• Journal of Life Science
• /
• v.21 no.12
• /
• pp.1732-1739
• /
• 2011

This study was carried out to investigate the effect of lotus root and leaf powder on the quality characteristics of pork patty stored at $3^{\circ}C$ for 9 days. The pork patties were of four types: nothing added(control, T0), 0.5% lotus root powder added (T1), 0.25% lotus root and 0.25% lotus leaf powder added (T2), and 0.5% lotus leaf powder added (T3). The $a^*$ value tended to decrease with longer storage period (p<0.05). The $L^*$ and $a^*$ value of T3 had the lowest value among the samples, the $b^*$ value T2 and T3 were higher than those of T0 and T1 (p<0.05). Water holding capacity decreased with longer storage period (p<0.05), the water holding capacity, cooking loss, increase rate of thickness and decrease rate of diameter were not significantly different among the samples. Hardness and chewiness increased and springiness decreased with longer storage period (p<0.05). The pH creased with longer storage period (p<0.05), but the VBN content not changed during storage. The TBARS values increased with longer storage period (p<0.05), and those of T0, T1, T2 and T3 were 4.57, 1.85, 0.43 and 0.41 mg MA/kg, respectively, after 9 days of the storage. The result suggest that the addition of lotus root and leaf powder at the same time, or addition of lotus leaf powder can be applied to pork patty to its functionality.

• Journal of Life Science
• /
• v.27 no.9
• /
• pp.975-985
• /
• 2017

To investigate the beneficial effects of an agar gel mask (AGM) on UV-induced photoaging, SKH-1 hairless mice were treated with a topical application of AGM and an AGM dipped in essence (AGMdE). The mice were divided into an no radiation group, UV + AGM, UV + AGMdE, and UV + vehicle (PBS) treatment groups. Alterations in skin wrinkles, skin phenotype, histological structures, oxidative status, and toxicity were then evaluated during 4 weeks of exposure. The topical application of AGM and AGMdE inhibited wrinkle formation, suppressed the erythema index, prevented transepidermal water loss, and enhanced skin hydration. In addition, epidermal thickness recovered to a similar level as that in the no irradiation group in the UV + AGM and UV + AGMdE treatment groups compared with the UV + vehicle (distilled water) group. Furthermore, the expression levels of matrix metalloproteinase-1 (MMP-1) and tyrosinase were reduced in the UV + AGM and UV + AGMdE treatment groups, although the highest level varied. Moreover, superoxide dismutase (SOD) activity was significantly lower in the UV + AGM and UV + AGMdE treatment groups as compared with the UV + vehicle group. No significant alterations induced by most toxic compounds were measured in serum biochemical markers and liver and kidney histological features of the UV + AGM and UV + AGMdE treatment groups. These results suggest that AGM may protect against skin aging by regulating skin morphology, histopathological structures, and oxidative conditions.

• Journal of Animal Science and Technology
• /
• v.46 no.5
• /
• pp.811-820
• /
• 2004

Objectives of this study was to determine the comparisons of physico-chemical characteristics in crossbred pigs(Korean native breed ${\times}$ Landrace breed) by feeding periods. A total of 150 pigs were sampled from commercial farm, and assigned into three treatedrnents. Feeding peirods of Tl, T2 and T3 were below 200 days, 220-220 days, over 220 days, respectively. Live weight, carcass weight and backfat thickness were significantly(P<0.05) increased with feeding period increased, and final grade score have significantly(P<0.05) lower when feeding period was increased. pH and water content were significantly(P<0.05) lower when feeding period was increased(over 220days). However, intramuscular fat have no significantly different among the treatments. $L^* and b^* were significantly(P<0.05) lower and a^*$ was significantly higher(P<0.05) when feeding period increased. Cooking loss was higher in the order of Tl > T3 > T2. Shear force values was significantly(P<0.05) decreased by feed period increase. In fatty acids, myristic acid, palmitic acid, stearic acid and saturated fatty acid(SFA) in T2 were significantly(P<0.05) lower in T2, whereas linolenic acid, unsaturated fatty acid(UFA), essential fatty acid(EFA), UFA/SFA and EFA/SFA were significantly higher in T2 compared with other treatment. However palmitoleic acid and arachidonic acid were no significantly different with feeding periods. As a result of this study, crossbred pigs was increased live weight and carcass weight with feeding periods. and improved meat color and tenderness with feeding periods. However, final grade score was decreased with feeding periods

