• Journal of Korean Vacuum Science & Technology
• /
• 제7권2호
• /
• pp.39-44
• /
• 2003

Recent ULSI and multilevel structure trends in microelectronic devices minimize the line width down to a quarter micron and below, which results in the high current densities in thin film interconnections. Under high current densities, an EM(electromigration) induced failure becomes one of the critical problems in a microelectronic device. This study is to improve thin film interconnection materials by investigating the EM characteristics in PSG(phosphosilicate glass)/SiO$_2$ passivated Al-l%Si thin film interconnections. Straight line patterns, wide and narrow link type patterns, and meander type patterns, etc. were fabricated by a standard photholithography process. The main results are as follows. The current crowding effects result in the decrease of the lifetime in thin film interconnections. The electric field effects accelerate the decrease of lifetime in the double-layered thin film interconnections. The lifetime of interconnections also depends upon the current conditions of P.D.C.(pulsed direct current) frequencies applied at the same duty factor.

• 한국진공학회지
• /
• 제5권2호
• /
• pp.161-168
• /
• 1996

For the improvement of microelectronic thin film interconnection materials, dielectric passivation effects on the electromigration phenomena were studied. Using Al-1%Si, various shaped patterns were fabricated and dielectric passivation layers of several structures were deposited on the $SiO_2$ layer. Lifetime of straight pattern showed 2~5 times longer than the other patterns that had various line width and area. It is believed that the flux divergence due to the structural inhomogeneity and so the current crowding effects shorten the lifetime of thin film interconnections. The lifetime of thin film interconnections seems to depend on both the passivation materials and the passivation thickness. PSG/$SiO_2$ dielectric passivation layers showed longer lifetime than $Si_3N_4$ dielectric passivation layers. This results from the PSG on $SiO_2$ layer reduces stress and from the improvement of resistance to the moisture and to the mobile ion such as sodium. This is also believed that the lifetime of thin film interconnections seems to depend on the passivation thickness in case of the same deposition materials.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1993년도 제5회 학술발표회 논문개요집
• /
• pp.58-59
• /
• 1993

• 한국진공학회지
• /
• 제15권1호
• /
• pp.89-96
• /
• 2006

최근 미세전자 소자에서 초고집적, 적층구조 추세는 선폭이 $0.25{\mu}m$ 이하까지 소형화되고 있는 실정이다. 이러한 미세화는 박막배선에서 높은 전류밀도를 초래하게 된다. 높은 전류밀도 하에서는 엘렉트로마이그레이션에 의한 결함발생이 미세전자 소자에서의 치명적인 문제점의 하나로 대두되고 있다. 본 연구는 Ag, Cu, Au, 그리고 Al 박막 등에서 엘렉트로마이그레이션 특성을 조사함으로써 박막배선 재료를 개선하기 위한 것이다. 고전기전도도를 갖고 있는 Ag, Cu, Au, 그리고 Al 박막배선에서 엘렉트로마이그레이션에 대한 저항 특성을 결함발생 시간 분석으로부터 활성화 에너지를 측정함으로써 조사하였다. 광학현미경 그리고 XPS 분석이 박막에서의 결함분석에 사용되었다. Cu 박막이 엘렉트로마이그레이션에 대해 상대적으로 높은 활성화 에너지를 보였다. 따라서 Cu 박막이 높은 전류빌도 하에서 엘렉트로마이그레이션에 대한 높은 저항성이 요구되는 차세대 미세전자 소자에서 적합한 박막배선 재료로서의 가능성을 갖는 것으로 판단된다. 보호막 처리된 Al 박막은 평균수명 증가, 엘렉트로마이그레이션에 대한 저항 특성 향상을 나타내며 이는 보호막 층과 박막배선 재료 계면에서의 유전 보호막 효과에 기인하는 것으로 사료된다.

