• 한국표면공학회지
• /
• 제50권6호
• /
• pp.427-431
• /
• 2017

Anodic aluminum oxide (AAO) film has recently attracted much attention as a key material for the fabrication of various nanostructures. A control of anodizing voltage (U) was employed to render different anodic aluminum oxide (AAO) nanostructures with pore diameter ($D_p$) and interpore distance ($D_{int}$) in oxalic acid. In this work, we study the effect of stepwise modulation of anodizing voltages on the shape and dimension of porous structures along the vertical direction and demonstrate the fabrication of hierarchical layers of systematically controlled three-dimensional (3D) pore profile.

• 한국정밀공학회지
• /
• 제15권7호
• /
• pp.119-128
• /
• 1998

In this paper, nonsteady state shaped drawing process has been investigated using the three-dimensional rigid-plastic finite element method. In order to analyze the shaped drawing process, a method to define straight converging die considering straight die part, die radius part and bearing part has been proposed. In addition, the modeling of initial billet and the generation procedure of mesh system have been suggested. The three-dimensional rigid-plastic finite element simulation has been performed for a square sectional drawing process and its result has been confirmed in comparison with the existing experimental one. Also, for the same process conditions, the effect of perimeter ratio in the shaped drawing process has been investigated.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2019년도 추계 학술논문 발표대회
• /
• pp.14-15
• /
• 2019

In this paper, it was tried to prove the possibility and effect of coordinate measurement by using MEP layout equipment at the construction stage, and to propose a method to improve measurement accuracy during construction. For this study, the passenger terminal site, which is a long span structure, was selected and compared with three dimensional CAD drawings and construction measurement results using MEP layout equipment for the precise construction of long-span irregular curved roof layers. As a result, it was found that it is possible to construct three-dimensional curved roof layers using MEP layout equipment through measurement and analysis.

• Journal of information and communication convergence engineering
• /
• 제21권2호
• /
• pp.145-151
• /
• 2023

This study aimed to determine whether there is a significant difference in play properties in the case of media conversion through the combination of analog three-dimensional puzzles and immersive media in children's experience. Based on Roger Caillois' play theory and the contents of previous research, an experience was conducted on an experimental group and control group, and a questionnaire was prepared. The results of the correlation and paired t-test analysis showed that the play properties were higher and more evenly distributed in the media conversion immersive experience. This implies that an increase in children's fun during the immersive experience further increases their immersion, suggesting that the use of immersive media may have a positive effect on children who achieve holistic development through play and experience. We hope that this study will help recognize the difference in effectiveness through conversion into immersive media and will be referenced in various media studies that consider double-play properties.

• 대한조선학회논문집
• /
• 제47권1호
• /
• pp.38-46
• /
• 2010

This study aims at investigating the effect of the baffle height on the liquid sloshing in the three-dimensional (3D) rectangular tank. In order to simulate the 3D incompressible viscous two-phase flow in the 3D tank with partially filled liquid, the present study has adopted the volume of fluid (VOF) method based on the finite-volume method which has been well verified by comparing with the results of the relevant previous researches. The ratio of the baffle height ($h_B$) to filling level (h) has been changed in the range of $0{\leq}h_B/h{\leq}1.2$ to observe the effect on the impact loads on the side wall and free surface behavior. Generally, as baffle height increases, the impact pressure on the wall decreases and the deformation of free surface becomes weaker. However it seemed that a critical ratio of the baffle height existed to reveal the lowest impact pressure on the wall. Consequently, $h_B/h=0.8$ among $h_B/hs$ considered in the study showed the lowest impact pressure.

