• 제목/요약/키워드: thin type

검색결과 2,509건 처리시간 0.03초

250 m 급 Bi-2223/Ag 고온 초전도선재 제조 (Fabrication of 250 m class Bi-2223/Ag HTS Tapes)

  • 하홍수;오상수;하동우;장현만;김상철;송규정;박찬;권영길;류강식
    • Progress in Superconductivity
    • /
    • 제3권1호
    • /
    • pp.130-133
    • /
    • 2001
  • A multifilamentary Bi-2223 HTS tape for superconducting power applications was studied through the fabrication of 250-meter long tapes by the PIT(powder in tube) process. To fabricate continuous long wire, a drawing machine, a two-drum bull block and a rolled tape winding machine were developed. Especially, 250-meter long tapes were heat treated in the shape of pancake coil to reduce the heat affect zone and to achieve the high critical current. Engineering critical current density was improved through both the enhancements of critical current density by control of thermal process and the increase of filling factor by using thin Ag alloy sheath tubes less than 1.5 mm in thickness. We have made successfully 250-meter long 37 filamentary tapes with high filling factor up to 31 % employing the modified drawing and rolling technique. The critical current of 250-meter long tapes with pancake coil type was measured by transport method at self-field up to 250 gauss of center field. The measured values, based on the transport critical current at self-field, $I_{c}$ -B characteristics and magnetic field analysis, are 34 A of I$_{c}$ and 4.0 $kA/\textrm{cm}^2$ of $J_{e}$ at 250 m, 77 K, and 0 T. We also have achieved the 56 A of I$_{c}$ and 7.0 $0 kA/\textrm{cm}^2$ of$ J_{e}$ in short tapes at 77K, self-field, and 1$mutextrm{V}$/cm.

  • PDF

P3HT가 도핑된 황화납 양자점 기반의 고감도 이산화질소 가스 센서 (High-sensitivity Nitrogen Dioxide Gas Sensor Based on P3HT-doped Lead Sulfide Quantum Dots)

  • 권진범;하윤태;최수지;백수빈;정대웅
    • 센서학회지
    • /
    • 제32권3호
    • /
    • pp.169-173
    • /
    • 2023
  • With the increasing concern of global warming caused by greenhouse gases owing to the recent industrial development, there is a growing need for advanced technology to control these emissions. Among the various greenhouse gases, nitrogen dioxide (NO2) is a major contributor to global warming and is mainly released from sources, such as automobile exhaust and factories. Although semiconductor-type NO2 gas sensors, such as SnO2, have been extensively studied, they often require high operating temperatures and complicated manufacturing processes, while lacking selectivity, resulting in inaccurate measurements of NO2 gas levels. To address these limitations, a novel sensor using PbS quantum dots (QDs) was developed, which operates at low temperatures and exhibits high selectivity toward NO2 gas owing to its strong oxidation reaction. Furthermore, the use of P3HT conductive polymer improved the thin film quality, reactivity, and reaction rate of the sensor. The sensor demonstrated the ability to accurately measure NO2 gas concentrations ranging from 500 to 100 ppm, with a 5.1 times higher sensitivity, 1.5 times higher response rate, and 1.15 times higher recovery rate compared with sensors without P3HT.

반발경도법을 이용한 침목플로팅 궤도의 콘크리트 침목 강도추정 기법 연구 (A Study on Estimation Method of Concrete Sleeper Strength for Sleeper Floating Track using Rebound Hardness Test Method)

  • 정지승;이정숙;최정열
    • 문화기술의 융합
    • /
    • 제8권3호
    • /
    • pp.277-282
    • /
    • 2022
  • 본 연구의 대상궤도구조인 침목플로팅궤도(STEDEF)는 상대적으로 얇은 콘크리트 침목(RC Block) 하부에 매우 소프트한 방진패드가 설치되어 있는 궤도형식으로서 방진패드가 콘크리트 강도 추정결과에 영향을 미칠 수 있을 것으로 예상되었다. 이에 본 연구에서는 일반적인 토목구조물의 콘크리트 압축강도 추정기법인 반발경도시험법을 철도 궤도의 콘크리트 침목에 적용하기 위한 현장 적용성 평가를 수행하였다. 본 연구에서는 일반적인 토목구조물과 다른 궤도구조의 특성이 반영된 콘크리트 침목의 강도추정기법을 분석하고자 공용중인 콘크리트 침목의 강도추정결과에 영향을 미칠 수 있는 매개변수 실험을 수행하였다. 연구결과, 콘크리트 침목의 단면형상을 고려한 적정 타격위치를 제시하였으며, 콘크리트 침목의 상태와 지지조건에 따른 강도추정결과의 차이를 도출하였다.