• 한국진공학회지
• /
• 제4권1호
• /
• pp.60-66
• /
• 1995

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 C
• /
• pp.1372-1374
• /
• 2001

This paper describes fabrication and characteristics of metal thin-film pressure sensor for working at high temperature. The proposed pressure sensor consists of a chrom thin-film, patterned on a Wheatstone bridge configuration, sputter-deposited onto thermally oxidized Si membranes with an aluminium interconnection layer. The fabricated pressure sensor presents a low temperature coefficient of resistance, high-sensitivity, low non-linearity and excellent temperature stability. The sensitivity is 1.097 $\sim$ 1.21 mV/V kgf/$cm^2$ in the temperature range of 25 $\sim$ $200^{\circ}C$ and the maximum non-linearity is 0.43 %FS.

• 한국전기전자재료학회논문지
• /
• 제14권5호
• /
• pp.405-409
• /
• 2001

This paper describes fabrication and characteristics of metal thin-film pressure sensor for working at high temperature. The proposed pressure consists of a chrom thin-film, patterned on a Wheat stone bridge configuration, sputter-deposited onto thermally oxidized Si membranes with an aluminium interconnection layer. The fabricated pressure sensor presents a low temperature coefficient of resistance, high-sensitivity, low non-linearity and excellent temperature stability. The sensitivity is 1.097∼1.21mV/V$.$kgf/$\textrm{cm}^2$ in the temperature range of 25∼200$^{\circ}C$ and the maximum non-linearity is 0.43%FS.

• 한국광학회:학술대회논문집
• /
• 한국광학회 1990년도 제5회 파동 및 레이저 학술발표회 5th Conference on Waves and lasers 논문집 - 한국광학회
• /
• pp.215-218
• /
• 1990

A method for optical representation and modulation of synaptic interconnections between neurons using photoanisotropic amorphous As2S3 thin film is discussed. Experimental results show that the proposed method can be used for the representation of not only excitatory synaptic connections but also inhibitory synaptic connections. Applications of the method to the implementation of optical learning machine is also discussed.

• 마이크로전자및패키징학회지
• /
• 제29권2호
• /
• pp.33-41
• /
• 2022

최근 플렉시블 전자소자의 안정적인 전기적 연결을 위한 유연전도성 접합 기술의 연구 필요성이 대두되고 있다. 기존의 금속 납땜 접합에서 발생하는 기계적 파손 문제는 탄성 계수가 작거나 두께가 얇은 재료를 기반으로 제작된 유연전도성 접합을 통해 해결할 수 있다. 기계적 특성을 향상시키는 동시에 안정적인 전기적 연결이 가능하도록 높은 전기전도도를 가진 물질을 박막화하거나, 작은 탄성 계수를 가진 물질에 혼합하는 방식 등으로 형성된다. 대표적인 유연전도성 접합 기술로는 박막 증착을 통한 유연전도성 접합, 유연 전도성 접착제 기반 접합, 그리고 액체 금속 기반의 전도성 접합 형성 방법 등이 있으며 본 논문에서는 각 방법들의 기계적/전기적 특성 향상 전략과 그 쓰임을 소개한다.

• 한국재료학회지
• /
• 제20권11호
• /
• pp.600-605
• /
• 2010

In order to meet the requirements of faster speed and higher packing density for devices in the field of semiconductor manufacturing, the development of Cu/Low k device material is explored for use in multi-layer interconnection. SiOC(-H) thin films containing alkylgroup are considered the most promising among all the other low k candidate materials for Cu interconnection, which materials are intended to replace conventional Al wiring. Their promising character is due to their thermal and mechanical properties, which are superior to those of organic materials such as porous $SiO_2$, SiOF, polyimides, and poly (arylene ether). SiOC(-H) thin films containing alkylgroup are generally prepared by PECVD method using trimethoxysilane as precursor. Nano voids in the film originating from the sterichindrance of alkylgroup lower the dielectric constant of the film. In this study, methyltriphenylsilane containing bulky substitute was prepared and characterized by using NMR, single-crystal X-ray, GC-MS, GPC, FT-IR and TGA analyses. Solid-state NMR is utilized to investigate the insoluble samples and the chemical shift of $^{29}Si$. X-ray single crystal results confirm that methyltriphenylsilane is composed of one Si molecule, three phenyl rings and one methyl molecule. When methyltriphenylsilane decomposes, it produces radicals such as phenyl, diphenyl, phenylsilane, diphenylsilane, triphenylsilane, etc. From the analytical data, methyltriphenylsilane was found to be very efficient as a CVD or PECVD precursor.