• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2003년도 추계학술발표회 논문집
• /
• pp.163-167
• /
• 2003

As digital photogrammetry can acquire much three-dimensional data quickly and exactly in equal accuracy, and it has advantage that can use this in modelling, it's practical use possibility is increased in various field by collection method of data for GIS. In this study, it was intended to create 3D image that has coordinate system, and use in acquisition of position information for object. And, it was applied to discontinuities extraction and measurement of rock slope for practical use of three-dimensional image and examination of measurement accuracy. Through this, it is inspected the possibility of three-dimensional image creation and the acquisition of space information.

• 전자공학회논문지S
• /
• 제35S권5호
• /
• pp.83-93
• /
• 1998

Three dimensional data acquisition system based on the structured light is developed in this work. The system is composed of a CCD camera, slide projector, and various image processing programs. Calibration procedures and several image processing steps which are necessary to get the rnage data are described. A new grid labeling technique and a grid pattern are devised to improve the accuracy of th eobtained data. Preliminary experimental result shows that the developed system may be used as a simple and cheap 3D data acquisition system. Severla suggestions are included for further research.

• 해양환경안전학회지
• /
• 제6권1호
• /
• pp.47-55
• /
• 2000

A three-dimensional digital image processing technique is proposed to quantitatively predict the dispersion phenomena of oil droplet onto the surface of the water. This technique is able to get the dispersion rate of an oil droplet three-dimensionally just below the surface of the water over time. The obtained dispersion rate obtained through this technique is informative to the investigation into the relationship among the gravity, surface tensions between oil, water, and air. This technique is based upon the three-dimensional PIV(Particle Imaging Velocimetry) technique and its system mainly consists of a three CCD(Charge Coupled Device) cameras, an image grabber, and a host computer in which an image processing algorithm is adopted for the acquisition of dispersion rate oil an oil droplet.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 V
• /
• pp.2605-2608
• /
• 2003

This paper presents design and implementation methods of the real-time three dimensional tracking system of the gazing point. The proposed method is based on three dimensional data processing of eye images in the 3D world coordinates. The system hardware consists of two conventional CCD cameras for acquisition of stereoscopic image and computer for processing. And in this paper, the advantages of the proposed algorithm and test results ate described.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2006년도 춘계종합학술대회
• /
• pp.209-212
• /
• 2006

This paper presents design and implementation methods of the eye-controlled mouse using the real-time tracking of the three dimensional gazing point. The proposed method is based on three dimensional data processing of eye images in the 3D world coordinates. The system hardware consists of two conventional CCD cameras for acquisition of stereoscopic image and computer for processing. And in this paper, the advantages of the proposed algorithm and test results are described.

• Korean Journal of Radiology
• /
• 제22권9호
• /
• pp.1525-1536
• /
• 2021

Objective: To investigate the feasibility of cine three-dimensional (3D) balanced steady-state free precession (b-SSFP) imaging combined with a non-local means (NLM) algorithm for image denoising in evaluating cardiac function in children with repaired tetralogy of Fallot (rTOF). Materials and Methods: Thirty-five patients with rTOF (mean age, 12 years; range, 7-18 years) were enrolled to undergo cardiac cine image acquisition, including two-dimensional (2D) b-SSFP, 3D b-SSFP, and 3D b-SSFP combined with NLM. End-diastolic volume (EDV), end-systolic volume (ESV), stroke volume (SV), and ejection fraction (EF) of the two ventricles were measured and indexed by body surface index. Acquisition time and image quality were recorded and compared among the three imaging sequences. Results: 3D b-SSFP with denoising vs. 2D b-SSFP had high correlation coefficients for EDV, ESV, SV, and EF of the left (0.959-0.991; p < 0.001) as well as right (0.755-0.965; p < 0.001) ventricular metrics. The image acquisition time ± standard deviation (SD) was 25.1 ± 2.4 seconds for 3D b-SSFP compared with 277.6 ± 0.7 seconds for 2D b-SSFP, indicating a significantly shorter time with the 3D than the 2D sequence (p < 0.001). Image quality score was better with 3D b-SSFP combined with denoising than with 3D b-SSFP (mean ± SD, 3.8 ± 0.6 vs. 3.5 ± 0.6; p = 0.005). Signal-to-noise ratios for blood and myocardium as well as contrast between blood and myocardium were higher for 3D b-SSFP combined with denoising than for 3D b-SSFP (p < 0.05 for all but septal myocardium). Conclusion: The 3D b-SSFP sequence can significantly reduce acquisition time compared to the 2D b-SSFP sequence for cine imaging in the evaluation of ventricular function in children with rTOF, and its quality can be further improved by combining it with an NLM denoising method.