UV-cured Polymer Solid Electrolyte Reinforced using a Ceramic-Polymer Composite Layer for Stable Solid-State Li Metal Batteries

  • Hye Min Choi;Su Jin Jun;Jinhong Lee;Myung-Hyun Ryu;Hyeyoung Shin;Kyu-Nam Jung
    • Journal of Electrochemical Science and Technology
    • /
    • 제14권1호
    • /
    • pp.85-95
    • /
    • 2023
  • In recent years, solid-state Li metal batteries (SSLBs) have attracted significant attention as the next-generation batteries with high energy and power densities. However, uncontrolled dendrite growth and the resulting pulverization of Li during repeated plating/stripping processes must be addressed for practical applications. Herein, we report a plastic-crystal-based polymer/ceramic composite solid electrolyte (PCCE) to resolve these issues. To fabricate the one-side ceramic-incorporated PCCE (CI-PCCE) film, a mixed precursor solution comprising plastic-crystal-based polymer (succinonitrile, SN) with garnet-structured ceramic (Li7La3Zr2O12, LLZO) particles was infused into a thin cellulose membrane, which was used as a mechanical framework, and subsequently solidified by using UV-irradiation. The CI-PCCE exhibited good flexibility and a high room-temperature ionic conductivity of over 10-3 S cm-1. The Li symmetric cell assembled with CI-PCCE provided enhanced durability against Li dendrite penetration through the solid electrolyte (SE) layer than those with LLZO-free PCCEs and exhibited long-term cycling stability (over 200 h) for Li plating/stripping. The enhanced Li+ transference number and lower interfacial resistance of CI-PCCE indicate that the ceramic-polymer composite layer in contact with the Li anode enabled the uniform distribution of Li+ flux at the interface between the Li metal and CI-PCCE, thereby promoting uniform Li plating/stripping. Consequently, the Li//LiFePO4 (LFP) full cell constructed with CI-PCCE demonstrated superior rate capability (~120 mAh g-1 at 2 C) and stable cycle performance (80% after 100 cycles) than those with ceramic-free PCCE.

플라스틱칩 결체(結締) 톱밥보드의 기계적(機械的) 및 물리적(物理的) 성질(性質)에 관(關)한 연구(硏究) (A Study on the Mechanical and Physical Properties of Sawdustboard combined with Plastic Chip)

  • 이필우;서진석
    • Journal of the Korean Wood Science and Technology
    • /
    • 제15권3호
    • /
    • pp.44-55
    • /
    • 1987
  • In order to study the effect of sawdustboard combined with plastic chips, 0.5mm($T_1$), 1mm($T_2$), 1.4mm($T_3$) thick nylon fiber. polypropylene rope fiber(RP), and 0.23mm thick moth-proof polypropylene net fiber(NP) were cut into 0.5, 1, 2cm long plastic chips. Thereafter, sawdustboard combined with plastic chips prepared as the above and plastic non-combined sawdustboard(control) were manufactured into 3 types of one-, two-, and three layer with 5 or 10% combination level. By the discussions and results at this study, the significant conclusions of mechanical and physical properties were summarized as follows: 1. The MORs were shown in the order of 3 layer> 2 layer> 1 layer among plastic non-combined boards, and $T_3$ < $T_2$ < $T_1$ < RP (NP(5%) < NP(l0%) among plastic combined boards. In 2cm long plastic chip in 1 layer board, the highest strength through all the composition was recognized. 1 layer board showing the lower strength with 0.5cm plastic chip rendered to the bending strength improvement by 2 or 3 layer board composition. On the other hand, 2 or 3 layer combined with 1, 2cm long polypropylene net fiber chips incurred MOR's conspicuous decrease requiring optimum plastic chip combined level and consideration to combined type. 2. MOE in plastic non-combined 3 layer board exhibited sandwich construction effect by higher resin content application to surface layer in the order of 3layer>1layer>2layer with the highest stiffness of the board combined with polypropylene chip, while nylon chip-combined board had little difference from plastic non-combined board. In relevant to length and layer effect, 3 layer board combined with the 0.5cm long polypropylene net fiber chip in 5% and 10% combined level presented 34-43% and 44-76% stiffness increase against plastic non-combined board(control), respectively. Moreover, in 1 layer board, 30% stiffness increase with 10% against 5% combined level in the 1 and 2cm long polypropylene net fiber chip was obtained. 3. Stress at proportional limit(Spl) showing the fiber relationship (r: 0.81-0.97) between MOR presented in the order of 1 layer<2 layer<3 layer in plastic non-combined board. Correspondingly, combined effect by layer and plastic chip length was similar to MOR's. 4. Differently from previous properties(MOR, MOE, Spl). work to maximum load(Wml) of 2 layer board approached to that of 3 layer board. Conforming the above phenomenon. 2 layer combined with 0.5cm long polypropylene net fiber chip kept the greater work than 1 layer. The polypropylene combined board superior to nylon -and plastic non - combined board seemed to have greater anti - failing capacity. 5. Internal bond strength(IB), in contrast to MOR's tendency. showed in the order of T1

