• 한국안전학회지
• /
• 제32권3호
• /
• pp.41-47
• /
• 2017

Recent studies have shown that there are various systems which can be used to monitor hazardous area in a debris flow location, but lack of methodological research on the exact location where each instrument should be installed has hindered the success of this systems. The objective of this study is to suggest the measurement system for monitoring debris-flow and propose the effective method to determine location of measurement system. Previously studied, from 1991 to 2015, were referred and the applied ratio of every instrument was investigated. The measurement information was divided into 8 categories including rainfall, debris-flow velocity, displacement, fluid pore pressure, ground vibration, image processing, impact force and peak flow depth. The result of this study revealed that the most applied instruments to be rain gauge and geophone for measuring average rainfall and ground vibration respectively. The Analytic Hierarchical Process (AHP) method was selected to determine installation location of instrument and the weighting factors were estimated through fine content, soil thickness, porosity, shear strength, elastic modulus, hydraulic conductivity and saturation. The soil thickness shows highest weights and the fine content relatively demonstrates lowest weights. The score of each position can be calculated through the weighting factors and the lowest score position can be judged as the weak point. The weak point denotes the easily affecting area and thus, the point is suitable for installing the measurement system. This study suggests a better method for safely managing the debris-flow through a precise location for installing measurement system.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2005년도 추계 학술논문 발표대회
• /
• pp.17-20
• /
• 2005

This study investigates mock-up test of the concrete containing crushed sands with improved quality and following could be draws as conclusions. The slump satisfies the target value. The air content reaches the goal, however, it decreases by the occurrence of loss with elagse of age. In normal strength region, the setting time of CS24 member is shorter than that of SS24 member. In high strength region, the setting time of SS50 member is make only slower than that of CS5O because of the use of retarding AE agent. The compressive strength of the concrete using crushed sands is little higher than the concrete using washed sea sands, and the compressive strength of core sample increases at lower part. Drying shrinkage of the concrete using crushed sands is larger than that using washed sea sands. At water caring condition, both the concrete using crushed sands and using washed sands expand at first, exhibit to be swelled and with elagse of age, they remain relatirely constant. Also, the drying shrinkage occurred greatly when the width and thickness of a member are small because it is easy to evaporate the inner part vapor in the small width and thickness of a member. there can be little different according to the location of a contact gauge, however it is similar to the change of specimen's length change. The concrete using crushed sands, of which grading, grain shape and fine particle is improved, are comparable to the quality of the concrete using washed sea sand.

• 한국해양환경ㆍ에너지학회지
• /
• 제5권4호
• /
• pp.63-73
• /
• 2002

본 논문은 1988년 2원에 포항 앞바다에서 침몰한 총톤수 995톤의 유조선 경신호에 대한 수중 조사 작업과 그 결과를 다루고 있다. 조사는 경신호에 의한 추가 해양오염가능성을 파악하기 위하여 2001년 9원에 약 10일간의 일정으로 수행되었으며 첨단 해양조사장비인 ROV와 유인잠수정, 초음파 투께 계측장치 등을 이용하여 선체상태와 기름의 유출상황, 선체외판의 부식상태 통을 조사하였다. 조사 결과, 선체에서 계속적으로 소량의 기름이 유출되고 있는 것으로 확인되었으며 선체의 부식 상태 조사를 위해 선체의 일부에서 선체 두께 측정이 이루어졌다. 조사 결과와 기존 사고 보고서의 내용을 바탕으로 잔존유의 양을 추정하였을 때, 조사당시 선체에는 약 600㎘의 기금이 잔존하고 있는 것으로 추정되었으며 향후 선체외판의 부식으로 인해 잔존유가 추가 유출될 가능성이 있는 것으로 판단되었다 이와 함께 유출유 확산 예측시뮬레이션을 통해 특정한 기상상태에서는 유출된 기름이 주변해역을 오염시킬 수 있는 가능성을 확인하였다.