• Journal of Animal Science and Technology
• /
• v.49 no.4
• /
• pp.471-480
• /
• 2007

The aim of the present study was to determine the effects of a low-energy finisher diet on feed and growth efficiencies and carcass traits of ‘high’-market weight (MW) finishing pigs and thereby to extrapolate optimal dietary energy level for the high-MW swine. A total of 160 (Yorkshire × Landrace) × Duroc-crossbred finishing gilts and barrows weighing approximately 90 kg were fed a low-energy (3,200 kcal DE/kg) diet (LE) or control (3,400 kcal) diet (CON) ad libitum in 16 pens up to 135- and 125-kg live weights, respectively, at which the animals were slaughtered and their carcasses were analyzed [2 (sex) × 2 (diet) factorial experimental design]. Average daily gain, average daily feed intake and feed efficiency did not differ between the two sex or diet groups. Backfat thickness was less (P<0.05) in LE (22.4 mm) than in CON group (24.3 mm) in gilts, but not in barrows (24.4 ± 0.4 mm). The percentage of C- & D-grade carcasses was over 90% because of the ‘over-weight’ problem in gilts, whereas in barrows, percentages of A plus B grades and C plus D grades were 79% and 21%, respectively. The yield percentage of each trimmed primal cut per total trimmed cuts (w/w) did not differ between the two sex or diet groups. Physicochemical characteristics of longissimus muscle including color (lightness and redness), pH, drip loss and chemical composition, which overally were within the range of normal carcass, also did not differ between the two sex or diet groups. In conclusion, both LE and CON are judged to be adequate for the high-MW swine during the latter finishing period. If fat deposition of a given herd of high-MW pigs needs to be suppressed by a dietary treatment, the energy content of the diet will have to be reduced to a level lower than 3,200 kcal DE/kg.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.26 no.4
• /
• pp.211-219
• /
• 2006

The UET(ultrasound excited thermography) for the ,eat-time diagnostics of the object employs an infrared camera to image defects of the surface and subsurface which are locally heated using high-frequency putted ultrasonic excitation. The dissipation of high-power ultrasonic energy around the feces of the defects causes an increase In temperature. The defect's image appears as a hot spot (bright IR source) within a dark background field. The UET for nondestructive diagnostic and evaluation is based on the image analysis of the hot spot as a local response to ultrasonic excited heat deposition. In this paper the applicability of VET for fast imaging of defect is described. The ultrasonic energy is injected into the sample through a transducer in the vertical and horizontal directions respectively. The voltage applied to the transducer is measured by digital oscilloscope, and the waveform are compared. Measurements were performed on four kinds of materials: SUS fatigue crack specimen(thickness 14mm), PCB plate(1.8 mm), CFRP plate(3 mm) and Inconel 600 plate (1 mm). A high power ultrasonic energy with pulse durations of 250ms Is injected into the samples in the horizontal and vertical directions respectively The obtained experimental result reveals that the dissipation loss of the ultrasonic energy In the vertical injection is less than that in the horizontal direction. In the cafe or PCB, CFRP, the size of hot spot in the vortical injection if larger than that in horizontal direction. Duration time of the hot spot in the vertical direction is three times as long as that in the horizontal direction. In the case of Inconel 600 plate and SUS sample, the hot spot in the horizontal injection was detected faster than that in the vertical direction

• Korean Journal of Food Science and Technology
• /
• v.7 no.3
• /
• pp.128-134
• /
• 1975

For development of long-term storage method of sweet-persimmons using polyethylene film bags, basic experiment was conducted with 30 boxes of sweet-persimmons in 1973 and the same experiment was extended for industrial application with 2,500 boxes of the persimmons in the cold storage of Jinyoung Sweet-persimmon Association in 1974. Investigation was made on change of the quality by storage period. At the same time, persimmons put in the cold storage test were shipped to market at different time in order to monitor consumer response and commercial feasibility. The followings are conclusion obtained from the result of this experiment. 1. Storage of sweet-persimmon, Buyu, produced in Jinyoung, Kimhae was possible for 1 month at $2^{\circ}C{\pm}1^{\circ}C$ cold storage. This storage period was extended to 4 months until the end of February in case that the fruits were hermetically sealed in P.E. film bags of 0.08 to 0.1 mm thickness. 2. During the storage period of sweet-persimmons packed in the film bags, the loss of weight due to evaporation was effectively prevented with use of the film of bag thicker than 0.04 mm. 3. The storage ability of 3-5 persimmons per small bag was somewhat superior to that of many persimmons packed in the large box of 15kg capacity. 4. The thicker the film of bags, the more $CO_2$ gas was accumulated inside, however, from 1 month after beginning of the storage the rate of $CO_2$ accumulation became very low maintaining the stabilized level of 5-6% at the plot of 0.06-0.08mm thick bags. 5. While the persimmons were in storage, decreased was the content of total sugars, total acids, and vitamin C, of which the phenomenon was remarkable especially with the fruits of non-packed plot. 6. The sweet-persimmons in the film bags subjected to cold storage when shipped to market in their intact condition were more beneficial than when they were shipped out in unpacked condition. The intact fruits packed in the P.E. film bags were able to keep their commercial value for 10days in the outdoor situation. 7. The sweet-persimmons that were packed in the film bags and put in the cold storage had maintained promissing marketability and the economic feasibility was acknowledged when the experimental practice was applied to industrial scale.