  • PDF

서태평양 마샬제도 북서쪽에 위치한 세 해저산에 대한 음향상 연구 (Acoustic Characterization of Three Seamounts Located in the Northwest of Marshall Islands, Western Pacific)

  • 이태국;이기화;문재운;정미숙;김현섭;고영탁
    • 지구물리
    • /
    • 제7권3호
    • /
    • pp.193-206
    • /
    • 2004
  • 서태평양 마샬제도 북서쪽 오가사와라 균열대(Ogasawara Fracture, OFZ) 내에 위치하는 세 해저산들에 대해 2003년 망간각 탐사의 일환으로 고해상(3~7kHz) 천부퇴적탐사 자료를 포함한 지구물리 자료를 획득하였다. OFZ은 600 km의 우측방 이동(right lateral movement)을 보이고 축방향에 수직으로 150 km의 폭을 가지며 동 마리아나분지와 피가페타 분지를 분리한다. OFZ은 다른 균열대와는 달리 내부에 다량의 해저산들을 포함한다. OFZ 주변 해저산에서 획득한 음향상의 명확성 연속성 구조 지형 및 위치에 따라 총 가지로 분류하였다: 음향상Ⅰ-1 원양성 퇴적층(뚜렷한 표층반사파와 평행한 지층내 반사파를 갖음), 음향상Ⅰ-2 원양성 퇴적층(뚜렷한 표층반사파와 지층내 투명한 음향층이 존재), 음향상Ⅱ-1 화산 기저암(약한 표층반사파가 존재하고 지층내 반사파가 없음), 음향 상Ⅱ-2 debrite(불분명한 표층반사파와 지층내 투명한 음향층이 존재), 음향상 Ⅱ-3 원양성 퇴적층 혹은 저탁암 (불분명한 표층반사파와 연속적인 지층내 반사파가 존재함), 음향상 Ⅱ-4 저탁암(확산된 형태의 지층내 반사층이 존재함), 음향상 Ⅲ-1 reef build-up complex(작은 규모의 쌍곡선 형태의 표층반사파가 연결되어 나타남), 음향상Ⅲ-2 화산 기저암(큰 쌍곡선의 표층반사파가 다양한 수심에서 연결되어 나타남), 음향상Ⅲ-3 슬럼프(작은 규모의 블록형태나 쌍곡선 형태의 반사파들이 불규칙하게 보임). 해저산의 정상부는 음향상 Ⅰ-1,Ⅰ-2,Ⅲ-1이, 경사면을 따라 음향상 Ⅱ-1,Ⅱ-2,Ⅲ-3이, 분지에는 음향상Ⅱ-3,Ⅱ-4가 우세하게 분포한다 연구지역에서 음향상Ⅱ-2와 Ⅲ-3이 복합적으로 나타나는 사태의 원인은 (1) OFZ 내부에 존재하는 강한 장력에 의해 발생한 균열이나 단층, (2) 정상부에 발생한 단층과 급한 상부경사면일 것으로 추정된다. 해저산 정상부는 음향상 Ⅰ-1과Ⅰ-2가 구분되어 나타나는데, 음향상Ⅰ-2는 해류가 강하여 해류로부터 안정된 암초나 장애물 주위에만 간헐적으로 쌓인 형태이고, 음향상 Ⅰ-1은 해류가 약해지고 활발한 퇴적률을 보이는 시기에 쌓인 형태로 구분된다.

