• Atmosphere
• /
• v.25 no.2
• /
• pp.235-248
• /
• 2015

In this study, we analyzed the three dimensional variations (latitude, longitude, and height of Jet core) and wind speed of upper Jet stream in the East Asian region using recent 35 years (1979~2013) of four reanalysis data (NCEP-R2, MERRA, ERA-Interim. and JRA-55). Most of Jet core is located in $30.0{\sim}37.5^{\circ}N$ and $13.0{\sim}157.5^{\circ}E$ although there are slight differences among the four reanalysis data. The wind speed differences among reanalysis are about $3m\;s^{-1}$ regardless of seasons, the weakest in NCEP-R2 and the strongest in JRA-55. Although significance level is not high, most of reanalysis showed that the Jet core has a tendency of southward moving during spring and winter, but moving northward during summer and fall. This amplified seasonal variation of Jet core suggests that seasonal variations of weather/climate can be increased in the East Asian region. The longitude of Jet core has a tendency of systematically westward moving and decreasing of zonal variations regardless of averaging methods and reanalysis data. In general, the Jet core shows a tendency of moving south-west-ward and upward, getting intensified during spring and winter regardless of the reanalysis data. However, the Jet core shows a tendency of moving westward and downward, and getting weakened during summer. In fall, there were no distinctive trends not only in wind speed but also three dimensional locations compared to other seasons. Although the significance levels are not high and variation patterns are slightly different according to the reanalysis data, our findings are more or less different from the previous results. So, more works are needed to clarify the three dimensional variation patterns of Jet core over the East Asian region as a result of global warming.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.7
• /
• pp.138-146
• /
• 2003

A critical issue in area-based stereo matching lies in selecting a fixed rectangular window size. Previous stereo methods doesn't deal effectively with occluding boundary due to inevitable window-based problems, and so give inaccurate and noisy matching results in areas with steep disparity variations. In this paper, a variable window approach is presented to estimate accurate, detailed and smooth disparities for three-dimensional structure reconstruction. It makes the smoothing of depth discontinuity reduced by evaluating corresponding correlation values and intensity gradient-based similarity in the three-dimensional disparity space. In addition, it investigates maximum connected match candidate points and then devise the novel arbitrarily shaped variable window representative of a same disparity to treat with disparity variations of various structure shapes. We demonstrate the performance of the proposed variable window method with synthetic images, and show how our results improve on those of closely related techniques for accuracy, robustness, matching density and computing speed.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.9 s.174
• /
• pp.115-122
• /
• 2005

Errors resulting from magnification variations of a optical system are largely generated in three-dimensional shape measurements based on depth-from-focus. In the case of measuring the surface morphology of tiny objects based on DFF, images are acquired with a very small interval so that magnification changes can be minimized. However, the magnification variations are actually existed in the acquired images and so focus measures are wrongly or ambiguously extracted. In this paper, a methodology with linear magnification calibrations, based on DFF, is proposed to make more accurate measurement in surface morphology with high depth discontinuity, compared with previous ones. Several experiments show that the proposed method outperforms existing ones without magnification calibrations.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.284-287
• /
• 2003

Previous stereo methods doesn't deal effectively with depth discontinuity due to inevitable window-based problems, and so give inaccurate and noisy matching results in areas with steep disparity variations. In this paper. a variable window approach is presented to estimate accurate, detailed and smooth disparities with three-dimensional disparity space. It makes the smoothing of depth discontinuity reduced by evaluating corresponding correlation values and intensity gradient-based similarity in the space. In addition, it devises the novel arbitrarily-shaped variable window to treat with disparity variations of various structure shapes. We show how our results improve on those of closely related techniques for accuracy, robustness. matching density and computing speed.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.51 no.1
• /
• pp.107-112
• /
• 2018

One-dimensional numerical model is implemented to investigate temperature variations in the mixed layer depth (MLD) with the passage of typhoons. In the model, we assume a non-divergent, infinite ocean and consider wind effects only, excluding isostatic effects (inverse barometric effects) and upwelling with vertical movement of the water column. Numerical experiments investigate the effects of typhoon tracks on temperature variations, including their dependence on vertical resolutions in the MLD and these results are compared with those in a three-dimensional primitive equation model (POM). The model reproduces features of the observed temperature variations in the MLD fairly well, and implies that wind effects, rather than isostatic effects, play a predominant role in temporal and spatial temperature variations in the MLD. After the passage of typhoons, however, the model does not reproduce well the temperature variations observed in the MLD, because a limitation of the model is its inability to reproduce events such as cyclonic eddy formation (Hong et al., 2011; Masuda and Hong, 2011). The model also shows well the so called 'rightward bias' (Price, 1981) of sea surface cooling which is the most predominant in the right hand side of typhoon's track.

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.956-961
• /
• 2003

Direct numerical simulations of flow over a circular cylinder are performed at two different Reynolds numbers (Re=220 and 300) that correspond to three-dimensional instabilities of mode A and mode B, respectively, to investigate the characteristics of drag and lift at these Reynolds numbers. The drag and lift coefficients are measured locally along the spanwise direction and their characteristics are studied in detail. The variation of total drag in time is large at Re=220, and the total drag becomes minimum when vortex dislocation occurs in the wake. The drag and lift variations in space are also closely associated with the evolution of vortex dislocation at this Reynolds number. At Re=300, vortex dislocation is not found in the wake and temporal variations of drag and lift are much smaller than those at Re=220, but their spatial variations are quite large due to the near-wake secondary vortices existing in the mode B instability.

