1 |
JK Park, CM Jeong, YC Jeon The effect of sprue design on the marginal reproducibility of cast titanium crowns. J Korean Acad Prosthodont 2002;40:352-63
|
2 |
Takahashi J, Kimura H, Lautenschlager EP, Chern Lin JH, Moser JB, Greener EH. Casting pure titanium into commercial phosphate-bonded SiO2 investment molds. J Dent Res. 1990;69:1800-5
DOI
PUBMED
ScienceOn
|
3 |
Watanabe K, Hamanaka H, Doi H, Miura I. Dental casting of Ni-Ti alloys. Part I. Mechanical properties and microstructure. J Dent Mater 1983;2:515-24
|
4 |
Inoue T, Inoue A, Asai M, Komasa Y. Fit and dimensional changes of cast CP titanium crowns fabricated using sintered molds. Dent Mater J. 2001;20:195-205
DOI
PUBMED
ScienceOn
|
5 |
Hruska AR, Borelli P. Quality criteria for pure titanium casting, laboratory soldering, intraoral welding, and a device to aid in making uncontaminated castings. J Prosthet Dent. 1991;66:561-5
DOI
ScienceOn
|
6 |
Takahashi M, Kikuchi M, Takada Y, Okuno O. Mechanical properties and microstructures of dental cast Ti-Ag and Ti-Cu alloys. Dent Mater J. 2002;21:270-80
DOI
PUBMED
ScienceOn
|
7 |
Luo XP, Guo TW, Ou YG, Liu Q. Titanium casting into phosphate bonded investment with zirconite. Dent Mater. 2002;18:512-5
DOI
ScienceOn
|
8 |
Groten M, Axmann D, Probster L, Weber H. Determination of the minimum number of marginal gap measurements required for practical in-vitro testing. J Prosthet Dent. 2000;83:40-9
DOI
ScienceOn
|
9 |
Al-Mesrnar HS, Morgano SM, Mark LE. Investigation of the effect of three sprue design on the porosity and the completeness of titanium cast RPD framework. J Prosthet Dent 1999;82:15-21
DOI
ScienceOn
|
10 |
Ryge G, Kozak K, Fairhurst CW. Porosities in dental gold casting. J Am Dent Assoc 1957;54:746-54
DOI
PUBMED
|
11 |
Mori T, Jean-Louis M, Yabugarni M, Togaya T. The effect of investment type on the fit of cast titanium crowns. Aust Dent J. 1994;39:348-52
DOI
ScienceOn
|
12 |
Syverud M, Here H. Mold filling of Ti castings using investments with different gas permeability. Dent Mater. 1995;11:14-8
DOI
ScienceOn
|
13 |
Hero H, Syverud M, Waarli M. Mold filling and porosity in castings of titanium. Dent Mater. 1993;9:15-8
DOI
ScienceOn
|
14 |
Preston JD, Berger R. Some laboratory variables affecting ceramo-metal alloys. Dent Gin North Am 1977;21:717-28
|
15 |
Curry TS, Dowdy JE, Murry RC. Christensens Physics of Diagnostic Radiology. 4th ed. Pennsylvania: Lea & Febiger; 1990. p.70-87
|
16 |
Wang RR, Boyle AM. A simple method for inspection of porosity in titanium castings. J Prosthet Dent 1993;70:275-6
DOI
ScienceOn
|
17 |
Chai TI, Stein RS. Porosity and accuracy of multiple unit titanium castings. J Prosthet Dent 1995;73:534-41
DOI
ScienceOn
|
18 |
Chan D, Lachman R Kaiser D, Chung K. The effect of sprue design on the marginal accuracy of titanium castings. J Oral Rehabil 1998;25:424-9
DOI
ScienceOn
|
19 |
Sunnerkrantz PA, Syverud M, Hero H. Effect of casting atmosphere on the quality of Ti-crowns. Scand J Dent Res. 1990;98:268-72
PUBMED
|
20 |
Blackman R, Barghi N, Tran C. Dimensional changes in casting titanium removable partial denture frameworks. J Prosthet Dent 1991;65:309-15
DOI
ScienceOn
|
21 |
Kotake M. Retention of superelastic Ti-Ni alloy cast clasps. J Dent Mater 1994;13:459-66
|
22 |
Zinellis S. Effect of pressure of helium, argon, krypton, and xenon on the porosity, microstructure, and mechanical properties of commercially pure titanium castings. J Prosthet Dent 2000;84:575-582)
DOI
PUBMED
ScienceOn
|
23 |
Castleman LS, Motzkin SM, Alicandri FP, Bonawit VL, Johns AA. Biocompatibility of nitinol alloy as an implant material. J Biomed Mater Res 1976;10:695-731
DOI
ScienceOn
|
24 |
Speck KM, Fraker AC. Anodic polarization behavior of Ti-Ni and Ti-6Al-4V in simulated physiological solutions. J Dent Res 1980;59:1590-5
DOI
PUBMED
ScienceOn
|
25 |
Strickland WD, Sturdevant CM, Hill NC. Porosity in the full cast crown. JAm Dent Assoc 1959;58:448
|