• Korean Journal Plant Pathology
• /
• v.2 no.3
• /
• pp.150-157
• /
• 1986

Effects of presservation methods on viability and virulence of Xanthosmonas compestris pv. oryzae were investigated. The incidence of colony-type variants from freeze-dried and deep-frozen cultures was also determined. The suspending medium for freeze-dried cultures containing $10\%$ sucrose and $1\%$ gelatin showed the highest viability, and the virulence was well maintained in the suspending medium containing $2\%$ dextrin, $0.5\%$ ascorbic acid, 0.5% ammonium chloride, $0.5\%$ thiourea, and $0.85\%$ NaCl. Serially transferred cultures became attenuated. Rough colonies which had wrinkled surface occurred at a frequency of $1.9\%$ to $15.8\%$ during freeze-drying and freezing. The rough colonies consisted of nonseptated filamentous cells and rod-shaped cells. The virulence of rough colonies was weak as compared with the normal colony type.

• Journal of Microbiology and Biotechnology
• /
• v.17 no.1
• /
• pp.89-95
• /
• 2007

Improvements in the dissolution of proteins in two-dimensional gel electrophoresis have greatly advanced the ability to analyze the proteomes of microorganisms under a wide variety of physiological conditions. This study examined the effect of various combinations of chaotropic agents, a reducing agent, and a detergent on the dissolution of the Streptomyces peucetius cytosolic proteins. The use of urea alone in a rehydration buffer as a chaotropic agent gave the proteome a higher solubility than any of the urea and thiourea combinations, and produced the highest resolution and clearest background in two-dimensional gel electrophoresis. Two % CHAPS, as a detergent in a rehydration buffer, improved the protein solubility. After examining the effect of several concentrations of reducing agent, 50 mM DTT in a rehydration buffer was found to be an optimal condition for the proteome analysis of Streptomyces. Using this optimized buffer condition, more than 2,000 distinct and differentially expressed soluble proteins could be resolved using two-dimensional gel electrophoresis with a pI ranging from 4-7. Under this optimized condition, 15 novel small proteins with low-level expression, which could not be analyzed under the non-optimized conditions, were identified. Overall, the optimized condition helped produce a better reference gel for Streptomyces peucetius.

• Environmental Engineering Research
• /
• v.13 no.4
• /
• pp.171-176
• /
• 2008

Studies on visible-light-driven photocatalysis of air pollutants at indoor air quality (IAQ) levels have been limited. Current study investigated visible-light derived photocatalysis with N-doped and S-doped titanium dioxide ($TiO_2$) for the control of benzene at indoor levels. Two preparation processes were employed for each of the two types of photocatalyst: urea-Degussa P-25 $TiO_2$ and titania-colloid methods for the N-doped $TiO_2$; and titanium isopropoxid- and tetraisopropoxide-thiourea methods for the S-doped $TiO_2$. Furthermore, two coating methods (EDTA- and acetylacetone-dissolving methods) were tested for both the N-doped and S-doped $TiO_2$. The two coating methods exhibited different photocatalytic degradation efficiency for the N-doped photocatalysts, whereas they did not exhibit any difference for the S-doped photocatalysts. In addition, the two doping processes showed different photocatalytic degradation efficiency for both the S-doped and N-doped photocatalysts. For both the N-doped and S-doped $TiO_2$, the photocatalytic oxidation (PCO) efficiency increased as the hydraulic diameter (HD) decreased. The degradation efficiency determined via a PCO system with visible-light induced $TiO_2$ was lower than that with UV-light induced unmodified $TiO_2$, which was obtained from previous studies. Nevertheless, it is noteworthy that for the photocatalytic annular reactor with the HD of 0.5 cm, PCO efficiency increased up to 52% for the N-doped $TiO_2$ and 60% for the S-doped $TiO_2$. Consequently, when combined with the advantage of visible light use over UV light use, it is suggested that with appropriate HD conditions, the visible-light-assisted photocatalytic systems can also become an important tool for improving IAQ.