• 대한치과보철학회지
• /
• 제41권3호
• /
• pp.342-350
• /
• 2003

Statement of problem. Titanium-Nickel alloy might be used in various prosthetic restorations since it has a unique property such as super-elasticity and high fatigue resistance. However, little is known about the casting ability of this alloy. Purpose. This in vitro study compared the casting accuracy and the porosity made with different investments and various sprue designs to ascertain what casting condition would be better for the fabrication of Ti-Ni cast restorations. Material and methods. A total of 70 Ti-Ni alloy crowns were made and divided into 7 groups of 10 copings on a metal master die. For measuring the effect of the sprue numbers, two groups with one and two 8-gauge sprues were compared. Moreover, the results of the conventional sprue and the double thickness sprues were compared. Three investments were used; carbon free phosphate bonded investment, titanium investment and gypsum bonded investment. The cast restorations were evaluated at 48 points on the entire circumferential margin with a stereomicroscope measuring in micrometers. Each crown was radiographically examined for casting defects and porosity. Data on casting accuracy were analyzed using two-way and Post hoc Scheffe's comparison to determine whether significant differences existed at the 95% confidence level. Student-Newman-Keuls test were performed to identify significant differences in the number of voids. Results. The double sprueing group and double thickness group had significantly less marginal discrepancy than the single sprueing group (P<.05 and P<.01, respectively). The castings with phosphate bonded investment showed the least marginal discrepancy and the smoothest surface. The castings invested in the gypsum bonded investment had the greatest gaps in margin and the largest failure rate. The double sprueing group and phosphate bonded investment group had significantly smaller void numbers and smaller void size than the other groups. Conclusion. Within the limitations of this in vitro study, the casting accuracy of the groups using thicker, double sprue design and the phosphate bonded investment was significantly superior. Moreover, void number and size were less than other groups.

• 한국전문물리치료학회지
• /
• 제20권4호
• /
• pp.65-72
• /
• 2013

The purpose of the current study was to determine the intra- and inter-rater reliability of muscle thickness (MT) measurement of the psoas major (PM) using ultrasonography (US) conducted at different inward pressures of approximately .5 kg, 1.0 kg, 1.5 kg, and 2.0 kg. Twelve healthy male subjects were recruited for the study. The thicknesses of both PMs of each subject were measured by two different examiners in a random manner to assess the intra- and inter-rater reliability. The measurement values were analyzed using the intra-class correlation coefficient (ICC) with a 95% confidence interval (CI). ICC (2,1) was used to determine the inter-rater reliability and ICC (3,1) was used to assess the intra-rater reliability of the MT measurement of the PM. The results indicated higher ICC values for intra-rater reliability compared to inter-rater reliability. In addition, the value for intra-rater reliability with .5 kg inward pressure [ICC=.99 (95%CI=.98~.99)] was higher compared to 1.0 kg, 1.5 kg, and 2.0 kg. Other inward pressures for intra- and inter-rater reliability in current study were also demonstrated to have excellent values (ICC=.94~.99). These findings showed that maintaining consistent inward pressure is essential for maintaining reliability of the results when the MT of the PM is measured by different examiners in a clinical setting.

• 한국기계가공학회지
• /
• 제17권5호
• /
• pp.64-69
• /
• 2018

Clear aligners are popular in the field of dental orthodontic treatment because they offer a discreet alternative to braces due to their use of transparent materials. They are formed from flat transparent polymer materials by hot pressed molding. It is necessary to know the mechanical properties of the polymer materials to be able to form the exact shapes of the clear aligners. However, this information is not publicly available. In this study, we present a method to reliably measure the mechanical properties of clear aligner polymer materials and analyze the factors effecting these mechanical properties. First, we surveyed standards related to the mechanical properties of polymer materials to obtain reliable data. Consequently, ISO 527 was selected for use in this study because of the size and thickness of the flat transparent polymer material. The uniaxial tensile tester was constructed and it was verified whether displacement of a crosshead could be regarded as a displacement of gauge-length by optical analysis. Uniaxial tensile tests of three thicknesses from three different companies were performed and each engineering stress-strain curve was measured. Tensile strengths and elastic moduli were obtained by analysis of the stress-strain curves. The tensile strength and elastic modulus of ISO 527 was found to be approximately 50MPa and 2.3GPa, respectively. Both values showed material and thickness dependency.

• 한국의상디자인학회지
• /
• 제24권2호
• /
• pp.1-10
• /
• 2022

The purpose of this study is to analyze the structural properties of 100% wool fabrics knitted with various stitch types and to evaluate dimensional stability from shrinkage in wet cleaning and drying. Materials were weft-knitted from twenty-four different stitches with 7 gauge using a computerized flatbed knitting machine. Weight, thickness, density, and length were measured. A domestic washing machine and a tumble dryer were used for the shrinkage test. The results are as follows: Knitted fabrics were divided into 3 groups based on weight per unit area. Porous knits show light weight whilst milano, pintuck, rib stitches belong to the heaviest group. A positive correlation between weight and thickness was found and the same result was obtained for wale density and weight. Dimensional shrinkage of knitted fabrics was increased during repetitive wet cleaning and drying regardless of knit stitches. Especially, fabrics knitted with float, tuck, cable, and links & links stitches samples were contracted more than 15% in the first treatment whereas 2x1 rib stitch showed 1% shrinkage rate. Fisherman and milano stitches contracted in both course and wale direction with similar shrinkage rates. However, porous knits with float and tuck stitches shrank in course direction by 20% as well as cable samples contracted from 5% to 20% after repeated washing and drying. On the other hand, 30% and 15% contraction of wale direction occurred in orderly float and links & links stitches, respectively. Machine dried knits have a higher shrinkage rate than air-dried knits, but the drying method did not affect to the direction of contraction. In conclusion, variations of knit, tuck, and float stitches affect knit construction and dimensional stability from shrinkage in wet cleaning and drying of wool knitted fabrics.

