tomography (CT) bone model with digital dental model. Materials and Methods: This integration procedure mainly consists of following steps : 1) a reconstruction of a virtual skull and digital dental model from CT and laser scanned dental model ; 2) an incorporation of dental model into virtual maxillofacial-dental model by point-based surface best fit algorithm; 3) an assessment of the accuracy of incorporation. To test this system, CTs and dental models from 3 volunteers with cranio-maxillofacial deformities were obtained. And the registration accuracy was determined by the root mean squared distance between the corresponding reference points in a set of 2 images. Results and Conclusions: Fusion error for the maxillofacial 3D CT model with the digital dental model ranged between 0.1 and 0.3 mm with mean of 0.2 mm. The range of errors were similar to those reported elsewhere with the fiducial markers. So this study confirmed the feasibility and accuracy of combining digital dental model and 3D CT maxillofacial model. And this technique seemed to be easier for us that its clinical applicability can good in the field of digital cranio-maxillofacial surgery.

• 한국전산구조공학회논문집
• /
• 제24권5호
• /
• pp.531-542
• /
• 2011

본 논문에서는 3차원 유한요소법과 수치시간적분을 사용하여 교량 내 단면의 시간에 따른 온도분포를 결정하였다. 초기재령 구조물의 거동을 효과적으로 모사하기 위해 시간에 따라 변하는 재료특성과 온도분포에 따른 열응력을 고려하였다. 온도분포는 비선형이며 열전도율, 비열, 콘크리트의 수화열, 대류계수 등의 재료 상수들과 태양열에 영향을 받으므로 주요한 영향인자인 시공시의 계절, 풍속, 교량 상판포장에 대한 영향을 고려하였다. 본 논문의 해석결과와 이전의 다른 해석연구와 비교를 통해 제안된 수치모델의 타당성을 검증하였다. 네 개의 다른 교량 단면의 연구를 토대로 더 타당한 설계결과를 얻기 위해서는 콘크리트 교량에서의 크리프 변형이 고려되어야 된다는 점과 도로교설계기준에서 제시한 온도분포는 개선될 필요가 있다는 것을 알 수 있었다.