• 한국세라믹학회지
• /
• 제35권1호
• /
• pp.48-54
• /
• 1998

Part I에 이어서 질화규소로 코팅된 질화규소-질화붕소 시스템에 있어서 접촉하중에 의한 코팅층의 파괴에 대한 코팅층의 두께의 영향을 고찰하였다. 코팅층과 기판층간의 elastic/plastic mismatch가 큰 경우 코팅층의 균열생성을 방지하는 어느 임계 두께가 존재한다는 사실을 발견하였으며, mismatch가 감소할수록 이러한 요구 임계두께가 감소하였다. 또한 가해진 하중이 증가할수록 요구 임계두께는 증가하여야 함을 알 수 있었다. 따라서 코팅층의 파괴를 방지하기 위해서는 코팅층과 기판층간의 mismatch와 사용환경(가해지는 하중)을 고려한 적정 임계두께늬 설계가 요구된다.

• Journal of Electrochemical Science and Technology
• /
• 제4권1호
• /
• pp.27-33
• /
• 2013

The consequences of electrode density and thickness for electrochemical performance of lithium-ion cells are investigated using 2032-type coin half cells. While the cathode composition is maintained by 90:5:5 (wt.%) with $LiCoO_2$ active material, Super-P electric conductor and polyvinylidene fluoride polymeric binder, its density and thickness are independently controlled to 20, 35, 50 um and 1.5, 2.0, 2.5, 3.0, 3.5 g $cm^{-3}$, respectively, which are based on commercial lithium-ion battery cathode system. As the cathode thickness is increased in all densities, the rate capability and cycle life of lithium-ion cells become significantly worse. On the other hand, even though the cathode density shows similar behavior, its effect is not as high as the thickness in our experimental range. This trend is also investigated by cross-sectional morphology, porosity and electric conductivity of cathodes with different densities and thicknesses. This work suggests that the electrode density and thickness should be chosen properly and mentioned in detail in any kinds of research works.

• PNF and Movement
• /
• 제18권3호
• /
• pp.425-433
• /
• 2020

Purpose: The purpose of this study was to investigate the effect of 7Hz vibration on the thickness of the rectus femoris, medial femur, rectus femoris tendon, and Achilles tendon. Methods: The statistical methods before and after working around the average value of each of the legs included repeated measures ANOVA. The subjects were 26 males residing in the N area, and we measured the change in muscle thickness and tendon thickness before, four weeks, and eight weeks after the experiment in two groups of 13 subjects each. The analysis method was a two-way repeated measurement variance analysis (ANOVA) with a significance level of 0.05 Results: The rectus femoris, medial broad muscle, rectus femur, and Achilles tendon showed significant increases in the interaction between the periods as well as between the periods and groups (p < 0.05). Conclusion: As a result of this study, the 7Hz vibration had a positive effect on the thickness of the rectus femoris and the vastus medialis muscle as well as the thickness of the rectus femoris tendon and Achilles tendon. It is expected to be used as basic data for vibrational exercises in the future studies and is expected to be used as an exercise to strengthen the leg muscles and tendons.

• Physical Therapy Rehabilitation Science
• /
• 제10권4호
• /
• pp.444-449
• /
• 2021

Objective: The purpose of this study is to observe the change in the thickness of abdominal muscles when electrical muscle stimulation (EMS) is applied to the abdomen during rest and abdominal muscle exercise to investigate the effect of EMS applied to the abdomen on the superficial and deep muscles thickness. Design: Cross sectional design. Methods: Twenty healthy subjects participated in this study. Subjects were performed resting position, resting position with EMS, curl-up and curl-up with EMS. The electrode of the EMS belt is attached to the abdominal wall between the 12th rib and iliac crest. The thickness of abdominal muscles including rectus abdominis (RA), external oblique (EO), internal oblique (IO), and transverse abdominis (TrA) were captured in each position by ultrasound image during expiration. All subjects were performed four positions randomly. Data were analyzed using repeated ANOVA with the level of significance set at 𝛼=0.05. Results: The muscle thickness of RA, EO, IO and TrA were significantly different at each position (p<0.05). The thickness of all abdominal muscles increased significantly when curl-up than curl-up with EMS. Both RA and EO thickness were significantly increased at resting position than resting position and EMS were combined(p<0.05). But IO and TrA thickness were decreased at resting position when EMS were combined. Conclusions: The results suggest that EMS activates superficial abdominal muscles RA and EO. Therefore, abdominal strengthening exercise combined EMS can activate abdominal muscles and can be applied to various patients and rehabilitation in clinical practice.

