• Journal of the Korean Home Economics Association
• /
• v.41 no.10 s.188
• /
• pp.149-171
• /
• 2003

This study was carried out as a basic fundamental research to propose a theoretical framework for Home Economics curriculum. This research employed the Delphi Method to reach a consensus with the experts in each related educational field of study for putting forth a newly proposed theoretical framework of a Home Economics curriculum. The finally proposed theoretical framework will definitely play a crucial role in establishing a standard framework for educational goals and curriculum content for Home Economics curriculum since it is put forth with a strong agreement from a high proportion of the expert groups. Results on the nature and characteristics of, structural framework of curriculum contents, and literacy through Home Economics were drawn from the 3-round Delphi survey: 1. Home economics has a liberal and practical-critical nature and it promotes enhancement of quality of life through a practical problem-solving process in maintaining family life. 2. The structural framework of the home economics curriculum contents is organized with three-dimensional components of content area (dimension 1), process area (dimension 2), focus of organizing content (dimension 3). 3. One's empowering capability through home economics education is proposed: inquiring knowledge and understanding phenomena for future society, solving practical problems in family life, developing higher order thinking skill, cultivating a positive attitude and a values system toward life.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.29 no.1
• /
• pp.1-9
• /
• 2011

The objective of this paper is to improve the accuracy of the 3D geopositioning extracted from Rational Polynomial Coefficient(RPC) provide in the KOMPSAT-2 metadata files. In this paper, we developed the algorithm to adjust a RFM(Rational Functional Model), and could improve the accuracy of a RFM with this algorithm. Furthermore, when a RFM was adjusted with this algorithm, the effects of the number of GCPs on the accuracy of the adjusted RFM was tested. For accuracy assessment using adjusted RFM, 9 ground control points(GCPs) and 24 check points could be used. Results indicated that the root mean squared errors(RMSEs) of horizontal residual errors calculated 24 check points were 2.20(m). The achieved accuracy of three dimensional object-point determination was 1.72(m) in the X-dimension and 1.37(m) in the Y-dimension and 2.20(m) in the Z-dimension.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.11 no.5
• /
• pp.80-85
• /
• 1997

Preventive diagnosis technique of power transforms is very important for highly reliable operation of power systems, and especially that of online transformer is needed in view of economy. Acoustic methods for partial discharge points have been studied abroad since 1960's in earnest. Electric-ultrasonic locating method by which partial discharges are found through detecting the electric and ultrasonic signal generated in partial discharge and ultrasonic-ultrasonic locating method by which partial discharges are found through detecting two ultrasonic signal with two ultrasonic sensor have been researched in our country. By using this ultrasonic-ultrasonic locating method, it was proposed of graphical determination technique of partial discharge points one dimension, two dimension, three dimension. But in locating partial discharges, they have assumed that the number of signal origin is one. So in this study we suggests a method of locating and knowing the number of signal origins when there are several origins by using ultrasonic-ultrasonic method.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.10 no.1
• /
• pp.125-134
• /
• 2008

Consumers' need for uniqueness reflects individual differences in counterconformity and related to the attitude toward brands as well as purchase behavior. To understand the relationship between consumer's personal characteristics and purchase behavior, the study investigated the effect of consumers' need for uniqueness and clothing interest on the brand consciousness, loyalty and purchase intention. Survey was utilized to collect the data and subjects were 271 college students. Measures consisted of five main constructs: Consumer's need for uniqueness, clothing interest, brand consciousness, brand loyalty, and purchase intention. The measurement and structural models were evaluated using PRELIS 2 and LISREL 8.53. Consumer's need for uniqueness was confirmed to have three constructs: creative, unpopular, and avoidance. The researcher tested Model 1 and developed five other models-Models 2 through 6-based on the results from Model 1 evaluation. The additional Models 2 through 6 were nested in Model 1. To select a best model, the researcher compared the value of chi-square, RMSEA, GFI, AIC, and ECVI. Since Model 6 also illustrated conceptually or theoretically reasonable relationships among constructs as well, it was finally selected as a best model. In the Model 6, the creative dimension of consumer's need for uniqueness had a negative relationship with brand loyalty, while the avoidance dimension of consumer's need for uniqueness had positive relationship. The unpopular dimension of consumer's need for uniqueness and clothing interest had significant positive effects on the brand consciousness. The brand consciousness was significantly related to brand loyalty and brand loyalty to purchase intention.

