• Steel and Composite Structures
• /
• 제21권5호
• /
• pp.1017-1029
• /
• 2016

When a welded circular hollow section (CHS) tubular joint is subjected to brace axial loading, failure position is located usually at the weld toe on the chord surface due to the weak flexural stiffness of the thin-walled chord. The failure mode is local yielding or buckling in most cases for a tubular joint subjected to axial load at the brace end. Especially when a cyclic axial load is applied, fracture failure at the weld toe may occur because both high stress concentration and welding residual stress along the brace/chord intersection cause the material in this region to become brittle. To improve the ductility as well as to increase the static strength, a tubular joint can be reinforced by increasing the chord thickness locally near the brace/chord intersection. Both experimental investigation and finite element analysis have been carried out to study the hysteretic behaviour of the reinforced tubular joint. In the experimental study, the hysteretic performance of two full-scale circular tubular T-joints subjected to cyclic load in the axial direction of the brace was investigated. The two specimens include a reinforced specimen by increasing the wall thickness of the chord locally at the brace/chord intersection and a corresponding un-reinforced specimen. The hysteretic loops are obtained from the measured load-displacement curves. Based on the hysteretic curves, it is found that the reinforced specimen is more ductile than the un-reinforced one because no fracture failure is observed after experiencing similar loading cycles. The area enclosed by the hysteretic curves of the reinforced specimen is much bigger, which shows that more energy can be dissipated by the reinforced specimen to indicate the advantage of the reinforcing method in resisting seismic action. Additionally, finite element analysis is carried out to study the effect of the thickness and the length of the reinforced chord segment on the hysteretic behaviour of CHS tubular T-joints. The optimized reinforcing method is recommended for design purposes.

• 대한토목학회논문집
• /
• 제11권4호
• /
• pp.45-54
• /
• 1991

선형변단면관형(線形變斷面管型) 단면(斷面) 부재(部材)의 3차원(次元) 공간(空間)에서의 고유진동해석(固有振動解析)을 위하여 회전관성(回轉慣性)도 포함하는 질량(質量) 행열(行列)을 유도하였다. 유도과정에서 정확한 변위함수(變位函數)를 사용했다. 일반적으로 많이 사용되는 변단면(變斷面) 부재(部材)의 경사(傾斜)는 매우 작으므로 '정형적분형(整形積分型)'으로 표현된 행열(行列)을 사용하여 변단면(變斷面) 부재(部材)를 포함하는 구조물을 해석할 때에 신빙성(信憑性)없는 결과를 얻게 된다. 이러한 수치적(數値的) 오류(誤謬)를 피하기 위하여 '급수형(級數型)'의 전개식(展開式)을 유도했다. 변단면(變斷面) 부재(部材)의 구조물(構造物)을 해석하기 위하여 본(本) 연구(硏究)에서 유도(誘導)된 질량(質量) 행열(行列)을 사용하여 구한 고유진동수(固有振動數)와 분할 부재(部材)를 균일단면(均一斷面) 탑형태(塔形態)로 표현하여 구한 고유진동수(固有振動數)를 비교(比較)하여 본 연구결과 효율성(效率性)과 정확성(正確性)이 증진(增進)된 것을 확인하였다.

• Applied Microscopy
• /
• 제24권1호
• /
• pp.11-27
• /
• 1994

The morphological development of the carotid body was studied by electron microscope in human fetuses from 40mm to 260mm crown rump length (10-30 weeks of gestational age). At 40mm fetus, the carotid body was composed of cluster of primitive glomus cells, primitive supporting cells, unmyelinated nerve fibers, and blood capillaries. In connective tissue between internal and external carotid arteries adjacent to the superior cervical sympathetic ganglion, two types of glomus cells through all prenatal period were found. Dark cells contained a dense cytoplasm with conspicuous large dense-cored granules, whereas light cells had a less dense cytoplasm with dense-cored granules. The light cells contained dense-cored granules that were smaller and less abundant than those in the dark cells. The primitive supporting cells appeared star-shaped with attenuated cytoplasmic extensions intervening between the adjacent glomus cells. Synaptic contact between the axon terminals and soma of the glomus cells were first observed at 40mm fetus. In 80-100mm fetus, the carotid body contained tightly packed collection of glomus cells and supporting cells which surrounded the abundant thin-walled blood vessels. Intercellular junctions between the glomus cells and adjacent cells were commonly seen. Nerve endings on the glomus cells have the form of small boutons and the other from of large calyces. During the second half of the fetal period, the glomus cells were completely enveloped by supporting cells and nerve terminals. At 260mm, the morphological features of carotid body were similar to those of human adult. The result of this study demonstrates that there are differences between the carotid body and aorticopulmonary bodies, especially with respect to their synaptic complexes, abundant blood capillaries, and two glomus cell types.