• 보존과학회지
• /
• 제36권4호
• /
• pp.264-274
• /
• 2020

The Choijin Lama Temple is a representative example of 19th- to 20th-century architecture. The temple has been damaged by various development pressures and the effect of a harsh continental climate. This study digitalized the entire temple site using three-dimensional scanning to establish the basic data of conservational management and monitoring for spatial changes. A terrestrial laser scanning model of the temple was completed, which showed low registering error vectors (3.73 mm average) and dense point distances. Unmanned aerial vehicle (UAV) photogrammetry was also applied to verify its applicability to the spatial and environmental monitoring of the temple. The results showed that the overall point density of the UAV photogrammetry model is similar within a 10 mm resolution. The relatively low RMSE of UAV photogrammetry from the ground to the uppermost roof indicates the high applicability of integrating it with the terrestrial laser scanning model. The digital documentation of the Choijin Lama Temple is expected to have a great ripple effect on the documentation, conservation, and utilization of Mongolian cultural heritage sites.

• 한국분말재료학회지
• /
• 제18권5호
• /
• pp.406-410
• /
• 2011

Green strength is an important property of powders since high green strength guarantees easy and safe handling before sintering. The green strength of a powder compact is related to mainly mechanical and surface characters, governed by interlocking of the particles. In this study, the effect of powder surface roughness on the green strength of iron powders was investigated using a transverse rupture test. Three-dimensional laser profiler was employed for quantitative analyses of the surface roughness. Two different surface conditions, i.e. surface roughness, of powders were compared. The powders having rough surfaces show higher green strength than the round surface powders since higher roughness leads increasing interlocked area between the contacting powders.

• Structural Engineering and Mechanics
• /
• 제3권2호
• /
• pp.121-133
• /
• 1995

It is well known that two-dimensional simplified third-order theories satisfy the layer interface continuity of transverse shear strains, thus these theories violate the continuity of transverse shear stresses when two consecutive layers differ either in fibre orientation or material. The third-order theories considered herein involve four/or five dependent unknowns in the displacement field and satisfy the condition of vanishing of transverse shear stresses at the bounding planes of the plate. The objective of this investigation is to examine (i) the flexural response prediction accuracy of these third-order theories compared to exact elasticity solution (ii) the effect of layer interface continuity conditions on the flexural response. To investigate the effect of layer interface continuity conditions, three-dimensional elasticity solutions are developed by enforcing the continuity of different combinations of transverse stresses and/or strains at the layer interfaces. Three dimensional twenty node solid finite element (having three translational displacements as degrees of freedom) without the imposition of any of the conditions on the transverse stresses and strains is also employed for the flexural analysis of the laminated plates for the purposes of comparison with the above theories. These shear deformation theories and elasticity approaches in terms of accuracy, adequacy and applicability are examined through extensive numerical examples.

• 한국의상디자인학회지
• /
• 제9권3호
• /
• pp.35-46
• /
• 2007

The purpose of this study was to modify a Flared Skirt for women according to the somatotype of lower body. The subjects for the wear test were 3 students, who were in mean${\pm}1{\sigma}$ each somatotype. As seen in the study, it was found out that there was a difference in three dimensional shape of the lower part of the body even in the group of whom the body heights, measured by Martin's system, are alike. Due to such a difference in the three dimensional shape of the lower part of the body, it was found out to be a difference in drapability of the flare skirts. In order to have better fitness of the lower part of the body and to raise the visual effect, therefore, it is suggested that there need to develop a new model of the flare skirts considering three dimensional shape of the lower part of the body for the wearer or to take complementary measures for each body shape in case of applying traditional model.

• Nuclear Engineering and Technology
• /
• 제53권5호
• /
• pp.1602-1611
• /
• 2021

A varying degree of eccentricity always exists in the initial configuration of a nuclear fuel rod. Its impact on traditional LWR fuel is limited as the radial gap closes relatively early during irradiation. However, the effect of misalignment is expected to be more relevant in rods with highly conductive fuels, large initial gaps and low conductivity filling gases. In this paper, we study similar characteristics in the experimental setup of two fuel disc irradiation campaigns carried out in the OECD Halden Boiling Water Reactor. Using the multi-dimensional fuel performance code OFFBEAT, we combine 2-D axisymmetric and 3-D simulations to investigate the effect of eccentricity on the fuel temperature distribution. At the same time, we illustrate how the advent of modern tools with multi-dimensional capabilities might further improve the design and interpretation of in-pile separate-effect tests and we outline the potential of such an analysis for upcoming experiments.