  • PDF

포항-울산간의 점토자원의 지질과 그 물리화학적 특성에 관한 연구 (A Study on Geology of Clay Mineral Deposits of Pohang-Ulsan Area and their Physico-Chemical Properties)

  • 김옥준;이하영;김서운;김수진
    • 자원환경지질
    • /
    • 제4권4호
    • /
    • pp.167-215
    • /
    • 1971
  • I. Purpose and Importance of the Study The purpose of the present study is to clarify to geological, mineralogical, and physico-chemical properties of the clay minerals deposits imbedded in the Tertiary sediments in the areas between. Pohang and Ulsan along southeastern coastal region of Korea. These clays are being mined and utilized for filter and insecticide after activation or simple pulverizing, nontheless activated clays are short coming as chemical industry in Korea has been rapidly grown in recent years. In spite of such increase in clay demand, no goological investigation on clay deposits nor physico-chemical properties of the clays have been carried out up to date. Consequently activated clays produced in Korea is not only of low grade but also of shortage in supply, so that Korea has to import activated clays of better grade. The importance of the present study lies, therefore, on that guiding principle could be laid down by knowing stratigraphical horizons, of clay deposits and fundamental data of improving grade of activated clays might be derived from the results of physico-chemical examinations. II. Contents and Scope of the study The contents of the study are pinpointed down in the following two subjects: 1) General geological investigation of Tertiary formations distributed in the areas between Pohang and UIsan, and detail geological study of the bentonitic clay deposits imbedded in them. 2) To clarifty physico-chemical characteristics of the clays by means of chemical analysis, X-ray diffraction and electron microscope. The scope of the study involves the following there points: i) Regional geological investigation-This investigation has been carried out in order to find out the distribution of Tertiary sediments and exact location of clay mineral deposits in the areas between Pohang and UIsan. ii) Detail geological investigation-This has been concentrated in and around the clay deposits which. had been found out by the regional investigation. iii) Laboratory researchs include i) age determination and correlation of Tertiary sediments by paleontological study, and ii) Chemical analysis, X-ray diffraction, and electron microscopic studies on clays, samples taken from various clay deposits. III. Research Results and Suggestions 1) The geology of the area investigated is composed mainly of Janggi and Beomgokri groups of Miocene age in ascending order rested on the upper Silla system, Balkuksa granite and volcanic rocks of upper Cretaceous age as base. 2) Janggi group is composed in ascending order of Janggi conglomerate, Nultaeri rhyolitic tuff, Keumkwangdong shale, two beds of lignite-bearing formations which consist of alternation of conglomerate, sandstone and mudstone, and andesitic, rhyolitic, and basaltic tuff beds. 3) Beomgokri group is mainly composed of andesitic to rhyolitic tuff interlayered by conglomerate and tuffaceous sandstone. In the areas around boundary between North-and South Kyeongsang-do is distributed Haseori farmation which is composed of conglomerate, sandstone, mudstone and andesitic to rhyolitic tuff, and which is correlated to Eoilri formation of Janggi group. 4) Clay deposits of the area are interbedded in Eoilri, Haseori, Nultaeri tuff, Keumkwangdong shale, upper and lower horizon of the lower lignite-bearing seam, and Keumori rhyolitic tuff formations of Janggi group; and are genetically classi.fied into four categories, that is, i) those derived from volcanic ash beds(Haseori and Daeanri deposits), ii) those of secondary residual type from rhyolitic tuff beds(Seokupri deposits), iii) Clay beds above and beneath the lignite seams, (Janggi and Keumkwangdong deposits), and iv) those derived from rhyolitic tuff beds(Sangjeong and Tonghae deposits). 5) Mineral constituents of clay deposits are, according to X-ray diffraction, montmorillonite accompanied in different degree by cristobalite, plagioclase, quartz, stilbite, and halloysite in rare occasion. The clays are grouped according to mineral composition into four types; i) those consist mostly of montmorillonite, ii) those composed of montmorillonite and cristobalite, iii) those composed of montmorillonite and plagioclase, and iv) those composed of montmorillonite, plagioclase and quartz. 6) Clays interbedded in Haseori formation and vicinity of lignite seams belong to the first type, are of good quality and derived either from volcanic ash bed, or primary clay beds near lignite seams. Clays belonged to other types are derived from weathering of rhyolitic tuff formations and their quality varies depending upon original composition and degree of weathering. Few clays in secondary residual type contain small amount of halloysite. 7) Judging from analytical data, content of silica($SiO_2$) varies proportionally with content of cristobalite, and alumina($Al_2O_3$) content does not vary with that of plagioclase, but increases in the sedimentary bedded type of deposits. 8) It is unknown whether or not these days could be upgraded by beneficiation since no grain size of these impurities nor beneficiation test had been studied. 9) Clay beds derived from valcanic ash layers or sedimentary layers at the vicinity of lignite seams are thin in thickness and of small, discontinueous lenticular shape, although they are of good quality; and those derived from rhyolitic tuff formations or residual type from tuff are irregular in both occurrence and quality. It is, therefore, not only very difficult but also meaningless to calculate its reserve, and reserve estimation, even if done, will greatly be deviated from practically minable one. Consequently, way of discovery and exploitation of clay deposits in the area under consideration is to check the geologically favorable areas whenever needed.

