• 콘크리트학회논문집
• /
• 제18권2호
• /
• pp.213-218
• /
• 2006

시멘트페이스트 공극 내 확장 메니스커스 영역을 초승달 영역, 박막 영역, 흡착 영역으로 구분하고 공극 크기에 따른 액막 두께, 흡착층 두께, 모세관 압력, 분리 압력을 압력 평형 방정식을 이용하여 산정하였다. 그 결과 공극 크기와 흡착층 두께와의 연관식을 도출할 수 있었으며, 공극 크기 $1nm{\sim}1{\mu}m$에 따른 흡착층 두께는 $0.299{\sim}2.700nm$로 나타났고 특히 10nm이하의 공극에서 흡착층 두께 감소에 따른 분리압력의 증가효과가 크게 나타났다. 따라서 시멘트페이스트의 자기 수축은 10nm이하의 공극이 생성되면서 크게 증가하는 것으로 판단된다. 이러한 분리 압력과 모세관 압력을 수축 구동력으로 적용한 자기 수축 예측치는 실험값에 비하여 재령 $1{\sim}4$일까지는 작게 이후부터는 큰 결과를 나타내었다. 이는 초기재령에서의 공극측정시 공극 손상과 이에 따른 수축구동력 과소평가와 불포화 개별공극 가정에 따른 수축구동력 과대평가의 상호작용으로 판단되므로 추후 이에 대한 보완점으로 수화도등의 공극 대체 모델과 불포화공극에 대한 고려사항이 필요할 것으로 판단된다.

• Elastomers and Composites
• /
• 제53권3호
• /
• pp.136-140
• /
• 2018

In this study, research was conducted into the manufacture of thermally expandable microspheres for automotive underbody coatings and applications in industry. In particular, the relationship between heat resistance and the ratio of crosslinking agents and initiators in the manufacture of the thermally expandable microspheres was investigated. We focused on the results with various cross-linking agents; our aim was to make the walls of the microspheres thicker to solve the problem of reductions in size caused by shrinkage when the microspheres are heated to $T_m$ ($T_{max}$). We observed the sectional thickness and surface of the samples with thicker walls. The thick thermally expandable microspheres showed reduced shrinkage and excellent stability in spite of prolonged exposure to heat.

• KCI Concrete Journal
• /
• 제11권3호
• /
• pp.45-52
• /
• 1999

A Computer-based iterative method is provided for the calculation of minimum thickness values for one-way slabs to satisfy the maximum permissible limits given in the ACI Building Code. An algorithm includes the effects of cracking and time-dependent effects due to creep and shrinkage. Comparison of the calculated minimum thickness values with the current ACI limits is conducted to investigate limitations of the current tabulated minimum thickness. which are constant to a range of design conditions.

• 동력기계공학회지
• /
• 제2권1호
• /
• pp.80-85
• /
• 1998

Engineering plastics have been magnified its usability due to its outstanding mechanic al, electrical and chemical properties, for example, in the area of computer, electricity, electronics, automobile, camera industry. In recent, automobile speedometer system is changing from manual operation to motor operation. All plastic gears inserted by metal shaft are used In motor operated speedometer system. Therefore, in this research, experimental investigation of the shrinkage phenomenon was executed according to various inserted depth and injection conditions. In experiments, the inserted depth was controlled as 30% and 90% of the total thickness of the plastic gear. The main parameters of injection process were selected as injection pressure, holding pressure, melt temperature, injection rate. As main results, free shrinkage rate of the test part is increased about 4 times to restricted shrinkage rate and shrinkage phenomenon against all injection conditions have a trivial effect on the test parts as conventional parts.

• 한국의류학회지
• /
• 제28권11호
• /
• pp.1507-1515
• /
• 2004

Washable wool was developed using environmental-friendly spray UV-cure technique. Photocrosslinkable polymer, dextran-methacrylate, was synthesized starting from natural biopolymer, dextran. The aqueous solution of dextran-methacrylate was applied to wool fabric with various concentrations to find out the optimum condition in minimizing felting shrinkage. The wool fabric subsequently cured by 365 nm UV, The effects of UV-cure time and photoinitiator concentration on felting behavior of wool were examined. As the concentration of dextran-methacrylate increased, the felting shrinkage decreased gradually. At concentration 0.5g/ml, the felting shrinkage of wool was negligible. Other properties such as air permeability, moisture content, wrinkle recovery, thickness and wettability were also evaluated. The surface coating of dextran polymer onto wool fiber was identified by SEM.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 추계 학술논문 발표대회
• /
• pp.144-145
• /
• 2014

In the cement,that is the main materials of the panel, as to the cofired process, more than 1,300 enormous energies is consumed, in addition the greenhouse gas generated in the process of producing the cement occupies 6.3% of the country whole emission quantity. And the carbon dioxide of about 0.8 ton is the cement ejected in 1 production. Accordingly, the panel utilizing the industrial byproduct is developed. Accordingly, this research is the experiment which makes the individual size into the environment-friendly inorganic binder panel and by using the blast furnace slag, which is the industrial byproduct with the cement substitute material red mud, silica fume, and etc. looks at the dry shrinkage. The length variation in which the panel which is 450 with the dry shrinkage result of measurement, thickness 12mm, and size 450mm is the smallest was shown.