• Journal of Aquaculture
• /
• v.18 no.3
• /
• pp.180-188
• /
• 2005

The separation performances for thirty different dimensions of a low-pressure hydrocyclone (LPH) were tested in order to obtain an optimum dimension scale for fecal solid removal from an aquaculture system. The geometric variables were considered on two inlet diameters (Di: 30 and 50 mm), five overflow diameters (Do: 30, 50, 60, 70 and 100 mm), and three cylinder lengths (Lc: 250, 345 and 442 mm), while the cylinder diameter (Dc) of 335 mm, underflow diameter (Du) of 50 mm and cone angle (${\theta}$) of $68^{\circ}$ were kept constant. A small size for carp feces was regarded as the target for the removal of solids. Spherical polystyrene particles (1.1-1.3 mm dia., ${\rho}_s=1.05g/cm^3$), which demonstrate a similar settling velocity and specific gravity to the carp feces, were used as feed. The separation performance was tested in the range of 330 to 1200 ml/s of the inflow rate. Experimental results using ANCOVA and the Tukey test (${\alpha}=0.05$) demonstrated that the separation performances of LPH were significantly affected (P<0.05) by fi, Di and Do. In contrast, there was no significant Lc effect (P>0.05) on the separation performances. The maximum separation performance was detected at dimension combinations of 30 mm of inflow diameter (Di), 50, 60 and 70 mm of overflow diameter (Do), 345 mm of cylinder length (Lc). The dimension proportions were 0.09, 1.03, 0.15-0.21 and 0.15 (or Di/Dc, Lc/Dc, Do/Dc and Du/Dc, respectively.

• Journal of Aquaculture
• /
• v.18 no.3
• /
• pp.189-195
• /
• 2005

By testing the separation performance for a fine settleable solid removal system in an aquaculture system using polystyrene particles as an experimental substitute, the optimal geometric dimensions for a Low-Pressure Hydrocyclone (LPH) were obtained. The design approach far the LPH took into consideration two inflow diameters (Di: 30, 50 mm), three overflow diameters (Do: 60, 70, 100 mm) and four cylinder lengths (Lc: 250, 345, 442, 575 mm), while the cylinder diameter (Dc) at 335 mm, the underflow diameter (Du) at 50 mm and the cone angle (${\theta}$) at $68^{\circ}$ were kept constant. The separation performances of 19 different dimension combinations of LPH were tested, ranging from 300 to 1200 ml/sec of inflow rate using substitute polystyrene particles (0.4-0.7 mm dia., ${\rho}_s=1.05g/cm^3$). These polystyrene particles exhibit a similar density and settling velocity to the fine fecal debris of the common carp. The total separation efficiency for the inflow rate ranged from a high of 97% to a low of 20%. Experimental results obtained by ANCOVA and the Tukey test (${\alpha}=0.05$) showed that the separation performances of the LPH were significantly affected (P<0.05) by the fi, Di, Do and Lc. The maximum separation performance was detected at a dimension combination of 30 mm of inflow diameter (Di), 60 mm of overflow diameter (Do), 442 and 575 mm of cylinder length (Lc). The dimension proportions were 0.09, 1.32-1.72, 0.18 and 0.15 for Di/Dc, Lc/Dc, Do/Dc and Du/Dc respectively.

• Journal of the Korea Convergence Society
• /
• v.11 no.2
• /
• pp.331-339
• /
• 2020

The purpose of this study was to develop and validate future teacher competencies diagnosis tools required for pre-service teachers. In this study, the hypothesis model was established by hierarchizing basic competency and job competency in three dimensions such as knowledge, practice, and personality as teachers' competencies required in future society. Based on this hypothesis model, 54 preliminary questions were developed, and competencies diagnosis test was conducted for 237 pre-service teachers in J area, Korea. The results of this study are as follows: First, as a result of this study, a total of 53 questions were extracted, including 18 questions with 6 factors in the knowledge dimension, 17 questions with 6 factors in the practice dimension, and 18 questions with 6 factors in the personality dimension. Second, the goodness-of-fit of future teacher competencies diagnosis model required was verified, and convergence and discriminant validity were verified. The results of this study were discussed. Finally, the implications and suggestions for further research were presented.

