• Journal of Korean Clinical Health Science
• /
• v.6 no.1
• /
• pp.1089-1096
• /
• 2018

Purpose: To investigate the corneal thickness and anterior chamber depth (ACD) of eyes with Keratoconus in the Korean population with the Pentacam. Methods: The subjects consisted of 84 eyes from Keratoconic adults aged 7-59 years during 2010. The thinnest area, apex zone, and pupil centre of the corneal thickness were measured using the Pentacam pachymetry. ACD value was also measured with Pentacam. Results: There was a statistically significant relationship between thickness of the cornea at the apex area and the pupil centre (p=0.0001). However, there was no statistical difference (p>0.5) in the mean thickness of thinnest area, apex zone, pupil centre of cornea between right eye and left eye. Also, correlation between ACD and corneal thickness in all subjects had no statistical differences (p>0.05) in all subjects. Conclusion: These results suggested that the regional thickness of cornea and ACD with Pentacam can provide correct and useful diagnostic information of the morphology of Keratoconus for the RGP contact lens and diagnosis of abnormal corneal refraction surgery.

• Archives of Plastic Surgery
• /
• v.41 no.2
• /
• pp.133-139
• /
• 2014

Background Various shapes and designs of the gluteal artery perforator flap have been used for treating sacral pressure sores and reconstructing breasts. To establish the ideal fasciocutaneous flap design for use in the gluteal area, the soft tissue thickness distribution was measured. Methods Twenty-one buttocks of adult Korean cadavers were analyzed through rectangular subfascial dissection. Each buttock was divided horizontally into 10 sections and vertically into 10 sections, and then, the thickness at the corners of the sections was measured. For the sake of comparison and statistical verification with living bodies, computed tomography (CT) images of 120 buttocks of patients were randomly selected. Five horizontal sections and 4 vertical sections were made, and the thickness at each corner was recorded. Results According to the dissection and the CT images, the area with the thinnest soft tissues in the buttock was around the posterior superior iliac spine, close to the sacral area. The thickest area was the superolateral area of the buttock, which was 3.24 times and 2.15 times thicker than the thinnest area in the studies on cadaver anatomy and the CT images, respectively. Conclusions The thickness of the soft tissues in the buttocks differed by area. The superolateral area had the thickest soft tissues, and the superomedial area had the thinnest. This study includes information on the distribution of the thickness of the gluteal soft tissues of Koreans. The outcome of this study may contribute to the design of effective local flaps for pressure sore reconstruction and free flaps for breast reconstruction.

• Proceeding of EDISON Challenge
• /
• 2016.03a
• /
• pp.373-376
• /
• 2016

Transition metal dichalcogenides (TMDs) such as $MoS_2$ is the thinnest semiconductor, exhibits promising prospects in the applications of optoelectronics, catalysis and hydrogen storage devices. Uniform and high quality $MoS_2$ is highly desirable in large area for its applications on commercial scale and fundamental research. Many experimental techniques i.e CVD have been developed to successfully synthesis $MoS_2$ on large scale, here in this work atomistic detail to understand the growth mechanism is addressed which was greatly overlooked. Here based on first principles calculation we found that polarity of seeding promter (crystal violet considerd in this work) controls the growth mechanism. It is also found that molybdenum destroys the precursor while sulfur adsorption with precursor is favorable.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.41 no.2
• /
• pp.352-361
• /
• 2017

