• 한국전기전자재료학회논문지
• /
• 제22권8호
• /
• pp.694-697
• /
• 2009

The separated three-phase flux-coupling type superconducting fault current limiter(SFCL) is composed of a series transformer and superconducting unit of the YBCO coated conductor. The primary and secondary coils in the transformer were wound in series each other through an iron core and the YBCO coated conductor was connected with secondary coil in parallel. In this paper, we investigated the current limiting characteristics through winding number of coil 2 and winding direction in the flux-coupling type SFCL. Through the analysis, it was shown that additive polarity condition and lower winding number of coil 2 have advantaged from the point of view of fault current limiting and burned of YBCO coated conductor.

• 한국콘텐츠학회:학술대회논문집
• /
• 한국콘텐츠학회 2005년도 추계 종합학술대회 논문집
• /
• pp.548-551
• /
• 2005

본 연구에서는 3푹 가속도센서를 소형 센서모듈로 구성하고 이를 사람의 신체 부위에 부착하여 센서의 3차원적 방향에 구애되지 않고 동작에 의한 중력방향의 가속도를 계산할 수 있는 장치와 알고리즘을 개발하였다. 센서모듈을 이용하여 컴퓨터 시스템에 의해 사람의 보행 및 동작을 측정하기 위해서는 정량적인 처리가 가능하도록 데이터를 가공하여야 한다. 센서 모듈로부터 데이터의 획득, 가능한 범위의 직교 좌표계로 변환, 중력방향의 단일 스칼라 값 변환의 과정으로 센서 출력 데이터를 정규화 하였다.

• Clinics in Shoulder and Elbow
• /
• 제3권1호
• /
• pp.10-19
• /
• 2000

The aims of this retrospective study were to evaluate the results of inferior capsular shift operation which were approached anteriorly or posteriorly according to a main instability direction in contact sports population who had multidirectional shoulder instability. Fifty-three shoulders in 47 athletes who engaged in contact sports underwent an anterior or posterior inferior capsular shift procedure for the correction of multidirectional instability of the shoulder joint. The surgical approach was selected according to the predominant direction of the instability. Follow up was average of 42 months(24∼73 months). After anterior inferior capsular shift, anterior dislocation was recurred in three shoulders, posterior dislocation in one, and inferior dislocation in two shoulders. After posterior inferior capsular shift, one dislocation occurred anteriorly, one inferiorly and one posteriorly. The excessive tightening of capsule or improper diagnosis could be causative factors for the development of dislocation in the opposite direction to the preoperative major instability. Of six patients who could not return to their sports, five had bilateral repairs. Successful repair based on the criteria of the American shoulder and elbow association was achieved in 92% of anterior repairs, and 81 % of posterior repairs.

• KIEE International Transactions on Electrophysics and Applications
• /
• 제3C권5호
• /
• pp.182-188
• /
• 2003

We have demonstrated a fluidic technique for self-assembly of microfabricated parts onto substrate using patterned shapes of magnetic force self-assembled monolayers (SAMs). The metal particles and the array were fabricated using the micromachining technique. The metal particles were in a multilayer structure (Au, Ti, and Ni). Sidewalls of patterned Ni dots on the array were covered by thick negative photoresist (SU-8), and the array was magnetized. The array and the particles were mixed in buffer solution, and were arranged by magnetic force interaction. Binding direction of the metal particle onto Ni dots was controlled by multilayer structure and direction of magnetization. A quarter of total Ni dots were covered by the particles. The binding direction of the particles was controllable, and condition of particles was almost even with the Au surface on top. The particles were successfully arranged on the array.

• 한국구조물진단유지관리공학회 논문집
• /
• 제11권3호
• /
• pp.123-131
• /
• 2007

본 연구에서는 등분포 하중을 받는 섬유 보강 복합재료 관의 좌굴 거동을 분석하였다. 등방성의 원통형 구조물의 경우, 좌굴 형상은 단면만 변형할 뿐 길이방향으로의 단면 형상은 일정한 2차원 좌굴이 발생하나, 섬유 보강 복합재료와 같은 이방성 재료로 구성된 원통형 구조물의 경우에는 길이 방향으로 단면의 형상이 변화하는 3차원 좌굴이 발생하게 된다, 또한 적층 구조물에서는 적층각의 변화에 따라 각 방향에 따른 재료의 강도가 변화하므로, 적층각의 변화는 구조물의 강도를 변화시킨다. 본 연구에서는 원통형 적층 구조물의 2차원 좌굴과 3차원 좌굴의 경계를 조사하고, 적층각 변화에 따른 섬유 보강 복합재료 관의 좌굴 강도를 평가하였다.