• Imaging Science in Dentistry
• /
• v.45 no.1
• /
• pp.41-47
• /
• 2015

Purpose: This study was performed to evaluate the linear distance accuracy and reliability of stitched small field of view (FOV) cone-beam computed tomography (CBCT) reconstructed images for the fabrication of implant surgical guides. Material and Methods: Three gutta percha points were fixed on the inferior border of a cadaveric mandible to serve as control reference points. Ten additional gutta percha points, representing fiduciary markers, were scattered on the buccal and lingual cortices at the level of the proposed complete denture flange. A digital caliper was used to measure the distance between the reference points and fiduciary markers, which represented the anatomic linear dimension. The mandible was scanned using small FOV CBCT, and the images were then reconstructed and stitched using the manufacturer's imaging software. The same measurements were then taken with the CBCT software. Results: The anatomic linear dimension measurements and stitched small FOV CBCT measurements were statistically evaluated for linear accuracy. The mean difference between the anatomic linear dimension measurements and the stitched small FOV CBCT measurements was found to be 0.34 mm with a 95% confidence interval of +0.24 - +0.44 mm and a mean standard deviation of 0.30 mm. The difference between the control and the stitched small FOV CBCT measurements was insignificant within the parameters defined by this study. Conclusion: The proven accuracy of stitched small FOV CBCT data sets may allow image-guided fabrication of implant surgical stents from such data sets.

• Development and Reproduction
• /
• v.18 no.1
• /
• pp.33-41
• /
• 2014

We investigated the process of yolk absorption in Korean rose bitterling, Rhodeus uyekii, and determined the changes in its morphometric characteristics. The R. uyekii from 1 days post hatching (DPH) to 21 DPH, the eye diameter (ED) was 5.4 at 5 DPH. Thereafter, the ED/total length (TL) ratio increased to 10.7 at 21 DPH (p<0.05). The yolk length (YL) decreased from 95.4 to 1.1 by 21 DPH, and this rate of decrease was greater than that for any other dimension (p<0.05). 12 morphometric dimensions/TL for the R. uyekii were measured at each sampling day from 21 DPH to 170 DPH. At just hatching, the average TL and BW were $6.1{\pm}0.09mm$ and $4.9{\pm}0.07mg$, respectively. At 53 DPH, the average TL was $12.9{\pm}0.28mm$ and the average BW was $14.7{\pm}0.72mg$; the total length growth equation was $TL=5.507e^{0.038t}$ ($R^2=0.916$). Further, the body weight growth equation was $BW=3.3647e^{0.0296t}$ ($R^2=0.9354$). The dimensions with regard to body depth showed the greatest growth rates in the external characteristics of the fish (p<0.05). The patterns of the morphometric characteristics measured in this study can be classified in three ways. The patterns were shown to be increased (y=0.0992x+12.07, $R^2=0.8333$), decreased (y=-0.0569x+42.029, $R^2=0.8395$) or maintained (y=0.005x+18.263, $R^2=0.3678$) from 21 DPH to 170. These results will provide useful indices for the successful rearing of the R. uyekii.

• Health Policy and Management
• /
• v.12 no.4
• /
• pp.34-55
• /
• 2002

In this study, the impact of organizational culture on the quality of social work services in hospitals were empirically analysed. A mailed questionnaire survey was conducted between February 19 and April 10, 2001. A sample of total 70 hospitals, including general hospitals with one social worker at least and single-department hospital with two social workers or more, were identified nationwide through the registry of Korean Association of Medical Social Workers and Korean Association of Hospitals. According to coping strategy and reacting pattern with the environmental changes, four types of organizational culture in each hospital, classified as group culture, developmental culture, hierarchial culture, and rational culture, were adopted for the independent variables. Three dimensional aspects of quality of social work service - structure, process, and outcome were selected as dependent variables in this study. Also the quality of social work service was distributed into provider-perceiving quality and consumer-perceiving quality The major findings were as following in summary; First, most social workers reported that the characteristic of culture in their hospitals are group culture the first, hierarchial culture the second, developmental culture the third, and rational culture finally in order of comparing the level of quality perceived between social worker's recognition. Second, service provider and consumer, The provider-perceiving quality showed less score than that of consumer, especially the lowest was the score of quality of outcome perceived by provider. Third, according to the types of organizational culture, there were significantly different levels of quality in total social work services, structure dimension and process dimension. The quality of outcome dimension did not show significant differences among the type of organizational culture. Finally, the most influential variables to the quality of social work service ice proved departmental form of social work unit, leader of social work unit, and developmental culture of hospital To assure quality services, accordingly, social work unit in hospital is required to be organized as a single unit, that means to be an independent department of which qualified social worker is supposed to control the unit. It is strongly recommended to develop leadership for the leaders of social work unit.