  • PDF

근거리에서 수직주시시차와 입체시와의 관계 (A Correlation Between Vertical Fixation Disparity and Stereopsis at Near)

  • 윤민화
    • 한국안광학회지
    • /
    • 제18권3호
    • /
    • pp.321-327
    • /
    • 2013
  • 목적: 수직주시시차의 유형별 분포를 분석하고 입체시와의 상관관계를 알아보고자 한다. 방법: 입체시 검사표는 부분적으로 random dot을 이용하는 RANDOT(R) stereotest를 사용하였다. 근거리에서 수직주시시차는 환자와의 거리를 25 cm 유지한 상태에서 Wesson fixation disparity card를 이용해, 한쪽 눈에 하나씩 보이는 두 개의 가는 선이 프리즘을 가입하여 한 줄로 일치될 때의 측정결과를 바탕으로 주시시차곡선을 6가지 유형으로 분류하였다. 결과: 43명을 대상으로 근거리 수직주시시차 곡선의 유형은 제 1유형이 55.82%로 가장 많이 분포하였고, 제 2유형이 23.25%로 가장 적게 분포하였으며, 제 3유형이 4.65%, 제 4유형은 4.65%, 제 5유형은 6.98%, 제 6유형은 4.65%로 분포하였다. 두 변수들 사이의 선형적 상관관계의 정도를 보는 상관분석의 결과를 보면 입체시는 수직주시시차를 나타내는 Y-intercept(r = -0.07), 일부융합제거시 사위량(r = -0.03), 완전융합제거시 사위량(r = -0.00)과 상관관계가 없는 것으로 나타났고, 통계적으로 유의하지 않았다(p>0.05). 수직주시시차 곡선의 기울기와는 r = 0.36으로 양의 상관관계를 가지며 그 관계는 낮은 편으로 통계적으로 유의하였다(p<0.05). 수직주시시차를 나타내는 Y-intercept는 일부융합 제거시 사위량(r = 0.89)과는 높은 상관관계를 보였으며 통계적으로 유의하였다(p<0.05). 수직주시시차 곡선의 기울기는 r = -0.33으로 음의 상관관계를 보였고, 그 관계는 낮았으며 통계적으로 유의하게 나타났다(p<0.05). 회귀분석(regresson analysis)결과, 입체시와 수직주시시차의 변화에 따른 관계는 수직주시시차가 1분( ' ) 변하면 입체시는 7.631초( ' ) 만큼 변화하며, 입체시가 1초( ' ) 변하면 수직주시시차는 0.017분( ' ) 만큼 변화하였고 통계적으로 유의하였다(p<0.05). 결론: 입체시와 수직주시시차는 낮은 상관관계를 보였으며, 수직주시시차 만으로 입체시를 판단하기 힘들며 입체시에 영향을 미치는 인자는 수직주시시차 이외의 다른 요인이 더 클 것으로 사료된다.