• 한국기계가공학회지
• /
• 제9권1호
• /
• pp.81-86
• /
• 2010

This paper investigated into process characteristics of AlTiN coated layers for machining to the direction of upper and lower in plastic mold material (KP-4) with the cemented carbide ball endmill with the diameter of 8mm coated AlTiN layers (1~4) step by step using machining center. The material used in experiments was KP-4 that was machined by three types of inclined angles; $15^{\circ}$, $30^{\circ}$ and $45^{\circ}$ As estimated mechanical properties of AlTiN coated layers, it was shown the most result in the condition of three layered coating that the coating that the coating depth, the hardness of the coated layer and the surface roughness of the coated layer were $13{\mu}m$, Hv 3027.3 and $0.042{\mu}m$, respectively. The cutting component was better at the condition of upper direction than that of lower direction in all experimental conditions and indicated to be less which the bigger angle of the material was increased the effective diameter of the tool.

• 한국IT서비스학회지
• /
• 제10권1호
• /
• pp.65-72
• /
• 2011

In this paper, we consist of three dimensional acceleration sensor as a small-sized sensor module to acquire base technologies that need to estimate exhibition audience' moving distance. and that we developed algorism and device that can calculate acceleration in gravity direction with attaching it to people's body part without regard to three dimensional direction. By making use of the sensor module, we have to process the data that let it quantitatively process possible to measure people's walk and movement by computer system. We normalized sensor output data in the process of change from sensor module to acquisition of data, rectangular coordinates and single scalar acceleration value in gravity direction. Printed out sensor data attaching sensor module to people's body part is used for motion pattern detection after normalization, Motion sensor devised mode change algorism because it print data of other pattern according to attached position of body. For algorism design, we collected data occurring during walking about subject and we also defined occurring problem domain after analyzing the data. We settle defined problem domain and that we simulated the walking number measuring instrument with highly efficient in restricted environment.

• 한국운동역학회지
• /
• 제32권3호
• /
• pp.80-86
• /
• 2022

Objective: The purpose of this study was to investigate the effects of three rotational jump conditions (standing jump, left rotational jump and right rotational jump) on stability through center of pressure (COP) and EMG variables analysis. Method: A total of 16 college students (age: 24.13 ± 7.17 years, height: 169.24 ± 8.23 cm, weight: 65.65 ± 13.88 kg) participated in this study. The study used wireless two COP plates and wireless eight channel EMG. The analyized variables were 11 variables for COP and RMS for EMG, which were analyzed using one-way analysis of variance with repeated measures according to three rotational jump conditions. Results: Among the COP variables, left rotational jump (LRJ) and right rotational jump (RRJ) were larger than standing jump (SJ) for left and right amplitude, area, total displacement, and average velocity for both feet among the variables of COP, and for area of the left foot, RRJ was larger than that of SJ. Among the EMG variables, there was no statistical difference between the muscle activations, but the muscle activity was significantly higher in the order of RRJ, LRJ, and SJ according to direction of rotation. Conclusion: Although the results of COP and EMG were not consistent through this study, it can be expected that the differences in COP was due to the amount of rotation during rotational jump-landing in the left and right directions, and that the EMG is determined by the lateral movements required for rotation.

• 한국실내디자인학회논문집
• /
• 제21권5호
• /
• pp.328-335
• /
• 2012

Due to development of digital technology, a concept of stage design management is being changed. In addition, stage management technique is changing a viewpoint of the audience watching a stage through the convergence of analogue and digital technology. Three-dimensional media such as LED and hologram and works combining with previous stage performances are rising, and the audience's requirements about spectacles on the stage are increasingly higher. Interaction between a stage, audiences and actors is a communication tool by a work story and its direction. In other words, stage design should newly focus on not only concluded work story but also comprehensive delivery of direction and the expression and extreme delivery. Therefore, this study aims to examine how to combine analogue and digital direction elements in the stage design. To this end, this study looks into everything the audience feels through performances and analogue and digital elements directed for performances and then analyzes and arranges them to present a possibility of various types of work performances. Stage structure, set, and lighting that are analogue direction elements are the basis of stage performance. Analogue direction elements mean a media vehicle that can differentiate except for basic direction of each work. This study aims to analyze new performance culture when analog and digital direction elements are combined through stage performance and a possibility of new stage performance. In addition, through this it desired to seek for a development possibility of Korean leisure culture and art culture. As the work cases, this study shows 10 works through actual stage performances held in Korea and introduces elements directed in those works.

• Structural Engineering and Mechanics
• /
• 제14권6호
• /
• pp.733-738
• /
• 2002

A simplified rational method is developed to evaluate transverse earthquake-induced forces in continuous bridges. This method models the bridge as a beam on elastic foundation, and assumes a sinusoidal curve for both vibration mode shape and deflected shape in the transverse direction. The principle of minimum total potential is used to calculate the displacements and the earthquake-induced forces in the transverse direction. This method is concise and easy to apply, and hence, offers an attractive alternative to a lengthy and time consuming three dimensional modeling of the bridge as given by AASHTO under its Single Mode Spectral Analysis Method.