• Composites Research
• /
• v.18 no.2
• /
• pp.20-29
• /
• 2005

To evaluate the flexural deformation and strength of composite motor case above the glass transition temperature$(T_g),\;170^{\circ}C$, of resin material, a finite element analysis(FEA) model in which material non-linearity and progressive failure mode were considered was proposed. The laminated flexural specimens which have the same lay-up and thickness as the composite motor case were tested by 4-point bending test to verify the validity of FEA model. Also. mechanical properties in high temperature were evaluated to obtain the input values for FEA. Because the material properties related to resin material were highly deteriorated in the temperature range beyond $T_g$, the flexural stiffness and strength of laminated flexural specimen in $200^{\circ}C$ were degraded by also $70\%\;and\;80\%$ in comparison with normal temperature results. Above $T_g$, the failure mode was changed from progressive failure mode initiated by matrix cracking at $90^{\circ}$ ply in bottom side and terminated by delamination at the center line of specimen to fiber compressive breakage mode at top side. From stress analysis, the progressive failure mechanism was well verified and the predicted bending stiffness and strength showed a good agreement with the test results.

• Journal of the Korean Society of Radiology
• /
• v.13 no.7
• /
• pp.1015-1024
• /
• 2019

In the medical field, X-rays are essential in the diagnosis and treatment of diseases, and the use of X-rays continues to increase with the development of imaging technology, but X-rays have the disadvantage of radiation exposure. Although lead protection tools are used in clinical practice to protect against radiation exposure, lead is classified as a heavy metal and can cause harmful reactions such as lead poisoning. Therefore, the purpose of this study is to investigate the usefulness of the shield fabricated using materials of FDM (Fused Deposition Modeling) 3D printer. In order to confirm the filament's line attenuation factor, phantoms were fabricated using PLA, XT-CF20, Wood, Glow and Brass, and CT scan was performed. And the shielding sheet of 100 × 100 × 2 mm size was modeled, the dose and shielding rate was measured by using a diagnostic X-ray generator and irradiation dose meter, and the shielding rate with lead protection tools. As a result of the experiment, the CT number of the brass was measured to be the highest, and the shielding sheet was manufactured by using the brass. As a result of confirming with the diagnostic X-ray generator, the shielding rate was increased in the shielding sheet having a thickness of 6 mm upon X-ray irradiation under the condition of 100 kV and 40 mAs. It measured by 90% or more, and confirmed that the shielding rate is higher than apron 0.25 mmPb. As a result of this study, it was confirmed that the shield fabricated by 3D printing technology showed high shielding rate in the diagnostic X-ray region. there was.

• Journal of the Korean Wood Science and Technology
• /
• v.41 no.4
• /
• pp.293-301
• /
• 2013

This study discusses the feasibility of coffee bean residue as a raw material of medium-density fiberboard (MDF). In this relation, the effect of coffee bean residue known as an absorbent material on the physical and mechanical properties of MDF manufactured at its different addition level. Coffee bean residue which is a by-product of coffee mill and large amount of waste left over after processing for instant coffee was added at the level of 3, 6, and 9% on dry basis and urea formaldehyde resin was used as the adhesive. The MDF made with mixture of wood fiber and coffee bean residue was tested for physical and mechanical properties as well as formaldehyde emission. The bending strength and internal bonding strength of the MDF made with mixture of wood fiber-coffee bean residue were higher than that of the KS standard in randomized mat structure type, but not in layered mat structure type. Also, the physical properties of MDF made with mixture of wood fiber-coffee bean residue showed a considerable improvement in thickness swelling over the commercial MDF. More importantly, the formaldehyde emission rate of MDF made with mixture of wood fiber-coffee bean residue met the KS standard and was close to that of commercial MDF. These results showed the feasibility of coffee bean residue as a raw material for the production of environmentally-friendly MDF. Additional works on adhesive-coffee bean compatibility, improvement of moisture absorption effect and reduction the formaldehyde emission rate by carbonization of coffee bean residue may be required.