• 한국통신학회논문지
• /
• 제34권11B호
• /
• pp.1311-1319
• /
• 2009

집적 영상 현미경에서 획득한 요소 영상을 이용하여 집적 영상 디스플레이에서 재생하였다. 일반화된 서로 다른 두 렌즈 어레이를 이용하는 집적 영상의 획득과 재생의 관계를 이용하여 집적 영상 현미경 및 디스플레이 시스템에 적용하였다. 집적 영상 현미경에서 획득한 요소 영상을 재생하기 위해서 스케일링이 적용된 요소 영상이 필요하다. 집적 영상을 재생할 때 요소 영상의 정보 손실을 최소화하는 스케일링 계수와 요소 영상의 왜곡을 최소화하는 스케일링 계수를 선택해야 한다. 본 연구에서는 $125{\mu}m$ 피치 사이즈의 마이크로 렌즈 어레이를 가지는 집적 영상 현미경으로 시료를 촬영하고 1mm 피치 사이즈의 렌즈 어레이를 가지는 집적 영상 디스플레이로 촬영된 시료를 3차원 영상으로 재생하는 실험을 수행하였다. 이 때, 요소 영상의 스케일링 계수는 집적 영상 현미경에서 획득한 요소 영상의 정보 손실을 최소화 하는 값으로 설정하였다.

• International Journal of Internet, Broadcasting and Communication
• /
• 제7권2호
• /
• pp.1-8
• /
• 2015

Tracking of an object in 3D space performed in real-time is a significant task in different domains from autonomous robots to smart vehicles. In traditional methods, specific data acquisition equipments such as radars, lasers etc, are used. Contemporary computer technology development accelerates image processing, and it results in three-dimensional stereo vision to be used for localizing and object tracking in space. This paper describes a system for tracking three dimensional motion of an object using color information in real time. We create stereo images using pair of a simple web camera, raw data of an object positions are collected under realistic noisy conditions. The system has been tested using OpenCV and Matlab and the results of the experiments are presented here.

• 대한토목학회논문집
• /
• 제11권4호
• /
• pp.151-162
• /
• 1991

본 연구에서는 자료형태 및 전처리수준이 다른 위성영상자료를 이용하여 전처리수준에 따른 외부표정요소의 최적다항식형태와 위치결정정확도를 파악하고, 지상기준점의 획득방법 및 획득방법에 따른 3차원 위치결정정확도를 분석함으로서 SPOT 위성영상을 이용한 3차원 위치결정이론 및 프로그램을 개발하고 위치결정의 정확도를 향상시키는데 목적이 있다. 본 연구수행 결과 각 전처리수준에 대한 외부표정요소의 최적다항식형태(수준 1B; 15변수, 수준 1AP, 1A; 12변수)를 결정할 수 있었으며, 전처리수준에 따른 위치결정 정확도분석에서는 수준 1AP 위성사진의 정확도가 가장 좋았으나, 수치영상인 수준 1A도 유사한 정확도를 나타냄을 알 수 있었다. 또한, 지상기준점의 획득방법이 다른 수준 1A 수치영상의 3차원 위치결정 정확도를 분석한 결과, 지상기준점의 정확도가 양호한 경우 부가매개변수의 도입만으로 정확도 향상률이 큰 반면 지상기준점의 정확도가 저하되는 경우 부가매개변수의 도입만으로 정확도가 크게 향상되지 않아 조정체계에 과대오차소거이론이 포함된 동시조정이론을 적용함이 바람직함을 알 수 있었다.

• 한국분무공학회지
• /
• 제10권3호
• /
• pp.17-28
• /
• 2005

The Holographic Particle Velocimetry system can be a promising optical tool for the measurements of three dimensional particle velocities. In this study, diffused illumination holographic system to measure the sizes and 3D velocities of moving particles based on automatic image processing was developed. First of all basic optical systems for pulse laser recording, continuous laser reconstruction, and image acquisition, were constructed. To determine the position of particles in the optical axis, new three auto-focusing parameters(AEP), namely, Correlation Coefficient, Sharpness Index, and Depth Intensity were introduced and verified. The developed system was applied to spray droplets to validate the capability of the system. Three dimensional positions of particles viewed from two sides were decided using AFP and then 3D velocities of Particles were extracted by particle tracking algorithm. Comparison of measurement results of sizes and 3D velocities of particles with those obtained by laser instrument, PDPA, showed good consistency of the developed holographic system.