• The Plant Pathology Journal
• /
• 제16권4호
• /
• pp.242-245
• /
• 2000

In 1999 and 2000, a rot of graft-cacti including Hylocereus trigonus (three-angled cactus), Gymnocalycium mihanovichii, and Chamaecereus silvestrii occurred in several greenhouses in major cactus-growing areas of Korea. Typical symptoms included a moist, light brown rot or a watery rot of the stems. A Colletotrichum sp. was isolated from the lesions. The fungus formed dark gray, dense or floccose colonies on potato dextrose agar, frequently forming many light pink acervuli often surrounded with setae. The hyaline, cylindrical conidia were one-celled with round ends. Appressoria were mostly semicircular or clavate. Thin-walled asci contained eight, one-celled, hyaline ascospores (biseriate in ascus). Ascopspores were strainht or curved, ellipsoidal or subcylindrical. Based on these characteristics, the fungus was identified as Glomerlla cingulata (anamorph : C. gloeosporioides). Wound inoculation of basal stems of the cactus by the mycelial plugs or conidia produced symptoms identical to those described above. Various cactus species were compared in susceptibility using stem disc inoculation. Cereus tetragonus, Eriocereus jusbertii, Myrtillocactus geomentrizans, and three-angled cacti from Mexico and Taiwan were susceptible, but C. peruvianus (Peruvian apple cactus) and Harrisia tortuosa not. This is the first report of G. cingulata causing stem rot of graft-cactus in Korea.

• 동력기계공학회지
• /
• 제15권1호
• /
• pp.24-31
• /
• 2011

Rectangular box type structures are used in many fields of civil, mechanical and marine engineering. Especially, Most ship structures are often in contact with inner or outer fluid, like ballast, fuel and stem tanks. Fatigue damages are sometimes observed in these tanks which seem to be caused by resonance with exciting force of engine and propeller. Vibration characteristics of these thin walled tanks in contact with fluid near engine and propeller are strongly affected by added mass of containing fluid. Therefore it is essentially important to estimate the added mass effect to predict vibration of the tanks. Many authors have studied vibration of rectangular tanks containing fluid. Few research on dynamic interaction among tank walls filled with fluid are reported in the vibration of rectangular tanks recently. In case of rectangular tanks, structural coupling between adjacent panels and effect of vibration modes of multiple panels on added mass of water have to be considered. In the previous report, a numerical analysis is performed for the coupling effect between panels of a tank on added mass of containing fluid, the effect of structural constraint between panels on each vibration mode for fluid region, and mode characteristics in accordance with changing breadth of the plates by using finite element method for plates and boundary element method for fluid region. In this paper, the coupling effect between panels of a tank on added mass of containing fluid, the effect of structural constraint between panels on each vibration mode for fluid region, and mode characteristics in accordance with changing length, thickness, and boundary condition of the plates are investigated numerically and discussed.

• Parasites, Hosts and Diseases
• /
• 제51권4호
• /
• pp.441-448
• /
• 2013

This study describes the first record of Bourgelatia diducta (Nematoda: Chabertiidae) from wild boars in the Republic of Korea (=South Korea). Gastrointestinal tracts of 87 Korean wild boars (Sus scrofa coreanus) hunted in mountains in the south-western part of South Korea between 2009 and 2012 were examined for their visceral helminths. B. diducta, as identified by morphological characteristics of the head and tail, were recovered from the large intestine of 47 (54%) wild boars. The average length of adult female worms was $11.3{\pm}0.872$ mm and the thickest part of the body measured $0.54{\pm}0.04$ mm in maximum width, while those of males were $9.8{\pm}0.72$ and $0.45{\pm}0.03$ mm, respectively. The characteristic J-shaped type II ovejector was observed in females, and the type II dorsal ray with 2 rami on each side of the median fissure was uniquely seen in males. The buccal capsule was small, relatively thin-walled, cylindrical, very short, and ring-shaped. The externodorsal ray arose from a common stem with the dorsal ray. The cervical groove was absent. The anterior extremity was equipped with 20-22 external corona radiata, 4 cephalic papillae and 2 lateral amphids around the mouth. The eggs were $66.0{\times}38.9{\mu}m$ in average size. By the present study, B. diducta (Nematoda: Chabertiidae) is recorded for the first time in South Korea. Additionally, morphological characteristics and identification keys provided in the present study will be helpful in the faunistic or taxonomic studies for strongylid nematodes related.