• Science of Emotion and Sensibility
• /
• v.14 no.3
• /
• pp.385-394
• /
• 2011

The purpose of this research is to compare and analyze visual images between the Real garment and the 3D garment simulation with the various fabrics of flare skirts and to analyze the correlation between mechanical properties and visual images. The picture images (printed on paper) of the Real garment and the 3D garment simulation of experimental flare skirts were shown to the evaluation group of women in their 20s majoring in clothing and textiles, and were evaluated by questionnaires with 32 adjectives. SPSS Version 12.0 statistics program was utilized to analyze data. Factor analysis, One Way ANOVA, T-test and Duncan test were used to investigate visual effect of the Real garment and the 3D garment simulation. As the result of conducting factor analysis on the visual appearance, the images were driven with five factors: 'drapeability', 'attractive', 'body compensation', 'bulkiness', 'activeness'. Visual images were significantly related with mechanical properties of various fabrics, and the visual images between 3D garment simulations and real garment differed with various fabrics and their mechanical properties. Visual images of silk and polyester group, cotton, linen and wool group were significantly related with weight and thickness of kinds of fabrics.

• Science of Emotion and Sensibility
• /
• v.13 no.2
• /
• pp.327-336
• /
• 2010

The purposes of this study are to evaluate mechanical properties and sensibility of tencel jacquard fabrics treated with ginkgo biloba extract and silicon softener, and to contribute to the research and development of the bedclothes made of the tencel jacquard fabrics. Mechanical properties and objective fabric hand evaluation were measured by using KES-FB system. Subjective sensibilities such as sensory, touch, and purchasing preference were estimated by using blind field test. The tensile properties such as EM, WT, and RT of tencel jacquard fabrics treated with ginkgo biloba extract and silicon softener showed increase. Bending properties and shear properties were decreased, but compression properties were increased compared to untreated fabric. With ginkgo biloba extract and silicon softener treatment, thickness and weight were increased. Therefore, tencel jacquard fabrics became more stretchable, softer, and bulkier than untreated fabrics. Consequently, THV of tencel jacquard fabrics treated with ginkgo biloba extract and silicon softener were increased. When fabrics were treated sequentially with ginkgo biloba extract and silicon softener, fabrics were estimated softer, more flexible, and bulkier than untreated fabrics. Also, tencel jacquard fabrics treated with ginkgo biloba extract and silicon softener were estimated to have good touch and preference.

• Journal of the Korean Society of Food Culture
• /
• v.3 no.3
• /
• pp.309-317
• /
• 1988

The effects of $CaCl_2$, K-sorbate, and fermented fish sauces and blanching on the texture of Chinese cabbage of Kimchi were evaluated. The addition of salt-fermented shrimp or salt-fermented anchovy accelerated the pH reduction, acidity increase and reducing sugar consumption, but K-sorbate, Ca-chloride and blanching suppressed the ripening process of Kimchi. The latter retarded the softening rate of Chinese cabbage during Kimchi fermentation, as demonstrated by the cutting force, compression force, recovered height and work ratio. The sensory evaluation confirmed the results of instrumental texture measurments. The instrumental measurements, i.e. pH, acidity cutting thickness, cutting force and compression test parameters, showed acidity acidity was calculated as % lactic acid attributes, i.e. the preferences for taste, appearance and texture, and the level of crispiness, hardness, chewiness and fibrousness. The pH of Kimchi was appeared to be an important quality parameter, whiih had significant correlations with the taste, appearance, chewiness, hardness, fibrousness and crispiness.

• The Journal of the Korea Contents Association
• /
• v.11 no.12
• /
• pp.814-821
• /
• 2011

The purpose of this study was to evaluate of resolution parameter and reconstitution filter in the 256 multi detector computed tomography(MDCT) by using the head phantom. We used 256 MDCT, and head phantom of philips system. We evaluated to image quality by using Extended Brilliance Workspace. The protocol were axial scan method with 120 kVp, 0.5 sec of rotation time, 5 mm of slice thickness and increment, 250 mm of field of view(FOV), $512{\times}512$ of matrix size, 1.0 of pitch, $128{\times}0.625$ mm of collimations. The resolution parameter was applied for 'Standard', 'High' and 'Ultrahigh'. The reconstitution filters were changed to seven type of 'A', 'B', 'C', 'D', 'UA', 'UB', 'UC'. The assesment factors of image quality were the uniformity, the noise, the linearity and 50% and 10% of the modulation transfer function(MTF). Finally The good image quality in 'High' resolution parameter showed at the uniformity, the linearity and 50% and 10% of MTF. The 'UA', 'UB' reconstitution filter showed at the good image quality of the uniformity and the noise and 'C' reconstitution filter showed at the same result of the linearity and 50% and 10% of MTF.