• Restorative Dentistry and Endodontics
• /
• 제32권1호
• /
• pp.37-46
• /
• 2007

C-shape 근관은 주로 하악 제 2대구치에서 보이는 해부학적 변이 형태로서, 그 특징은 각 근관을 연결하는 fin이나 web이 존재한다. 이런 해부학적으로 복잡함은 근관치료시에 세정과 성형 및 근관충전을 방해하며, 과다한 기구 조작시에 뜻하지 않는 천공을 유발하기도 한다. 이 연구의 목적은 C-shape 치근을 가진 하악 제2 대구치의 해부학적인 형태와 치근의 위치에 따른 최소 근관벽 두께에 대하여 연구하고자 하였다. 발거된 하악 대구치중 C-shape 치근을 가진 치아를 30개 선별하여 방사선 사진 및 협측, 설측, 치근단 부위를 디지털 카메라를 이용하여 촬영하였다. 자가 중합형 교정용 레진 (Orthodontics resin, Densply/Caulk, U.S.A)을 이용하여 치관부를 제거한 치아를 매몰한 후 각각의 시편을 Accutom-50 (Struers, Denmark)에 고정시켜 1 mm 간격으로 절단, 연마한 다음 절단면을 수술용현미경에 연결된 디지털 카메라 (Coolpix 995, Nikon, Tokyo, Japan)를 이용하여 각각의 상을 촬영하였다. 30개 치아에서 촬영한 197개의 치아단면을 Root thickness gauge program을 이용하여 근관형태의 변화를 분류하고 부위별 근관과 치아외벽 사이에 존재하는 상아질의 최소두께에 대해 연구 분석하였다. 1. 근관입구에서 C I이 가장 많이 (73%) 관찰되었으나 치근단부로 갈수록 근관 형태의 다양한 변화를 보여 C II와 C III의 근관형태가 많이 관찰되었으며, 11 개의 (36%)치아에서는 근관입구에서 치근단부까지 근관형태의 변화를 보이지 않았다. 근관입구에서 단지 2개의 치아에서 나타난 C III type은 치근단부로 갈수록 높은 발현빈도를 나타내었다. 2. C-shape 근관은 근관입구 부위에서는 continuous 나 semicolon canal을 가지나 치근단부로 갈수록 2개나 3개의 근관을 갖는 경우가 많다. 3.평균적인 근관과 치질사이의 최소거리는 근첨부의 설측부위에서 나타났다.

• 한국전기전자재료학회논문지
• /
• 제14권6호
• /
• pp.470-474
• /
• 2001

This paper describes the fabrication and characteristics of CrN thin-film type pressure sensors, in which the sensing elements were deposited on SuS. 630 diaphragm by DC reactive magnetron sputtering in an argon-nitride atmosphere(Ar-(10%)N$_2$). The optimized condition of CrN thin-film sensing elements was thickness range of 3500$\AA$ and annealing condition(300$\^{C}$, 3 hr) in Ar-10%N$_2$ deposition atmosphere. Under optimum conditions, the CrN thin-films for strain gauges is obtained a high resistivity, ρ=1147.65 $\mu$Ωcm, a low temperature coefficient of resistance, TCR=186ppm/$\^{C}$ and a high temporal stability with a good longitudinal, 11.17. The output sensitivity of fabricated CrN thin-film type pressure sensors is 2.36 mV/V, 4∼20nA and the maximum non-linearity is 0.4%FS and hysteresis is less than 0.2%FS.

• 대한기계학회논문집A
• /
• 제20권7호
• /
• pp.2257-2265
• /
• 1996

In the cold rolling mill, it is very important that a constrained static flow stress of rolled strip and rolling force calculation model be exactly considered to improve an prediction accuracy for rolling forces. Therefore, in this study, the values of the constrained static flow stress are used by deriving the regression equation which is a function of rolling conditions(FDT, CT) and chemical compositions(C, Si, Mn), previously applied by making the tables of yield strength for hot coils with size. And with the consideration that an elastic deformation part of an rolled strip appears at the entry and delivery side of the contacting area between the work roll and rolled strip is calculated. By applying these methods, the more accurate prediction for rolling force is obtained. As a results, the deviation of thickness is significantly reduced in the rolling direction.