• Journal of Animal Science and Technology
• /
• v.45 no.3
• /
• pp.421-432
• /
• 2003

The objective of this study was to examine the effects of processing methods of corn grains on protein and starch degradability in the rumen by three ruminally cannulated dry Holstein cows. The corns for these experiments were untreated; whole corn L(density; 660 g/$\ell$), whole corn H(density; 740 g/$\ell$), and treated by four different types: Ground corn, 3.8 mm, 2.8 mm, and 1.5 mm flaked corn. The results obtained were summarized as follows: For 48 hrs, the protein degradabilities were high in order, ground corn, 1.5 mm, 2.8 mm, and 3.8 mm flaked corn(82.6, 76.5, 64.5, and 33.9%, respectively). Flaked corn grains were degraded lower than ground corn. However, as increasing the processing degree of flaking, the protein degradabilities, from 4 hrs to 48 hrs, were increased. The starch degradabilities on 48 hrs were higher in 1.5 and 2.8 mm flaked corns, ground corn, 3.8 mm flaked corn(99.1, 91.5, 89.5, and 68.9%, respectively) than whole corn L(32.0%) and whole corn H(20.5%)(P<0.05). By increasing the processing degree of flaking, the protein degradabilty between 2.8 mm and 3.8 mm was increased significantly from 68.9% to 91.5%, however, that of 1.5 mm flaked corn, processed thinner, tended to be increased slightly, but was not significantly different. From 12 hrs to 24 hrs, whole corn L was degraded little more than whole corn H in starch, was not significantly different. However, after 48 hr incubation in the rumen, whole corn L was degraded more 50% than whole corn H(P<0.05). The value of degradation parameter “a” of protein was lower in all flaked corns than in ground corn. In contrast, the value of degradation parameter “a” of starch was significantly higher in all flaked corns than in ground corn(P<0.05). It seemed that by flaking the corn grains, starch particles were gelatinized, and then, starch was degraded more rapidly, while protein was degraded more slowly. Referring to these kinds of physical characteristics of grain sources in ruminal degradabilities, it is possible to synchronize the fermentation of nitrogen and carbohydrate sources, in formulating the cattle diets.

• The Korean Journal of Nuclear Medicine
• /
• v.38 no.1
• /
• pp.74-84
• /
• 2004

Purpose: Since I-125 emits low energy (27-35 keV) radiation, thinner crystal and collimator could be employed and, hence, it is favorable to obtain high quality images. The purpose of this study was to derive the optimized parameters of I-125 SPECT using a new simulation tool, GATE (Geant4 Application for Tomographic Emission). Materials and Methods: To validate the simulation method, gamma camera developed by Weisenberger et al. was modeled. Nal(T1) plate crystal was used and its thickness was determined by calculating detection efficiency. Spatial resolution and sensitivity curves were estimated by changing variable parameters for parallel-hole and pinhole collimator. Peformances of I-125 SPECT equipped with the optimal collimator were also estimated. Results: in the validation study, simulations were found to agree well with experimental measurements in spatial resolution (4%) and sensitivity (3%). In order to acquire 98% gamma ray detection efficiency, Nal(T1) thickness was determined to be 1 mm. Hole diameter (mm), length (mm) and shape were chosen to be 0.2:5:square and 0.5:10:hexagonal for high resolution (HR) and general purpose (GP) parallel-hole collimator, respectively. Hole diameter, channel height and acceptance angle of pinhole (PH) collimator were determined to be 0.25 mm, 0.1 mm and 90 degree. The spatial resolutions of reconstructed image of the I-125 SPECT employing HR:GP:PH were 1.2:1.7:0.8 mm. The sensitivities of HR:GP:PH were 39.7:71.9:5.5 cps/MBq. Conclusion: The optimal crystal and collimator parameters for I-125 Imaging were derived by simulation using GATE. The results indicate that excellent resolution and sensitivity imaging is feasible using I-125 SPECT.