• Food Science of Animal Resources
• /
• v.30 no.3
• /
• pp.495-503
• /
• 2010

Analyses were conducted to estimate the effect of quality grade on the carcass characteristics, physico-chemical and sensory traits of Longissimus dorsi in Hanwoo. A total of 42,113 carcasses were selected on the basis of five quality grades (grade $1^{++}$, $1^+$, 1, 2, and 3) and an additional 258 samples of Longissimus dorsi were used to evaluate the beef quality. The increase in quality grade from grade 3 to grade $1^{++}$ was significant (p<0.05) for carcass weight (from 338.7 kg to 387.2 kg), backfat thickness (from 7.45 mm to 12.23 mm) and marbling score (from 1.09 to 8.31). In contrast, significantly decreased levels of meat color, fat color, texture and maturity were apparent with increasing quality grade (p<0.05). Increasing quality grade was also correlated with significant increases (p<0.05) in crude fat contents (from 3.57% to 25.68%) and water holding capacity (from 52.41% to 58.03), and a decrease of the Warner-Bratzler shear force from 8.29 kg to 2.83 kg. The highest $L^*$ value (41.53) and highest cooking loss (22.11%) were observed with grade $1^{++}$ and 3 beef, respectively. There was no difference observed on $pH_{24}$ (5.53 to 5.66) among the quality grades, which were within the normal range. Sensory evaluation experiments revealed that quality grades were associated with significantly altered (all p<0.05) tenderness, juiciness, flavor, and overall acceptability. The crude fat contents showed significant correlation with juiciness (r=0.59), tenderness (r=0.71), flavor (r=0.55), and overall acceptability (r=0.69). The lower sensory trait scores were related to higher WBs. Grade $1^+$ Hanwoo beef had a significantly higher WBs and lower fat contents when compared to grade $1^{++}$ Hanwoo beef (p<0.05).

• ANNALS OF ANIMAL RESOURCE SCIENCES
• /
• v.29 no.4
• /
• pp.172-182
• /
• 2018

The present study was undertaken to examine if the carcass and pork quality of finishing pigs reared on a low plane of nutrition (LPN) could be improved compared with that of the pigs finished on a high plane of nutrition (HPN). Sixty-eight crossbred (LYD) barrows and 68 LYD gilts weighing approximately 50 kg were fed a diet containing 3.54 Mcal DE/kg with 1.00% lysine (HPN) or 3.02 Mcal DE/kg with 0.68% lysine (LPN) in eight pens up to approximately 120 kg and slaughtered. The belly, loin, ham, and Boston butt were cut out from a total of 20 carcasses, after which physicochemical and sensory quality attributes of the belly and the representative muscle of each of the loin, ham, and Boston butt were evaluated. The ADG, gain:feed ratio, and backfat thickness were less for LPN than for HPN (p<0.05). The cooking loss, hardness, and chewiness values for the Boston butt were less for LPN vs. HPN. In sensory evaluation for fresh meat (muscle), the subjective quality scores were greater for LPN vs. HPN in color, marbling, and acceptability for the loin, the muscle:fat balance score for the belly tending to be greater for LPN (p<0.10). In addition, LPN was superior to HPN in the flavor and juiciness in sensory evaluation for cooked ham. In conclusion, the present results suggest that the carcass and pork quality of finishing pigs could be improved with reduced growth performance by using LPN.