This study prepared 5 retroreflective fabrics of glass beads and colors of silver, gold and purple in order to characterize morphologies, luminance and illuminance properties. Retroreflective fabrics were prepared according to division and area by Samp.1 (Division 2, area $80cm^2$), Samp.2 (Division 2, area $60cm^2$), Samp.3(Division 3, area $60cm^2$), Samp.4 (Division 5, area $50cm^2$), and Samp.5 (Division 1, area $100cm^2$). The results of the morphologies indicate that the back side of retroreflective fabrics was the 3M-Sv, RF-Sv. The RF-Gd of the fabrics were woven fabrics and the SRF-Sv, SRF-Pp was knitting. The largest glass bead size was 3M-Sv and the smallest was SRF-Pp. RF-Sv was the thinnest and SRF-Sv, SRF-Pp were the thickest. The results of luminance properties indicated a tendency to decrease slightly as the number of divisions and area increased, except for Samp.2 to Samp.3. The result of illuminance properties tend to increase as the number of LED becomes greater than the number of divisions in the same area; in addition, the higher the luminance as a whole increases. The results show that it is preferable to use a silver-colored RF-Sv which has the highest luminance and physical properties when a retroreflective fabric is applied to clothes.

• Imaging Science in Dentistry
• /
• v.43 no.4
• /
• pp.261-266
• /
• 2013

Purpose: This study was performed to investigate the bone thickness of the infrazygomatic crest area by computed tomography (CT) for placement of a miniplate as skeletal anchorage for maxillary protraction in skeletal Class III children. Materials and Methods: CT images of skeletal Class III children (7 boys, 9 girls, mean age: 11.4 years) were taken parallel to the Frankfurt horizontal plane. The bone thickness of the infrazygomatic crest area was measured at 35 locations on the right and left sides, perpendicular to the bone surface. Results: The bone was thickest (5.0 mm) in the upper zygomatic bone and thinnest (1.1 mm) in the anterior wall of the maxillary sinus. Generally, there was a tendency for the bone to be thicker at the superior and lateral area of the zygomatic process of the maxilla. There was no clinically significant difference in bone thickness between the right and left sides; however, it was thicker in male than in female subjects. Conclusion: In the infrazygomatic crest area, the superior and lateral area of the zygomatic process of the maxilla had the most appropriate thickness for placement of a miniplate in growing skeletal Class III children with a retruded maxilla.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.14 no.1_2
• /
• pp.135-142
• /
• 1992

This study was performed to define the anatomical position of the mandibular canal and the findings during the sagittal split ramus osteotomy of the mandible. The mandibles of 20 adult Korean were used. The dimension of mandibular canal from the mandibular foramen to the 1st molar was measured at 4 specific coronal-sectional location by CT scan. The results were as follows ; 1. The distance from the mandibular canal to the medial aspect of the buccal cortical plate was greatest($4.5{\pm}1.1mm$) at 2nd molar area and was not significantly greater than at any other section. 2. Buccal cortex was thickest($3.8{\pm}0.9mm$) at 2nd molar and thinnest ($2.5{\pm}0.3mm$) mandibular foramen um 3. The distance from the mandibular canal to the medial aspect of the lingual cortical plate was not significant at any sections. 4. The distance from the mandible canal to the inferior border of mandible was greatest at the mandibular foramen($20.7{\pm}3.9mm$). The canal was located more closely to the inferior border at 1st, 2nd molar area 5. The diameter of the mandibular canal was between $2.5{\pm}0.3mm$ and $2.8{\pm}0.6mm$. 6. The total mandibular thickness was greatest($21.1{\pm}2.6mm$) at 2nd molar area and narrowest($17.2{\pm}3.2mm$) at mandibular foramen area.

• The korean journal of orthodontics
• /
• v.41 no.5
• /
• pp.312-323
• /
• 2011

Objective: This study compared the bone thickness of the palate between lateral cephalogram and 3D model measurements. Methods: The subjects consisted of 30 adults (15 men,15 women) with a normal skeletal pattern and occlusion. The CT images were transformed to a 3D model, and were compared with the cephalometric image. Descriptive statistics for each variable were calculated. Results: In the 3D CT model, the mid-palatal area was the thickest part. It became thinner as the palate tapered laterally. In the male group, the thinnest portion was positioned 6 mm away from the mid-palate, while in the female group the thinnest portion was 8mm away from the mid-palate. Correlation analysis between the lateral cephalometric and 3D CT model revealed a significant correlation except in the mid palatal area and the area 2 mm lateral to the mid-palate in men, whereas there was a significant relationship in every area in the women. In both men and women, the highest correlation appeared in the area 8 mm lateral to the mid palate. Conclusions: Using regression analysis, an actual prediction of the bone thickness between the measured bone thickness of the lateral cephalometric radiograph and 3D model was made. This will provide useful information for mini-implant length selection when inserting into the palate.