• Applied Biological Chemistry
• /
• v.41 no.6
• /
• pp.471-476
• /
• 1998

A synthesis and the screening of new 2-iminothiazolines (IV) of which structures are modified based on a lead compound, thiazoline for development of new agrochemical fungicide were described. Bromination of acetoacetanilides (I) which were prepared by the reaction of diketene with anilines gave the corresponding ${\gamma}-bromoacetoactanilide\;(II)$. Treatment of II with N-phenyl-N'-methyl thiourea (III) afforded IV, structure of which was confirmed by various spectroscopic methods. Antifungal activity of the new IV was tested against six kinds of typical plant diseases (in vivo). The IV with aromatic substituents showed remarkable activity against the Pyricuraria oryzae at 250 ppm in primary screening. The candidates with control value over 90% in primary screening were selected and further tested for second screening at lower concentrations. The IV which has an electron-withdrawing substituent such as halogen, especially fluorine in aryl group showed a higher activity as compared to those with electron-donating group and meta substituent was for optimal position.

• The Korean Journal of Pesticide Science
• /
• v.10 no.2
• /
• pp.69-75
• /
• 2006

For the development of new agrochemical fungicide 3-amino-2-phenylimino-1,3-thiazolines 2 were designed through the molecular modification based on isostere concept of 3-methyl-2-phenylimino-1,3-thiazolines 1 which showed antifungal activity against rice blast. All the compounds 2 were fit Lipinski rule and they had higher solubility in water than that of 1 by virtual calculation. We constructed 195 kinds of focused library of 3-amino-2-phenylimino-1,3-thiazolines through 6H-[1,3,4]thiadiazines (195 compounds) which synthesized from the reaction of thiourea 4 with $\gamma$-chloroacetoacetanilides 5.

• The Korean Journal of Physiology and Pharmacology
• /
• v.13 no.1
• /
• pp.15-22
• /
• 2009

This study was undertaken to elucidate the underlying mechanisms of ATP depletion-induced membrane transport dysfunction and cell death in renal proximal tubular cells. ATP depletion was induced by incubating cells with 2.5 mM potassium cyanide(KCN)/0.1 mM iodoacetic acid(IAA), and membrane transport function and cell viability were evaluated by measuring $Na^+$-dependent phosphate uptake and trypan blue exclusion, respectively. ATP depletion resulted in a decrease in $Na^+$-dependent phosphate uptake and cell viability in a time-dependent manner. ATP depletion inhibited $Na^+$-dependent phosphate uptake in cells, when treated with 2 mM ouabain, a $Na^+$ pump-specific inhibitor, suggesting that ATP depletion impairs membrane transport functional integrity. Alterations in $Na^+$-dependent phosphate uptake and cell viability induced by ATP depletion were prevented by the hydrogen peroxide scavenger such as catalase and the hydroxyl radical scavengers(dimethylthiourea and thiourea), and amino acids(glycine and alanine). ATP depletion caused arachidonic acid release and increased mRNA levels of cytosolic phospholipase $A_2(cPLA_2)$. The ATP depletion-dependent arachidonic acid release was inhibited by $cPLA_2$ specific inhibitor $AACOCF_3$. ATP depletion-induced alterations in $Na^+$-dependent phosphate uptake and cell viability were prevented by $AACOCF_3$. Inhibition of $Na^+$-dependent phosphate uptake by ATP depletion was prevented by antipain and leupetin, serine/cysteine protease inhibitors, whereas ATP depletion-induced cell death was not altered by these agents. These results indicate that ATP depletion-induced alterations in membrane transport function and cell viability are due to reactive oxygen species generation and $cPLA_2$ activation in renal proximal tubular cells. In addition, the present data suggest that serine/cysteine proteases play an important role in membrane transport dysfunction, but not cell death, induced by ATP depletion.

