• Korean Journal of Agricultural and Forest Meteorology
• /
• v.7 no.4
• /
• pp.282-288
• /
• 2005

This study was carried out to estimate aboveground carbon contents associated with four years of thinning treatment of Quercus acuta stands in Wando Arboretum, Jeonnam. Stand thinning was conducted over four years using stand table projection for each thinning treatment. Ten sample trees were cut in the surveyed area. Estimation of aboveground biomass was made using the equation model $W=aD+bD^2$ where W is oven dry weight and D is DBH in cm. The total aboveground biomass for each intensity treatment area was : control (148.4 ton/ha), light (105.6 ton/ha), moderate (68.7 ton/ha) and heavy (39.1 ton/ha). Aboveground carbon storage for Quercus acuta stands was found by multiplying dry weigh t (ton/ha) by 0.5. Carbon storage and increment after four years was: control (74.2 tonC/ha), light (52.8 tonC/ha), moderate (34.3 tonC/ha) and heavy thinning intensity area (38.2tonC/ha).

• Journal of the Korea Furniture Society
• /
• v.20 no.4
• /
• pp.281-289
• /
• 2009

This research examined the technical feasibility of composite that had two layers of fiberglass reinforcement to enhance the load carrying capacity of lumber. Specimens were prepared from standard lumber made of thinning crop trees such as Larix kaempferi, Pinus koraiensis, and P. rigida. Results indicated that bending properties, hardness, and wood screw withdrawal load of low density lumber from the P. koraiensis increased as the number of layers of fiberglass reinforcement increased. Composite produced by VARTM method showed the MOE increased in all specimens, while the MOR differed on the location, whether the 2-layers of FRP is put on tensile zone or compressive zone. The MOR of high density lumber from Larix kaempferi and P. rigida decreased when they placed into tensile zone, but low density lumber from P. koraiensis increased in same location. The bending toughness only increased high density lumber of Larix kaempferi as the number of layers of fiberglass reinforcement increased. The technique developed by this study may increase an opportunity to use small diameter log with low density for commercial purposes.

• Journal of the Korean Wood Science and Technology
• /
• v.35 no.3
• /
• pp.29-35
• /
• 2007

This research investigates the composites reinforced with fiberglass to wood and commercial particleboard using VARTM process to enhance the mechanical properties. Specimens were prepared from lumbers from thinning crop-trees and commercial particleboard. Matched specimen were reinforced on both sides with one layer of unidirectional fiberglass roving. Fiberglass reinforcement to wood and particleboard using VARTM process improved mechanical properties.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.21 no.5
• /
• pp.81-96
• /
• 2018

The purpose of this study is to analyze the characteristics of vegetation changes and structures in the buffer green zone of Sihwa Industrial Complex and propose environmental, ecological and multi-functional vegetation management directions. The density of the Pinus thunbergii decreased from $23.1trees/100m^2$ in 2006 to $9.6trees/100m^2$ in 2017 due to the influence of thinning works. Its green volume increased from $0.97m^3/m^2$ to $2.02m^3/m^2$, contributing to the improvement of the atmospheric environment and promotion of biodiversity. The density of deciduous broad-leaved trees at the top maintained at $18{\sim}21trees/100m^2$. In the areas where the understory vegetation was removed, Pueraria lobata spread as an invasive plant and disturbed the forest. In the areas where the understory vegetation was not removed, various native plant species including the Rhus javanica and Celtis sinensis were introduced and contributed to the development of a forest in a multiple structure. There was a concern with the spread of Robinia pseudoacacia which developed into understory vegetation in Pinus thunbergii forest and some canopy forest. The study proposed vegetation management directions for the back, top and front side according to the physical structure of large-scale buffer green zone formed in a long linear form and the usage characteristics of adjacent land.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.3
• /
• pp.1715-1724
• /
• 2015

This study assessed the long term structure of forest age groups and the possibility of a domestic wood supply based on the wood industry buildup master plan. Wood is assumed to be supplied by main cutting, renewal, cutting damaged trees and thinning. The cohort equation was applied to identify the dynamic changes in forest area according to the age groups. The sixth age group, which composed of only 7.7% in 2010, is expected to comprise 73% of the total production land. The area distributions of the other age groups are expected to be between 5.3 - 5.6%. Consequently, the production volume from main cutting accounts for approximately 93 - 95% of the total production. The production volume from thinning, which depends on the area of the second and third age groups, will be decreased gradually. When the volume of domestic timber supply was compared with the timber demand from a previous study, the self-sufficiency of timber demand will be approximately 83% in 2050.

• Journal of Korea Foresty Energy
• /
• v.20 no.2
• /
• pp.46-57
• /
• 2001

This study was conducted to provide tending operation information for the effective management in unmanaged artificial forests of Pinus densiflora for. erecta, Pinus rigida, and larix leptolepis, based on the study of the comparison of tree growth pattern by residual stand density after thinning practices. Followings are summarized results of this study. 1. The diameter growth of residual trees was increased as residual stand density decreased by thinning practices in the stands of Pinus densiflora for. erecta, and Pinus rigida, and subcompartment (Ga) and (Na) of Larix leptolepis. The statistical analysis noted that the tree growth was significantly different by the residual stand density. 2. The height growth did not show corresponding results by stand density treatment pattern, which indicated that the height growth was not directly influenced by residual stand density, but by site quality of the stand. 3. The diameter increment for the last six years was proportionately increased in larger diameter classes and less dense stands.