• Tunnel and Underground Space
• /
• v.5 no.2
• /
• pp.95-103
• /
• 1995

In this paper the stress redistribution around tunnel face was analyzed by using a three-dimensional finite element model. The effects of in-situ stress levels, excavation sequences, stiffness difference between the hard ground and the weak zone on the stress redistributions were considered. Displacement and stress changes at tunnel crown, side wall, and invert were investigated throughout the sequential excavation. To show ground response, percentage of the displacement and stress variations are used as a function of normalized distance that is between the face and monitoring section. Preceding displacements and stress variations were presented to be adopted in the two-dimensional tunnel analysis.

• PNF and Movement
• /
• v.22 no.2
• /
• pp.315-324
• /
• 2024

Purpose: The aim of this study was to compare the activation of shoulder stabilizer muscles to variations of manual resistance during three-dimensional shoulder rehabilitation exercises. Methods: A total of 13 participants were included in this study. To normalize each muscle's activity, a maximal isometric voluntary contraction was performed by all participants. After receiving 30 minutes of training in three-dimensional shoulder rehabilitation exercises, participants randomly performed PNF arm and scapular patterns according to the intensities of manual resistance. The activities of the upper trapezius, lower trapezius, and serratus anterior were measured during these patterns. All exercises were performed for five seconds, and the average of three seconds, excluding the first and last seconds, was used for data analysis. Results: Lower trapezius activity was significant among manual resistance intensities. In both the PNF arm and scapular patterns, using 80% manual resistance of maximum resistance showed higher activity of the lower trapezius muscle compared to 20% of the maximum resistance. Conclusion: It is expected that PNF arm and scapular patterns, with varying intensities of manual resistance, can be used for early rehabilitation of patients with shoulder impingement syndrome.

• The Korean Journal of Pain
• /
• v.27 no.3
• /
• pp.253-259
• /
• 2014

Background: Caudal block is a common technique in children for reducing postoperative pain, and there have been several reports on the variations of the sacral canal in children. However, previous studies have mainly focused on the needle trajectory for caudal block, and there is limited information on the structural variations of the sacrum in children. The purpose of this study was to analyze the anatomic variations of sacral canals in children. Methods: Three-dimensional computed tomographic images were analyzed. The data from the images included (1) fusion of the sacral vertebral laminae and the sacral intervertebral space (2) existence of the sacral cornua and (3) the types of sacral hiatus. The types of sacral hiatus were classified into 3 groups: group I (fusion of S3 or S4 vertebral laminae), group II (unfused vertebral arch with the distance of the S3 and S4 vertebral laminae < 50% of the distance between the cornua), and group III (unfused vertebral arch with the distance of the S3 or S4 vertebral laminae ${\geq}50%$ of the distance between the cornua). Results: A total of 143 children were included in this study. All of the sacral vertebral arches were not fused in 22 children (15.4%). Cornua were not identified bilaterally in 5 (3.5%) and unilaterally in 6 (4.2%) children. In the sacral hiatus, group II and group III were identified in 22 (15.4%) and 31 (21.7%) children, respectively. Conclusions: The sacral canal has various anatomical variations in children. Careful attention must be paid to identify the correct anatomic landmark.

• Archives of Plastic Surgery
• /
• v.50 no.3
• /
• pp.254-263
• /
• 2023

Background The three-dimensional (3D) evaluation of skeletal stability after orthognathic surgery is a time-consuming and complex procedure. The complexity increases further when evaluating the surgery-first orthognathic approach (SFOA). Herein, we propose and validate a simple time-saving method of 3D analysis using a single software, demonstrating high accuracy and repeatability. Methods This retrospective cohort study included 12 patients with skeletal class 3 malocclusion who underwent bimaxillary surgery without any presurgical orthodontics. Computed tomography (CT)/cone-beam CT images of each patient were obtained at three different time points (preoperation [T0], immediately postoperation [T1], and 1 year after surgery [T2]) and reconstructed into 3D images. After automatic surface-based alignment of the three models based on the anterior cranial base, five easily located anatomical landmarks were defined to each model. A set of angular and linear measurements were automatically calculated and used to define the amount of movement (T1-T0) and the amount of relapse (T2-T1). To evaluate the reproducibility, two independent observers processed all the cases, One of them repeated the steps after 2 weeks to assess intraobserver variability. Intraclass correlation coefficients (ICCs) were calculated at a 95% confidence interval. Time required for evaluating each case was recorded. Results Both the intra- and interobserver variability showed high ICC values (more than 0.95) with low measurement variations (mean linear variations: 0.18 mm; mean angular variations: 0.25 degree). Time needed for the evaluation process ranged from 3 to 5 minutes. Conclusion This approach is time-saving, semiautomatic, and easy to learn and can be used to effectively evaluate stability after SFOA.