원생대 하동회장암체 내 철-티탄 광체의 산상과 변형 (Occurrence and Deformation of Fe-Ti ores from the Proterozoic Hadong Anorthosites, Korea)

  • 정재성;김종선;조형성;송철우;손문;류충렬;지세정;김인수
    • 암석학회지
    • /
    • 제19권1호
    • /
    • pp.31-49
    • /
    • 2010
  • 한반도 남부 원생대 하동회장암체 내에는 주변 회장암의 암상과 무관하게 대략 남북방향으로 단속적으로 철-티탄 광체들이 출현한다. 이들 광체의 야외산상과 변형사를 밝히기 위하여 야외기재학적 특징과 주변 지질구조 분석 그리고 주요 암석과 광체 내 티탄철석에 대한 박편관찰과 전자현미분석을 실시하였다. 이번 연구의 대상 광체는 맥상과 층상 광체로 구분된다. 맥상 광체는 회장암체가 정치 고화된 이후에 관입하였음이 확실시되며, 층상 광체는 후기의 강력한 우수향 연성 전단작용에 의해 상대적으로 규모가 큰 맥상 광체가 압쇄암화 되고 전단엽리와 평행하게 전위된 결과로 해석된다. 철-티탄 광체는 청룡리, 월횡리, 종화리, 자양리와 백운리의 순서로 남에서 북으로 갈수록 후기 우수향 연성 전단변형을 많이 받았으며, 광체 내 티탄철석의 함량은 감소하는 특징을 보인다. 광체 내 티탄철석은 야외산상과 후기 전단변형의 정도와 무관하게 유사한 화학조성을 가지며, $TiO_2$ 함량이 52~55 wt.% 내외로 자철석으로 용리되지 않은 순수한 티탄철석의 화학조성을 보여준다. 야외 지질구조 자료들을 분석하면, 하동회장암체는 마그마의 분화작용으로 만들어진 누적 엽리의 생성 이후에 북북동-남남서 습곡, 철-티탄 광체의 관입, 북북서~북북동 우수향 연성 전단작용, 북서~북북서 좌수향 아취성 전단작용, 그리고 북북동~북동 방향의 염기성 마그마의 관입의 순서로 변형된 것으로 판단된다.

미세균열의 길이 및 간격 분포를 이용한 결의 평가(1) (Evaluation for Rock Cleavage Using Distribution of Microcrack Lengths and Spacings (1))

  • 박덕원
    • 암석학회지
    • /
    • 제26권1호
    • /
    • pp.45-54
    • /
    • 2017
  • 미세균열의 길이와 간격의 분포를 이용하여 쥬라기 거창화강암에서 발달하는 결의 특성을 분석하였다. 상기 길이와 간격에 대한 분포상은 박편의 확대사진(${\times}6.7$)에서 도출하였다. 일차적으로, 여섯 방향의 결에 대한 길이 및 간격-누적빈도 도표를 미세균열의 길이의 밀도가 증가하는 순(($H2{\rightarrow}R1$)으로 배열하였다. 상기 두 종류의 도표의 결합을 통하여 다양한 파라미터를 추출하였다. 3개 채석면 및 3개 결을 대변하는 판별요소들은 파라미터의 값 사이의 상호 대비를 통하여 획득하였다. 이 연구의 분석 결과를 요약하면 다음과 같다. 여섯 방향의 결에 대한 평가는 간격(${\alpha}$, ${\lambda}_S$) 및 길이(${\beta}$, ${\lambda}_L$)와 관련된 두 지수 직선 사이의 (1) 교차각(${\alpha}-{\beta}$) 및 (2) 지수차(${\lambda}_S-{\lambda}_L$)과 같은 파라미터를 이용하여 수행하였다. 파라미터(1 및 2)의 값은 H(3번 결, (H1 + H2)/2) < G(2번 결, (G1 + G2)/2) < R(1번 결, (R1 + R2)/2)의 순서이다. 반면에 3개 면에 대한 상기 2개 파라미터의 값은 R < G < H의 순서이다. 한편, 두 지수 직선 사이의 수렴방향을 도출하였다. 상기 방향은 선 ol을 중심으로 하여 선 os'의 배치에 따른다. 선 ol이 좌측의 상부 영역 그리고 선 os'가 우측의 하부영역에 위치하는 경우, 상기 두 지수 직선은 Y축의 방향으로 수렴한다(R-유형). 반면에, 선 ol 및 선 os'의 배열순이 역전되었을 때에는 상기 두 선은 X축의 방향으로 수렴한다(H-유형). 특히, 두 수직선의 배열에 의하여 교차각(${\alpha}-{\beta}$)의 양(+) 혹은 음(-)의 값이 결정된다. 이러한 유형의 상관성 분석은 결의 상대적인 강도 평가 및 3개 채석면의 판별에 유용하다.