• Computers and Concrete
• /
• 제31권1호
• /
• pp.71-84
• /
• 2023

In this paper, the effects of the thickness of cubic samples on the tensile strength of concrete blocks were studied using experimental tests in the laboratory and numerical simulation by the particle flow code in three dimensions (PFC3D). Firstly, the physical concrete blocks with dimensions of 150 mm×190 mm (width×height) were prepared. Then, three specimens for each of seven different samples with various thicknesses were built in the laboratory. Simultaneously with the experimental tests, their numerical simulations were performed with PFC3D models. The widths, heights, and thicknesses of the numerical models were the same as those of the experimental samples. These samples were tested with a new tensile testing apparatus. The loading rate was kept at 1 kg/sec during the testing operation. Based on these analyses, it is concluded that when the thickness was less than 5 cm, the tensile strength decreased by increasing the sample thickness. On the other hand, the tensile strength was nearly constant when the sample thickness was raised to more than 5 cm (which can be regarded as a threshold limit for the specimens' thickness). The numerical outputs were similar to the experimental results, demonstrating the validity of the present analyses.

• Steel and Composite Structures
• /
• 제34권5호
• /
• pp.657-670
• /
• 2020

In this paper, vibration analysis of functionally graded nanoshell is studied based on the sinusoidal higher-order shear and normal deformation theory to account thickness stretching effect. To account size-dependency, Eringen nonlocal elasticity theory is used. For more accurate modeling the problem and corresponding numerical results, sinusoidal higher-order shear and normal deformation theory including out of plane normal strain is employed in this paper. The radial displacement is decomposed into three terms to show variation along the thickness direction. Governing differential equations of motion are derived using Hamilton's principle. It is assumed that the cylindrical shell is made of an arbitrary composition of metal and ceramic in which the local material properties are measured based on power law distribution. To justify trueness and necessity of this work, a comprehensive comparison with some lower order and lower dimension works and also some 3D works is presented. After presentation of comparative study, full numerical results are presented in terms of significant parameters of the problem such as small scale parameter, length to radius ratio, thickness to radius ratio, and number of modes.

• Archives of Plastic Surgery
• /
• 제32권3호
• /
• pp.357-362
• /
• 2005

The aim of this study is to elucidate the effect of keratinase on epidermis of rat skin. Twenty-five male Sprague-Dolly rats were used. The hair on the back were removed and $2{\times}2cm$ area was marked. The rats were divided five groups; 1) Control group(Co), 2) Cleansing gel group(Cl), 3) Cleansing gel+keratinase group, 4) Exfoliant gel group(Ex), and 5) Exfoliant gel+ keratinase group(Ex+K). The solutions were applied to the back area twice a day for five days. On fifth day, the skins were harvested, fixed and prepared for histologic sections. The thickness of keratin layer, living epidermis, dermis, and cell layer number of living epidermis were measured. In the group containing keratinase(Cl+K, Ex+K), the thickness of keratin layer and living layer were thinner than other groups. However, there were no significant differences of the cell layer number of living epidermis and thickness of the dermis among the five groups. We think the keratinase may have the effect thinning the keratin layer as well as the thickness of living epidermis, without effecting the living cell and dermal component. The keratinase containing soap may be of benefit to remove the excess keratin layers in human.