• The korean journal of orthodontics
• /
• v.42 no.6
• /
• pp.291-296
• /
• 2012

Objective: The purposes of this study were to measure the palatal soft tissue thickness at popular placement sites of temporary anchorage devices (TADs) by cone-beam computed tomography (CBCT) and evaluate the age, gender, and positional differences in this parameter. Methods: The study sample consisted of 23 children (10 boys and 13 girls; mean age, $10.87{\pm}1.24$ years; range, 6.7 to 12.6 years) and 27 adults (14 men and 13 women; mean age, $21.35{\pm}1.14$ years; range, 20.0 to 23.8 years). Nine mediolateral and nine anteroposterior intersecting reference lines were drawn on CBCT scans of the 50 subjects, and the resultant measurement areas were designated according to their mediolateral (i.e., lateral, medial, and sutural) and anteroposterior (i.e., anterior, middle, and posterior) positions. Repeated-measures analysis of variance was performed to analyze intragroup and intergroup differences. Results: No significant age and gender differences were found (p = 0.309 and 0.124, respectively). Further, no significant anteroposterior change was observed (p = 0.350). However, the lateral area presented the thickest soft tissue whereas the sutural area had the thinnest soft tissue (p < 0.001). Conclusions: Clinical selection of the placement sites of TADs should be guided by knowledge of the positional variations in the palatal soft tissue thickness in addition to other contributing factors of TAD stability.

• Journal of the Korean Geosynthetics Society
• /
• v.8 no.3
• /
• pp.35-44
• /
• 2009

The purpose of this study was to prevent spreading of contaminants from movement of underground water by creating a barrier using artificial freezing method on a soil contaminated by oils and various NAPLs. Specimens with 80% and 90% degrees of saturation were prepared to form freezing barrier using artificial freezing method. With increasing freezing time of freezing barrier, barrier was formed faster in the specimen with 90% degree of saturation by about an hour compared to the specimen with 80% degree of saturation. In addition, thinnest thickness of frozen barrier in both specimens was 50mm after 12 hours of freezing time, showing expansion of freezing area with time. The results of this study can be applied to barrier in waste reclamation sites and contaminated regions or to flow control of contaminants.

• Journal of agriculture & life science
• /
• v.45 no.4
• /
• pp.95-103
• /
• 2011

Ninety five Hanwoo steers averaging 226kg of body weight were used to investigate the effect of dietary type on feed efficiency, carcass characteristics and economical analysis in Hanwoo feeding over 22 months. Treatments were composed of commercial formula feed (formula feed), TMR and Fermented-TMR (F-TMR). Intakes of dry matter and TDN were greater in the F-TMR than the other treatments during each growing and fattening phase (p<0.05). Although daily body gain of the F-TMR was lowest during the growing phase, but was 48% greater than those of other treatment during the finishing phase (p<0.05). Feed efficiency of the F-TMR was maintained constantly during whole growing and fattening phases. Carcass weight and rib-eye area of the F-TMR were greatest (p<0.05) among treatments. However, meat yield index and the rate of grade A in meat yield were highest in the formula feed having the thinnest back fat. Marbling score was hugely (p<0.05) increased when steers fed F-TMR, and therateofgrade 1+andoverinmeatqualitywas96%intheF-TMR. Although feed cost in the F-TMR was increased by 40% compare to the formula feed, but net income was increased by 29% due to improvement of meat quality and body gain.