• Journal of Animal Science and Technology
• /
• v.48 no.2
• /
• pp.255-268
• /
• 2006

Twenty four Hanwoo cull cows were assigned to 2 groups, control and melengerol acetate(MGA)+selenium supplement containing vitamin E(SeE), based on the parity(6.5±1.7 birth) and body weight (493.17±55.61kg), and the experiment was conducted to establish the reasonable fattening method of cull cows for 240 days. Average daily body gains during 240 days were 0.51kg and 0.63kg in control and MGA+SeE, respectively(P<0.10). DDMI/ADG of MGA+SeE group improved compared to control group(P<0.05). Therefore, supplementation of MGA+SeE in concentrates may accelerate both of the growth rate and feed efficiency in Hanwoo cull cows. MQI from MGA+SeE was more developed based on the larger rib-eye area and thinner backfat thickness in carcass than that from control. Marbling score for MGA+SeE tended to increase compared to control. Dietary Se supplementation significantly affected muscle Se concentration in longissimus dorsi meat of MGA+SeE group(P<0.05). Similar results to Se were obtained from α-Tocoperol concentration. During 7 days of simulated retail display, accumulations of thiobarbituric acid reactive substances(TBARS) concentration in beef was greater(P<0.05) in control than in supplemented cows. These results supported the hypothesis that supplementation of MGA+SeE improve the growth performance and carcass grade both by the growth stimulating effect of MGA+SeE and by preventing the oxidation of the longissimus dorsi muscle in Hanwoo cull cows.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.56 no.1
• /
• pp.8-13
• /
• 2011

This study was carried out to compare botanical characteristics, physicochemical properties related to table quality and feed values and develop a new variety among 12 developed waxy com hybrids. These materials were produced in 2008 and cultivated in 2009 at Com Breeding and Genetics Farm of Coll. of Agri. & Life Sci., Chungnam Nat'l Univ. Botanical characteristics of used waxy com hybrids showed large difference among hybrids; stem height, ear height and ear length. In physical properties, range of kernel sugar content among used hybrids appeared 16.1 to 13.0brix(%). CNU08H-15, CNU08H-35 and CNU08H-h39 among these were highly appeared as 15 above and pericarp thickness of Yeonongchal was very thick as $46.0{\mu}m$, while CNU08H-39 among hybrids showed the thinnest as $23.0{\mu}m$ compared to other hybrids. Protein content as a indicator of table quality was the highest in Ilmichal among hybrids, while that of CNU08H-39 was the lowest, while amylopectin content was the highest as 94.5%, From experimental results, Daehakchal Gold 1, CNU08H-h121 and CNU08H-39 including check Yeonyoungchal were highly evaluated as new hybrid in thinner pericarp, high amylopectin and chewiness.

• Economic and Environmental Geology
• /
• v.53 no.4
• /
• pp.413-423
• /
• 2020

Over the wide area, King Sejong Station and the nearby land are uncovered with snow and ice conditions. Therefore, the active layer on the permafrost has been formed to be much thicker than the other Antarctica region. Electrical resistivity survey of Wenner and dipole-dipole arrays was undertaken at a series of time in the freezing season at the King Sejong Station to delineate subsurface structure and to monitor active layer in permafrost terrain. Time-lapse resistivity structures are well in terms of the vegetation distribution, ground surface temperature, and snow depth. Horizontal high resistivity belt(>1826 Ωm) at very shallow depth is thickening with the lapse of time, probably caused by the freezing of the water in the pore spaces with decrease of ground temperature. Subsurface structures for the area of low snow-cover and vegetated zone area are comprised of 0~0.5 m deep high-resistive gravel-rich soil, 0.5~3 m deep low-resistive active layer, and the underlying permafrost. In contrast, the unvegetated area and high snow-buildup is characterized with high resistivities larger than approximately 2000 Ωm due to freezing of the soil throughout the year. Data interpretation and correlation schemes explored in this paper can be applied to confirm the active layer, which is expected to get thinner in additional survey during the thawing season.

• Applied Microscopy
• /
• v.41 no.3
• /
• pp.205-213
• /
• 2011

Numerous anisakids were parasitic near the digestive tract of the black rockfish, Sebastes schlegeli and some anisakids observed on the liver of the host. Anisakids in the host were identified three species (Hysterothylacium sp., Anisakis simplex, A. pegreffii) and Hysterothylacium sp. was the high occurrence of anisakid worms in the host. Hysterothylacium sp. was shorter and thinner than A. simplex. Both of anisakids observed lip, mouth, nerve ring, excretory pore and excretory duct in the anterior portion. In the mid portion, anisakids had esophagus, ventriculus and intestine and especially, Hysterothylacium sp. had intestinal ceacum and ventricular appendage. There was conical nodulose apex at the end of the posterior portion in Hysterothylacium sp. and spine in A. simplex. SEM examination revealed that there was three lip near the mouth of Hysterothylacium sp. Dorsal lip was approximately 65 ${\mu}m$ and paried lateroventral lip were approximately 60 ${\mu}m$ in the width. All lips were found double papilla (approximately 8 ${\mu}m$ in the width). The body width of the Hysterothylacium sp. and A. simplex was approximately 480 ${\mu}m$ and 900 ${\mu}m$ respectively. The hight of the lateral alae was about 7 ${\mu}m$ and width of papilla on the cornical nodulose apex was about 3.3 ${\mu}m$ in Hysterothylacium sp. The hight of spine was approximately 20 ${\mu}m$ in A. simplex. There was mainly Hysterothylacium sp. in the intestinal lumen of the host. The nematod worms were parasitic near the mucosal fold and in the submucosal. In the mucosal epidermal layer, it was increased mucous cells by the infection of the parasites.

