• Bulletin of the Korean Chemical Society
• /
• v.27 no.10
• /
• pp.1562-1566
• /
• 2006

Mesoporous silica films with three different pore sizes were prepared by using cationic surfactant, non-ionic surfactant, or triblock copolymer as structure directing agents with tetramethylorthosilicate as silica source in order to control the pore size and wall thickness. They were synthesized by an evaporation-induced self-assembly process and spin-coated on Si wafer. Mesoporous silica films with three different pore sizes of 2.9, 4.6, and 6.6 nm and wall thickness ranging from $\sim$1 to $\sim$3 nm were prepared by using three different surfactants. These materials were optically transparent mesoporous silica films and crack free when thickness was less than 1 m m. The photoluminescence spectra found in the visible range were peaked at higher energy for smaller pore and thinner wall sized materials, consistent with the quantum confinement effect within the nano-sized walls of the silica pores.

• Journal of the Korean Ceramic Society
• /
• v.36 no.10
• /
• pp.1035-1039
• /
• 1999

Ferroelectric properties and reliability characteristics of(111) and (100) preferentially oriented tetragonal Pb(Zr0.2Ti0.8)O3 (PZT) thin film capacitors have been investigated as a function of the top electrode thickness. The (111) preferentially oriented film exhibits 180$^{\circ}$domain switching process with better squareness of hysterisis loop and abrupt change of small singal capacitance-voltage comparing to the (100) preferentially oriented film having 90$^{\circ}$ domain switching process. The domain swithcing process of tetragonal phase PZT is different from that of rhobohedral phase. The film with thinner top electrode shows less initial switching polarization due to less compressive stress but it exhibits better endurance characteristics due to enhancing partial switching region.

• Journal of Ecology and Environment
• /
• v.43 no.2
• /
• pp.98-103
• /
• 2019

We compared the functional traits of leaf blades and culms of common reed (Phragmites australis) in four habitat types of distinguished environments such as temperature, precipitation, water characteristics, and indices related to biomass production (montane fen, MF; riparian marsh, RM; lagoon, LG; and salt marsh, SM). We also examined the relationships between the functional traits within and among populations. Four populations showed remarkable differences in the functional traits of leaf blades and culms. MF and RM had relatively tall (> 300 cm) and thick (> 8 mm) culms bearing long leaf blades (> 40 cm), whereas LG and SM had relatively shorter and thinner culms bearing shorter leaf blades than MF and RM. Some relationships between the functional traits of leaf blades and culms showed negative or not significant correlations within the population, whereas most of the relationships between the functional traits showed positive correlations particularly when all the data from four populations was included into the correlation analysis.

• Journal of electromagnetic engineering and science
• /
• v.7 no.1
• /
• pp.47-52
• /
• 2007

We investigated the effects of substrate, metal-line, and surface material on the performance of radio frequency identification(RFID) tag antenna using a tag antenna with a meander line radiator and T-matching network. The results showed that readability of the tag antenna with a thin high-loss substrate could be increased so that it was similar to that of a low-loss substrate if the substrate was very thin. The readability of the tag antenna decreased significantly when the metal line was thinner than the skin depth. The readability of the tag also decreased drastically when the tag was attached to high-permittivity high-loss target objects.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.4 no.1
• /
• pp.42-45
• /
• 1994

Deposition of silicon on pretreated sapphire and glass substrates has been investigated by the solution growth method at low temperatures. An average 14 $\mu\textrm{m}$ thickness of silicon was grown over a large area on sapphire substrate originally coated with a much thinner silicon layer [0.5 $\mu\textrm{m}$ (100) Si/(1102) sapphire)] at low temperatures from $380~460^{\cire}C$. Successful results were obtained from surface treated glass substrates in the temperatures range from $420~520^{\circ}C$.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2012.11a
• /
• pp.11-12
• /
• 2012

This study investigates the temperature rise of reinforcement bars located in the middle of the form (for reinforcement concrete) during hot weather condition. The temperature was measured for three consecutive days before placing concrete. Test results showed that the temperature started to increase at 7:00 AM before sun rised, and peaked at around 2:00 PM. It was found that the thinner the diameter of a reinforcement bar, the higher is the speed of temperature rise and drop of the bar. The peak level of temperature for D13, D19, D25 and D32 was 54.4℃, 55.2℃, 56.4℃ and 60.2℃, respectively.

• Fashion & Textile Research Journal
• /
• v.2 no.4
• /
• pp.325-330
• /
• 2000

The purpose of this study was to investigate if there were any differences between fashion models and female college students' body cathexis and to examine the perception of their body form and satisfaction of clothing fit according to height, weight and body type. For this study 378 people, including 113 fashion models and 265 female college students were analyzed. Means, t-test and ${\chi}^2$-test were used in data analyses. Significant differences were found between fashion models and female college students' body cathexis. For instance fashion models were more positive about their bodies especially concerning height. Fashion Models and female college students differed significantly in perception of their body form according to weight and body type. Perhaps they have another criteria. Fashion Models and female college students differed significantly in satisfaction of clothing fit according to weight and body type. The taller and Thinner, The higher satisfaction of Clothing fit.

• Journal of Mechanical Science and Technology
• /
• v.20 no.12
• /
• pp.2168-2177
• /
• 2006

The purpose of this investigation was to determine the specific fracture mechanics response of cracks that initiate at the stem-cement interface and propagate into the cement mantle. Two-dimensional finite element models of idealized stem-cement-bone cross-sections from the proximal femur were developed for this study. Two general stem types were considered; Rectangular shape and Charnley type stem designs. The FE results showed that the highest principal stress in the cement mantle for each case occurred in the upper left and lower right regions adjacent to the stem-cement interface. There was also a general decrease in maximum tensile stress with increasing cement mantle thickness for both Rectangular and Charnley-type stem designs. The cement thickness is found to be one of the important fatigue failure parameters which affect the longevity of cemented femoral components, in which the thinner cement was significantly associated with early mechanical failure for shot-time period.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.21 no.4
• /
• pp.593-600
• /
• 2012

Thixomolding of Mg-alloy is a semi-solid injection molding process utilizing thixotropic phenomenon. Using this process, higher strength, thinner wall section and tighter tolerance without porosity are obtained. It has been applied for production of near-net-shape magnesium component. To design optimal thixomolding process of Mg-alloy part, molding conditions such as slurry temperature, mold temperature and injection time should be determined properly. Selection of these parameters has been dependent upon engineers' experience and intuitiveness. In this paper, to improve mechanical properties of the thixomolded product, optimal selection of process variables such as injection velocity, barrel temperature and die temperature in the process has been studied through microstructural analysis and Taguchi method. Performance of the process is verified through experiments.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.25 no.4
• /
• pp.764-772
• /
• 2001

The purpose of this study was to examine the differences of perceived body size and actual body size between Korean and USA female college students of 18 to 26 year-old. Body measurements and survey were taken from August to September, 1998. The results are as follows: 1) There were differences between the body measurements of the Korean women and US women. Among 20 body areas, except only head length and neck circumferences, American women had bigger sizes than Korean women. 2) Compared to US females, Koreans perceived their body sizes as bigger and were more dissatisfied with their bodies than Americans. 3) Those who had thinner body sizes tended to be more satisfied with their bodies.