• International Journal of Oral Biology
• /
• v.37 no.2
• /
• pp.63-68
• /
• 2012

It has been documented that SPA0355 exerts antiinflammatory effects via the inhibition of nuclear factor-kappaB activation. In present study, we investigated the inhibitory effects of SPA0355 on periodontitis in an animal model. Periodontitis was induced by ligation of the cervix of the 1st molar in the left mandible in rats. After ligature, the rats were randomly divided into four groups and topically applied with SPA0355 (0.5, 1, and 2%) or the vehicle alone once daily for 10 days. Body weight and food intake were measured daily throughout the experimental period. At day 10 post-ligature, the infiltration of inflammatory cells and distance of the cementoenamel junction (CEJ) to the alveolar bone crest (ABC) in the distal area of ligatured tooth were estimated histopathologically. No changes in body weight or food intake were found between the control and SPA0355 groups. The degree of inflammation was decreased in all three SPA0355 application groups. A decrease CEJ-ABC distance was observed in the 0.5% and 1% SPA0355 groups. These results indicate that SPA0355 inhibits the infiltration of inflammatory cells and alveolar bone resorption and suggests its potential as a therapeutic agent for periodontitis.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.30 no.10
• /
• pp.625-630
• /
• 2017

ZnS was chemically deposited as a buffer layer alternative to CdS, for use as a Cd-free buffer layer in $Cu(In_{1-x}Ga_x)Se_2$ (CIGS) solar cells. The deposition of a thin film of ZnS was carried out by chemical bath deposition, following which the structural and optical properties of the ZnS layer were studied. For the experiments, zinc sulfate hepta-hydrate ($ZnSO_4{\cdot}7H_2O$), thiourea ($SC(NH_2)_2$), and ammonia ($NH_4OH$) were used as the reacting agents. The mole concentrations of $ZnSO_4$ and $SC(NH_2)_2$ were fixed at 0.03 M and 0.8 M, respectively, while that of ammonia, which acts as a complexing agent, was varied from 0.3 M to 3.5 M. By varying the mole concentration of ammonia, optimal values for parameters like optical transmission, deposition rate, and surface morphology were determined. For the fixed mole concentrations of $0.03M\;ZnSO_4{\cdot}7H_2O$ and $0.8M\;SC(NH_2)_2$, it was established that 3.0 M of ammonia could provide optimal values of the deposition rate (5.5 nm/min), average optical transmittance (81%), and energy band gap (3.81 eV), rendering the chemically deposited ZnS suitable for use as a Cd-free buffer layer in CIGS solar cells.

• Journal of Electrochemical Science and Technology
• /
• v.7 no.2
• /
• pp.132-138
• /
• 2016

In this study, we report the fabrication of functional complex fibers, which have been studied widely globally for numerous applications. Here, we fabricated conductive complex fibers with antibacterial properties by coating metal ions on the surface of plastic (polypropylene) fibers using the electroless and electrochemical deposition. First, we polished the polypropylene melt-blown fiber surface and obtained an absorbing Pd seed layer on its surface. Subsequently, we substituted the Pd with Cu. Bis-3-sulfopropyl-disulfide disodium salt (SPS), polyethylene glycol (PEG), and ethylene thiourea (ETU) were used as the brightener, carrier, and leveler, respectively for the electroplating. We focused on most achieving the stable plating condition to remove dendrites, which are normally during electroplating metals so that smooth layer is formed on the fiber surface. The higher the amount of SPS, the higher was the extent of irregular plate-like growth. Many irregularities in the form of round spheres were observed with increase in the amount of PEG and ETU. Hence, when the additives were used separately, a uniform coating could not be obtained. A stable coating was obtained when the three additives were combined and a uniform 5-9 μm thick copper layer with a stable morphology could be obtained around the fiber. We believe that our results can be applied widely to obtain conductive fibers with antibacterial properties and are useful in aiding research on conductive lightweight composite fibers for application in information technology and robotics.

• Analytical Science and Technology
• /
• v.13 no.2
• /
• pp.151-157
• /
• 2000

Effects of acids and pre-reductants in the analysis of arsenic have been studied by hydride generation-atomic absorption spectrometry. The analytical results were strongly dependent on the acid concentrations. All the pre-reductants was very effective to observe the arsenic signal at strong acid concentrations (3 M-5 M). However, at the low acid condition (${\leq}0.1M$), L-cysteine only showed a reasonable effect on the absorption signal. When the sample was treated with the nitric acid, absorption signal was unstable and was also decreased. Although interference effects were observed from metal ions such as $Cr^{6+}$ and $Br^{5+}$ at low acid condition, the generation of hydride could be increased by the strong acid condition.