• The Journal of the Korea Contents Association
• /
• v.13 no.3
• /
• pp.204-210
• /
• 2013

The patients who had been operated total mastectomy are different from general women in their breasts thickness due to breast surgery. As a result, digital chest image from total mastectomy patients will be different attenuation. The main objective for this study is to show that a proper Ion chamber standard combination measuring MTF which is objective basis for Digital image, when be x-ray for total mastectomy patient. We have designed the unique number that shown Left is 1, Right is 2, Center is 3 and have put the edge phantom on detector ion chamber. Lastly, we have obtained experiment images. The evaluations of all image quality have measured by 50% MTF of spatial resolution and absorption dose using Matlab(R2007a). The result showed that average exposure condition, MTF value, absorption dose for 1+3 and 2+3 combinations were 2.745 mAs, 1.925 lp/mm, 0.688 mGy. Consequently, that showed high MTF, DQE and low dose than other combinations. Therefore, a proper changes of ion chambers are able to improve image quality and to reduce radiation exposure when be X-ray for total mastectomy patients. Also, it will be possible to standard for application chamber combination and utilization on clinical detection.

• Asian-Australasian Journal of Animal Sciences
• /
• v.23 no.8
• /
• pp.1028-1033
• /
• 2010

The effects of delta-aminolevulinic acid (DALA) or chito-oligosaccharide (COS) in layer diets on production performance, egg quality and hematological characteristics were investigated in this 8-week trial. Two hundred and seventy 27-week-old (Hy-Line brown) layers were randomly assigned to 5 treatments with 9 replications per treatment. Dietary treatments were i) Control (basal diet); ii) DALA1 (basal diet+DALA 2 mg/kg); iii) DALA2 (basal diet+DALA 4 mg/kg); iv) COS1 (basal diet+COS 100 mg/kg) and v) COS2 (basal diet+COS 200 mg/kg). In this study, no significant difference was observed in feed intake and egg shell quality (eggshell breaking strength and egg shell thickness) among treatments. The inclusion of DALA increased egg production during the first 4 weeks. Egg weight was increased in both DALA (quadratic, p<0.05) and COS (linear, p<0.05) treatments compared with the control treatment. Laying hens fed the DALA treatment had an increased yolk color unit (quadratic, p<0.05) and haugh unit (linear, p<0.05) compared with the control group. Similarly, these characteristics were also affected by COS treatments, with both values being linearly increased (p<0.05) in COS treatments compared with the control treatment. Additionally, birds fed DALA treatments significantly increased (quadratic, p<0.05) the number of RBC, WBC and lymphocytes compared with the control treatment. Dietary DALA supplementation linearly increased (p<0.05) the serum iron concentration at the end of the 8th week. The inclusion of COS increased (linear, p<0.05) the concentration of RBC, WBC and lymphocytes compared with the control treatment. In conclusion, dietary DALA at the lower dosage (2 mg/kg) could exert better effects in laying hens than higher dosage (4 mg/kg). Birds fed DALA supplemented diet had an increased iron availability, egg weight, eggshell quality and immunity. Moreover, the inclusion of COS (200 mg/kg) can increase egg weight, eggshell quality and immunity in laying hens. Therefore, both the utilization of COS and DALA could be considered as a new strategy for optimizing egg quality and health condition of laying hens.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.6
• /
• pp.677-686
• /
• 2006

This study was the effectiveness of two downflow BAF(Biological Aerated Filter) systems at conventional water treatment system. A BAF reactor placed in front of coagulation and sedimentation tanks(Mode A) and after coagulation and sedimentation tanks(Mode B) that were compared in terms of removal of suspended particles, organic matters, and ammonia nitrogen. The suspended particles removal efficiency was over 80% for both Mode A and B, although Mode A gave slightly better results. $BOD_5$ removal and nitrification efficiencies were more than 90% for both reactor. The organic matter and ammonia removals were also superior in the Mode A. The biofilm thickness and biomass increased as increment of EBCT and the upper part of reactor more about 30% than lower part. The specific oxygen uptake rate(SOUR) was higher the upper part of reactor and Mode A than the lower part of reactor and Mode B. A cost analysis showed that the Mode A system was more cost effectiveness. It could save the coagulant dose by about 67% and the chlorine demand by about 95%. The ideal place to put the BAF reactor was in front of the coagulation/sedimentation process.