• Progress in Superconductivity
• /
• 제11권1호
• /
• pp.47-51
• /
• 2009

For many large-scale applications of high-temperature superconducting materials, large critical current density ($J_c$) in high applied magnetic fields are required. A number of methods have been reported to introduce artificial pinning centers in $YBa_2Cu_3O_{7-{\delta}}$ films for enhancement of their $J_c$. We studied the microstructures and characteristic of $YBa_2Cu_3O_{7-{\delta}}$ films fabricated on $SrTiO_3$ (100) substrates with ZnO nanorods as pinning centers. Au catalyst nanoparticles were synthesized on STO substrates with self assembled monolayer to control the number of ZnO nanorods. The density of Au nanoparticles is approximately $240{\sim}260{\mu}m^{-2}$ with diameters of $41{\sim}49nm$. ZnO nanorods were grown on STO by hot-walled PLD with Au nanoparticles. Typical size of ZnO nanorod was around 179 nm in diameter and $2{\sim}6{\mu}m$ in length respectively. YBCO films deposited directly on STO substrates show the c-axis orientation, while YBCO films with ZnO nanorods exhibit any mixed phases without any typical crystal orientation.

• 한국강구조학회 논문집
• /
• 제14권6호
• /
• pp.793-802
• /
• 2002

수평곡선 I형교에 동적해석을 수행하기 위하여 박판곡선보 이론에 근거 뒴자유도를 포함한 절점당 7자유도를 갖는 곡선보요소와 7자유도 직선보요소를 사용하여 동적해석프로그램 EQCVB를 작성하였다. 이 프로그램에서는 자유진동해석을 위하여 Gupta의 방법을 사용하였고, 지진하중이 작용할 때 동적해석을 수행하기 위하여 Wilson-${\theta}$방법을 사용하였으며, 범용구조해석 프로그램인 ABAQUS를 사용한 해석 결과와 비교하여 프로그램의 효율성과 타당성을 입증하였다. 지진하중 작용시 수평곡선 I형교의 동적 거동 특성을 파악하기 위하여 다양한 예제에 대한 해석을 수행하였다.

• 펄프종이기술
• /
• 제42권1호
• /
• pp.7-12
• /
• 2010

Morphological characteristics of hemp fiber were investigated using a light microscope in order to provide fundamental data for the use of hemp as a papermaking law material. Phloem of hemp is composed of cortical parenchyma cells and bast fiber with thick walls while xylem is composed of vessel, wood fiber and ray parenchyma cells. Also there are solitary pore and radial pore multiple which exist in diffuse porous pattern. Ray cells consist of uniseriate rays and thin walled ray parenchyma cells. Wood fibers are composed of three types: a large diameter fiber with longer length; a large diameter fiber with shorter length; a small diameter fiber with medium length. Vessel elements are composed of: a medium length one; a longer length one; the one whose both end walls have ligules or tails. Parenchyma cells in xylem and pit parenchyma cells have completely different size and shape. For bast fiber, the average length is about 4.4 mm and the width is about $30.5\;{\mu}m$; for vessel element, $600.0\;{\mu}m$ in length and $493.6\;{\mu}m$ in width; for wood fiber, $1000\;{\mu}m$ and $38.9\;{\mu}m$; for parenchyma cell, $50\;{\mu}m$ and $26.4\;{\mu}m$.

• Steel and Composite Structures
• /
• 제22권2호
• /
• pp.449-472
• /
• 2016

This paper studies the seismic behavior of reinforced concrete (RC) walls with encased cold-formed and thin-walled (CFTW) steel truss, which can be used as an alternative to the conventional RC walls or steel reinforced concrete (SRC) composite walls for high-rise buildings in high seismic regions. Seven one-fourth scaled RC wall specimens with encased CFTW steel truss were designed, manufactured and tested to failure under reversed cyclic lateral load and constant axial load. The test parameters were the axial load ratio, configuration and volumetric steel ratio of encased web brace. The behaviors of the test specimens, including damage formation, failure mode, hysteretic curves, stiffness degradation, ductility and energy dissipation, were examined. Test results indicate that the encased web braces can effectively improve the ductility and energy dissipation capacity of RC walls. The steel angles are more suitable to be used as the web brace than the latticed batten plates in enhancing the ductility and energy dissipation. Higher axial load ratio is beneficial to lateral load capacity, but can result in reduced ductility and energy dissipation capacity. A volumetric ratio about 0.25% of encased web brace is believed cost-effective in ensuring satisfactory seismic performance of RC walls. The axial load ratio should not exceed the maximum level, about 0.20 for the nominal value or about 0.50 for the design value. Numerical analyses were performed to predict the backbone curves of the specimens and calculation formula from the Chinese Code for Design of Composite Structures was used to predict the maximum lateral load capacity. The comparison shows good agreement between the test and predicted results.