• Horticultural Science & Technology
• /
• v.32 no.5
• /
• pp.577-583
• /
• 2014

Benzyladenine (BA, 99% purity), MaxCel$^{(R)}$ (1.9% BA), Fruitone (3.5% NAA), MaxCel$^{(R)}$ + Fruitone, a nd s imazine were applied postbloom as fruitlet thinning agents to mature 'Hongro' and 'Fuji' apple (Malus domestica Borkh.) trees. BA and MaxCel$^{(R)}$ were applied at $100mg{\cdot}L^{-1}$ a.i. while Fruitone at $0.1mg{\cdot}L^{-1}$ a.i. and simazine at $400mg{\cdot}L^{-1}$ a.i. All PGRs were applied at 8 days after full bloom (DAFB, 6 mm fruit diameter) in both cultivars, while simazine was treated twice at 7 and 14 DAFB. In 'Hongro', the number of total fruit set per flower cluster in terminal buds was 1.67, 1.84, and 1.81 in MaxCel$^{(R)}$ + F ruitone, MaxCel$^{(R)}$, and simazine applications, respectively, when compared with 2.35 of water control. These reductions in fruit set were mainly attributed to the increased ratio of defruited clusters by the thinning agents. In 'Fuji' apple, the number of total fruit set per flower cluster in terminal buds was 1.29, 1.60, and 1.76 in MaxCel$^{(R)}$ + Fruitone, Fruitone, and MaxCel$^{(R)}$, respectively, when compared with 2.56 of water control in 'Fuji' apple. The addition of Fruitone to the MaxCel$^{(R)}$ promoted the thinning efficacy in both cultivars, compared to MaxCel$^{(R)}$ only. The thinning efficacies were similarly observed with lateral flowers in both cultivars. A significant increase of fruit weight by the postbloom thinning treatments was observed only in the BA application in 'Hongro', while the effect was observed in BA and MaxCel$^{(R)}$ in 'Fuji'. While the soluble solids content increased in the BA, MaxCel$^{(R)}$ and MaxCel$^{(R)}$+Fruitone treatments in both cultivars, other fruit quality attributes were not affected by the application of post-bloom thinning agents.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.29 no.2
• /
• pp.139-145
• /
• 2002

In a primary teeth, dental caries is rapidly advanced the pulp disease, because the primary teeth have the thinner and the weaker enamel layer and the wider pulp chamber than relatively the permanent teeth. And the pulps of primary teeth are exposed during caries removal or even they are exposed by unexpected movement of the children or by trauma. For successive pulp treatment in primary teeth, it is necessary to understand completely about multiple canal morphology, variation of root canal anatomy and specific problem related to root formation and resorption of primary teeth. In upper primary molar, canal configuration of mesial root has the most variation same as upper molar. If not canal treatment is completely, most of all endodontic treatment should be failed. In a clinical case report, upper primary molars existed persistent pain or bleeding during treatment were founded the second MB canal and were performed the endodontic treatment of theirs. As a result, the upper primary molars have no symptom and good prognosis. In the examination of extracted upper primary molar, we found that 8 of 35 teeth(22.8%) in the upper primary first molars and 22 of 33 teeth(66.6%) in the upper primary second molar had the second mesiobuccal canal. It has revealed the high prevalence of two canals in mesiobuccal roots of upper primary molars. The frequency of occurrence of the second mesiobuccal canal must be taken into consideration when endodontic treatment is planned and as a possible cause of otherwise un explained failure.