• Journal of Korean Society of Forest Science
• /
• v.88 no.3
• /
• pp.320-326
• /
• 1999

In this study, 15 survival functions in integral and difference forms for forest plantation were derived based on assumptions for the number of surviving trees and the differential forms of the mortality rate model. Then, performance of the models was evaluated by fitting to remeasurement data of unthinned white pine(Pinus strobes) forest plantation. As a result, three equations associated with a power function of age, $t^{\beta}$, are somewhat more suitable for describing the effect of self-thinning over time. On the other hand, a general survival function for Japanese larch(Larix leptolepts) forest plantation was derived in order to exam the effect of site quality on self-thinning procedures. The results indicate that the $N_{min}$ is negatively correlated with site index and, even though the same initial stand density was assumed, the survival function curves differ in shapes associated with site index values.

• Journal of Korean Society of Forest Science
• /
• v.105 no.3
• /
• pp.275-283
• /
• 2016

The objective of this study was to examine carbon dynamics with biomass, soil $CO_2$ efflux, litter and root decomposition after tree density control in young Pinus densiflora stands. The stands were established with 50% thinning, clear-cut, and control stands with three pseudo-replicated plots and a bare soil plot in 8-year-old Pinus densiflora nursery field. Monthly measurements were conducted from March 2012 to February 2014 and aboveground biomass and coarse-roots were estimated by derived allometric equations. Average diameter growth at root collar in control and thinned was 0.89 cm and 1.48 cm per year, respectively, and the diameter growth of control stand was significantly higher than that of thinned stands (p<0.05). Total biomass was estimated to 5.17, $4.85kg\;C\;m^{-2}$ per year in control and thinned, respectively. Annual soil $CO_2$ efflux in control, thinned, clear cut, and bare soil was 3.71, 3.90, 4.17, $4.56kg\;CO_2\;m^{-2}\;yr^{-1}$, respectively and removing trees significantly increased soil $CO_2$ efflux (p<0.05). Net Ecosystem Production (NEP) was 1.57, 1.36, -0.67, $-1.25kg\;C\;m^{-2}\;yr^{-1}$ in control, thinned, clear cut and bare soil in the young Pinus densiflora stands. NEP was significantly decreased by removing trees. Thinning increased diameter at root collar and carbon of individual tree and recovered 86% of carbon removed by thinning after one-year. In addition, soil $CO_2$ efflux increased and NEP increased by thinning. Results of this study, tree density control such as thinning increased the carbon storage and growth of the young Pinus densiflora stands.

• Journal of Korean Society of Forest Science
• /
• v.104 no.2
• /
• pp.221-229
• /
• 2015

The purpose of study was to broaden our knowledge on the productivity and cost of thinning operations which has become increasingly practiced in Korea. The thinning operations were conducted in a 40-year old larch (Larix leptolepis) stand, including chainsaw felling and processing at the stump, followed by yarding tree-length logs using a Koller K301-4 tower yarder. The logs were further processed and sorted into 1.8 m and 3.6 m log piles at the landing. We used a standard time study method to evaluate key variables that affect the productivity of thinning operations. The total stump-to-pile operational cost was $41,707won/m^3$. The highest cost activity was the yarding phase which cost $20,083won/m^3$ (48.2% of the total cost), followed by the costs of processing treelength materials into marketable log lengths ($12,143won/m^3$; 29.1%), and then by the costs of sorting/piling the processed logs ($5,039won/m^3$; 12.1%). It was interesting to see that felling and processing trees at the stump had low costs at $1,315won/m^3$ (3.2%) and $3,127won/m^3$ (7.5%), respectively. We used the detailed time study data to develop regression equations which were to predict yarding productivity. Our analysis showed that harvesting system cost was highly sensitive to the number of logs, yarding distance and lateral distance per turn, respectively.

• Korean Journal of Agricultural Science
• /
• v.10 no.1
• /
• pp.74-83
• /
• 1983

In order to examine the relationship of fruit abscission and ethylene evolution in 'Jojuro' and 'Imamuraaki' pear trees, the thinning chemicals, ${\beta}$-naphthalene acetic acid (NAA), O, O-dimethyl-O-(3-methyl-4 nitrophenyl) posphorothioate (MEP), 1-naphthyl N-methyl carbamate (carbaryl), and 2-chloroethyl phosphonic acid (ethephon) were applied. Concurrently the effect of calcium acetate on the control of fruit abscission were examined when calcium acetate was added to ethephon and carbaryl. 1. All the applied chemicals (MEP, NAA, carbaryl and ethephon) was effective to abscise fruits in 'Jojuro', and MEP and carbaryl in 'Imamuraaki's. 2. The application of ethephon increased the ethylene evolution but other chemicals did not increase it. 3. There were no significant differences in total sugar contents of fruits by MEP, NAA, carbaryl and ethephon treatments. 4. When the calcium acetate was added to the ethephon and carbaryl, the thinning effects were offsetted. 5. The rate of defoliation due to ethephon treatment was controlled by addition of calcium acetate at 0.1~0.25 M. It was clarified that fruit abscission induced by thinning chemicals except ethephon was not directly related to ethylene production and that degree of fruit thinning can be regulated by addition of calcium acetate to thinning chemicals.