• Korean Journal of Heritage: History & Science
• /
• v.51 no.4
• /
• pp.108-119
• /
• 2018

"The Collection of Yi Chungmugong" manuscript is a hand-written manuscript of the volume 1 consisting of the Collection, published in 1795 and it seems to have completed the contents of the book by correcting the first part of the book before print. The book adopted a form of Seonjangbon(線裝本) of Ochimanjeongbeop(五針眼訂法) and was urgently needed some measures to preserve because it has been much damaged by stains, loss and oxidation due to moisture on the bottom of it. In addition, a scientific investigation was applied to find out the features of the quality of paper and fiber used for the book, which would be reflected in the process of the preservation. The characteristics of paper were measurmented for size(cm), thickness(mm), weight(g), basis weight($g/m^2$), density($g/cm^3$), chain line and laid lines($3{\times}3cm$). The measurement showed that the characteristics of paper used in royal books published in the late Joseon Dynasty. For the paper-fiber of the book, C stain was used and the technique revealed that the book is made of bast fibre of paper mulberry and its binding strings are cotton. SEM-EDS analysis was performed to verify the existence of additives in paper. As a result of the analysis, The crystallized calcium was detected in addition to the main components carbon(C) and oxygen(O). This artifact is the unique final version of "The collection of Yi Chungmugong", which has considerable value in terms of academic research, besides it helps to understand how to print books of Joseon Dynasty. And it also has a very accurate information of when and where the book was made, which primarily could be resources to conserve and restore for other book heritage.

• The Korean Journal of Nuclear Medicine
• /
• v.38 no.3
• /
• pp.259-267
• /
• 2004

Purpose: NEMA NU2-2001 was proposed as a new standard for performance evaluation of whole body PET scanners. in this study, system performance of Siemens CTI ECAT EXACT 47 PET scanner including spatial resolution, sensitivity, scatter fraction, and count rate performance in 2D and 3D mode was evaluated using this new standard method. Methods: ECAT EXACT 47 is a BGO crystal based PET scanner and covers an axial field of view (FOV) of 16.2 cm. Retractable septa allow 2D and 3D data acquisition. All the PET data were acquired according to the NEMA NU2-2001 protocols (coincidence window: 12 ns, energy window: $250{\sim}650$ keV). For the spatial resolution measurement, F-18 point source was placed at the center of the axial FOV((a) x=0, and y=1, (b)x=0, and y=10, (c)x=70, and y=0cm) and a position one fourth of the axial FOV from the center ((a) x=0, and y=1, (b)x=0, and y=10, (c)x=10, and y=0cm). In this case, x and y are transaxial horizontal and vertical, and z is the scanner's axial direction. Images were reconstructed using FBP with ramp filter without any post processing. To measure the system sensitivity, NEMA sensitivity phantom filled with F-18 solution and surrounded by $1{\sim}5$ aluminum sleeves were scanned at the center of transaxial FOV and 10 cm offset from the center. Attenuation free values of sensitivity wire estimated by extrapolating data to the zero wall thickness. NEMA scatter phantom with length of 70 cm was filled with F-18 or C-11solution (2D: 2,900 MBq, 3D: 407 MBq), and coincidence count rates wire measured for 7 half-lives to obtain noise equivalent count rate (MECR) and scatter fraction. We confirmed that dead time loss of the last flame were below 1%. Scatter fraction was estimated by averaging the true to background (staffer+random) ratios of last 3 frames in which the fractions of random rate art negligibly small. Results: Axial and transverse resolutions at 1cm offset from the center were 0.62 and 0.66 cm (FBP in 2D and 3D), and 0.67 and 0.69 cm (FBP in 2D and 3D). Axial, transverse radial, and transverse tangential resolutions at 10cm offset from the center were 0.72 and 0.68 cm (FBP in 2D and 3D), 0.63 and 0.66 cm (FBP in 2D and 3D), and 0.72 and 0.66 cm (FBP in 2D and 3D). Sensitivity values were 708.6 (2D), 2931.3 (3D) counts/sec/MBq at the center and 728.7 (2D, 3398.2 (3D) counts/sec/MBq at 10 cm offset from the center. Scatter fractions were 0.19 (2D) and 0.49 (3D). Peak true count rate and NECR were 64.0 kcps at 40.1 kBq/mL and 49.6 kcps at 40.1 kBq/mL in 2D and 53.7 kcps at 4.76 kBq/mL and 26.4 kcps at 4.47 kBq/mL in 3D. Conclusion: Information about the performance of CTI ECAT EXACT 47 PET scanner reported in this study will be useful for the quantitative analysis of data and determination of optimal image acquisition protocols using this widely used scanner for clinical and research purposes.