• Journal of the Korean Wood Science and Technology
• /
• v.24 no.1
• /
• pp.34-47
• /
• 1996

Veneers of two nominal thicknesses, 1.5 and 2.5mm, were rotary peeled from Japanese larch (Larix leptolepis). Dahurian larch (Larix gmelinei) and Radiata pine (Pinus radiata) bolts unheated and heated in the water vat temperature of $66^{\circ}C$ by rising a final temperature at 10cm core of $60^{\circ}C$ to remain core diameter of 11.4cm. 1.5 and 2.5mm thick veneer cut from the heated Japanese larch were significantly thinner than those of the unheated bolt and 2.5mm thick veneer cut from the heated Dahurian larch were significantly thicker than that of the unheated bolt. 1.5mm thick Dahurian larch veneer and 1.5 and 2.5mm thick Radiata pine veneers showed insignificant difference between the unheated and heated bolts, respectively. Check distance on the loose side of 1.5mm thick veneer cut from the heated Radiata pine was significantly wider than that of the unheated bolt. However check distances on the loose side of 1.5 and 2.5mm thick Japanese larch and Dahurian larch veneers and 2.5mm thick Radiata pine veneers showed insignificant difference between the unheated and heated bolts. Also the depth of check on the loose side of three species showed insignificantly difference between the unheated and heated bolts. Arithmatic mean deviation($R_a$) and maximum height($R_{max}$) of the profile on the loose side of dried veneer by preheating the bolt compared with unheated bolts were different among apecies and between veneer thickness. The preheating treatment slightly affected qualities of these thin veneers such as 1.5 and 2.5mm. The yield of 2.5mm thick veneer from the heated radiata pine was significantly higher than that of the unheated bolt. However the yield of 2.5mm thick veneer for other two species and 1.5mm thick veneer for three species showed insignificant difference between the unheated and heated bolts. The yield of 2.5mm thick veneer for three species were higher than those of 1.5mm thick veneer. The average yields of green veneer of Japanese larch. Dahurian larch and Radiata pine were 57.1, 55.1 and 54.0 percent, respectively. Variables such as initial MC. drying time and veneer thickness had strong effect for Japanese larch veneer, less effect for Radiata pine veneer and nuch less effect on final MC for Dahurian larch veneer in jet drying. Correlation between the current MC and the drying time of Dahurian larch with low variation of initial MC was higher than those of Japanese larch and Radiata pine veneer with high variation of initial MC in high temperature drying. Thickness shrinkages of 2.5mm thick veneer for Japanese larch and Radiata pine were higher than those of 1.5mm thick veneers, but shrinkages of Dahurian larch veneer were similar between two nominal veneer thicknesses.

• Journal of Korean Society of Forest Science
• /
• v.23 no.1
• /
• pp.29-33
• /
• 1974

U-Reuk, a laureate musician in the days of King Jin-Heung, Silla Dynasty, built the Eui Rim Reservoir about 1,400 years ago. This was one of the oldest man-made reservoir. The embankment of the reservoir collapsed by the clumsy artificial drainage on August 19, 1972 when the heavy rainfall of 462 mm/day caused a dangerous overflow of the reservoir. The result of the study on the mystic ancient embankment techniques are as follows: 1. Sandy loam derived from the weathering of granite which is the most widely distributed rock type in the area, was used in the embankment. Large size logs (embankment core) of 30-50 cm in diameter were buried lengthwise along the embankment. 2. The six stocks of Pinus densiflora, 3 stocks of Quercus acutissima, 1 stock of Quercus variabilis and 1 stock of Popolus maximowiczii, altogether 11 stocks are identified. Forest types in the nearby area during the days of the reservoir construction seem to be includde a considerable number of Pinus densiflora, Quercus and Populus species. 3. The angle of repose of the earth materials is taken into account during the embankment. On top of the embankment double layers of clay (20-30 cm indepth) were spread and consolidated. Layer of litter of 20-40 cm in deep covered on the clay layer of the embankment completely, and another layer of clay was consolidated over the litter. Finally, a layer of stones of 10-30 cm in diameter and clay (yellow soil layer) toped the embankment. 4. At the lower part of the embankment clay layer was thicker and became thinner as it goes upwards. At every layer, soil was consolidated and burned. When embankment was completed, it was covered evenly with heavy clay, and finally it was topped with general soil. 5. The heavy clay layer on the inner slope of the embankment showed gray phenomena and litter remained raw humus layer. The clay layer functioned as rubber in the water, and raw humus layer prevented water from seepages. Thus, the embankment was solidly built in this way. 6. The ancient embankment techniques used soils conveyed from nearby area taking the angle of repose into account. Once embankment was completed, clay and litter layers were added to have a plasticity and to withstand the water pressure. 7. It is an excellent technique that the reservoir was constructed with least labor for maximum effects while the recent embankment techniques requires a large amount of labor.