• 한국공작기계학회논문집
• /
• 제14권6호
• /
• pp.61-67
• /
• 2005

During stereolithography processes, one of the main sources of dimensional error of prototype is the distortion effect owing to the shrinkage of resin. In this study, the effects of dimension of specimen, such as length, width, and thickness, on the curl distortion is examined. During the SL processes, the variation of curl distortion ewer is measured according to the number of layers, Through this study, it is verified that there is a big difference of the distortion error in both direction and magnitude between before and after the supports are removed. It Is also observed that end profile of the test part and the upper side around the border are also distorted due to the shrinkage of the resin.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2013년도 춘계 학술논문 발표대회
• /
• pp.93-95
• /
• 2013

Recently, with the increase in the construction of ultra-high buildings and long-span structures, there is great demand for high-strength concrete which can reduce the structural weight and thickness of member sections. While developing high-strength concrete to meet performance requirements, certain issues at the design stage must also be considered. The issues include diseconomy from a great amount of per-unit cement, spalling failure by fire at ultra-high building, autogenous shrinkage caused by increased hydration activity of binder from use of a superplasticizer. Therefore, the purpose of this study is examined the strain characteristics of Fiber-reinforced-high-strength concrete(FRHSC), which differ from those of general concrete owing to autogenous shrinkage. Based on the experimental data, we proposed an autogenous shrinkage prediction model.

• Journal of the Korean Wood Science and Technology
• /
• 제37권4호
• /
• pp.293-299
• /
• 2009

섬유판을 이용한 탄화보드의 제조에 있어 무할렬 탄화법 및 탄화온도에 따른 수축률, 중량감소율 및 밀도변화에 대해 검토하였다. 섬유판을 두께별(3, 4.5, 6, 18 mm)로 준비한 후, 실험실용 탄화로를 사용하여 $400^{\circ}C{\sim}1,000^{\circ}C$의 온도조건에서 탄화보드를 제조하였다. 무할렬 탄화법은 시험편에 상하 눌림판을 설치하여 압체 탄화하는 방법을 적용하였다. 압체 탄화법에 의해 섬유판의 갈라짐과 뒤틀림 현상이 발생하지 않는 무할렬 탄화보드의 제조가 가능하였다. 탄화보드의 수축률은 길이방향 10~25%, 폭방향 12~25%, 두께방향 28~48%로 두께방향이 가장 크고 탄화온도가 상승함에 따라 커지는 경향이 나타났다. 탄화보드의 중량감소율은 섬유판의 두께에 따른 큰 차이는 나타나지 않았고 탄화온도가 상승함에 따라 커지는 경향이 나타났다. 탄화보드의 밀도는 두께 3 mm의 경질 섬유판에서 가장 컸고 탄화온도가 상승함에 따라 커지는 경향이 나타났다.

• 한국의상디자인학회지
• /
• 제21권3호
• /
• pp.1-11
• /
• 2019

This study examined the cause of the phenomenon of shrinkage in machine-embroidered fabrics, specifically those made of thin and pliable fabrics. Four woven fabrics and two knitted fabrics were selected as samples for analysis. The fabrics selected were silk organza, flax linen, polyester chiffon, cotton batiste, polyester raschel mesh, and cotton jersey. The thickness and drapability of the fabrics were observed and the shrinkage of the various types of embroidered fabrics produced using satin & step stitch techniques were measured. Moreover, the correlation between the shrinkage of the machine-embroidered fabrics and the drapability of the original fabrics was analyzed. Also, the colorfastness of six embroidery yarns was determined. The results of the study are as follows: first, the shrinkage of machine-embroidered fabrics increased at a greater rate than in embroidered knitted fabrics as compared to rates in embroidered woven fabrics. Moreover, in terms of stitch techniques, there was a greater shrinkage rate when satin stitch was applied compared to step stitch. Second, the shrinkage rate of machine-embroidered fabrics decreased when a stabilizer was fused onto the fabric. The shrinkage rate also decreased for fabrics when fused with paper stabilizer compared to those without it, and the rate decreased at a greater amount with paper stabilizer as compared to alginate film. Third, since there was a strong correlation between the shrinkage rate of the embroidered fabric and the drapability ratio of the original fabric, it was generally the case that the more pliable the fabric was, the greater the shrinkage rate was when the fabric was embroidered. Fourth, while the embroidery yarns mainly used in machine-embroidery presented an overall excellent level of colorfastness, there was slight color migration of level 4 to level 5 when using viscose rayon.