• 대한기계학회논문집A
• /
• 제27권9호
• /
• pp.1531-1538
• /
• 2003

This paper compiles solutions of plastic $\eta$ factors and crack tip stress triaxialites for standard and nonstandard fracture toughness testing specimens, via detailed three-dimensional (3-D) finite element (FE) analyses. Fracture toughness testing specimens include a middle cracked tension (M(T)) specimen, SE(B), single-edge cracked bar in tension (SE(T)) and C(T) specimen. The ligament-to-thickness ratio of the specimen is systematically varied. It is found that the use of the CMOD overall provides more robust experimental J estimation than that of the LLD, for all cases considered in the present work. Moreover, the J estimation based on the load-CMOD record is shown to be insensitive to the specimen thickness, and thus can be used for testing specimen with any thickness. The effects of in-plane and out-of-plane constraint on the crack tip stress triaxiality are also quantified, so that when experimental J value is estimated according to the procedure recommended in this paper, the corresponding crack tip stress triaxiality can be estimated. Moreover, it is found that the out-of-plane constraint effect is related to the in-plane constraint effect.

• The Journal of Korean Physical Therapy
• /
• 제34권2호
• /
• pp.68-72
• /
• 2022

Purpose: This study examined the effect of vibration exercise on the thickness of the oblique extrinsic, oblique abdominal, and biceps muscles, which are trunk muscles, targeting children with spastic cerebral palsy. Methods: The participants in this study were 20 children (8 male and 12 female) with cerebral palsy aged 5-10 years. They were classified into two groups using a randomized allocation method, and the trunk muscle thickness was measured using an ultrasound-imaging device before and six weeks after the experiment. A paired t-test was used for the within-group changes, and an independent t-test was used for the inter-group changes. The significance level was set to α=0.05. Results: There was a significant increase in the inter-group change in the experimental group and control group in the intra-group change in the external oblique muscle and internal oblique muscle. After six weeks, there was a significant increase in the experimental group compared to the control group. Conclusion: Vibration exercise had a positive effect on the trunk muscle thickness of children with cerebral palsy. Vibration exercise produced a significant difference in the changes in the trunk muscle thickness in children with cerebral palsy compared to no vibration exercise. These results may provide basic data for future research and as a training method for strengthening the trunk muscles in clinical trials.

• Asian-Australasian Journal of Animal Sciences
• /
• 제25권2호
• /
• pp.183-188
• /
• 2012

To investigate the influence of the prolactin receptor 3 (PRLR3) gene and the retinol-binding protein 4 (RBP4) gene on the production traits of swine, genotyping was performed on 156 and 141 Berkshire pigs, respectively, that were carefully selected for economic traits. The frequencies of allele A in the PRLR3 locus and allele B in the RBP4 locus were 0.50 and 0.42, respectively. Neither locus was in the Hardy-Weinberg equilibrium. After a genotype was assigned to the individuals whose parents had the homozygous genotype, a statistical analysis was conducted for 291 pigs. The animals with the PRLR3 and RBP4 genotypes included 182 and 227 head, respectively. Even though the genotypic effects of PRLR3 (p<0.05) and RBP4 (p<0.01) had a significant influence on the pigs' back fat thickness, the interaction of both genes was not highly significant in terms of the back fat thickness (p = 0.1235). While the estimated epistasis effects of aaBB and aaBb decreased the back fat thickness and reduced the growth rate, the effects of AAbb and aabb increased the growth rate. Despite the insignificant difference in the PRLR genotypes in terms of the days to 90 kg and the average daily gain, the back fat thickness showed a significant difference (p<0.05), and the additive effect of allele A and the dominant effect of the hetero-genotype were -0.377 and 1.206 mm, respectively. The RBP4 genotypes had a very significant effect (p<0.01) on the back fat thickness, the days to 90 kg, and the average daily gain. The additive effects of allele B of the RBP4 locus on the back fat thickness, the days to 90 kg, and the average daily gain were 0.70 mm, -1.3 days and 6.2 g, respectively. Moreover, the dominant effects of the heterozygote for those traits were 0.63 mm, 9.9 days and -45.0 g, respectively. Allele A of the PRLR3 locus favorably influenced the back fat thickness, the days to 90 kg of the body weight, and the average daily gain and its dominant effect unfavorably influenced those traits. Allele B of RBP4 showed an incremental growth rate and back fat thickness, which could lower the lean meat percentage in the carcass. The RBP4 hetero-genotype negatively affected the pork production. These results strongly imply that the selection of allele A of PRLR3 and allele B of RBP4 would produce highly productive pigs in the Berkshire breed. Careful selection of allele B of RBP4 is required because of the increase in the back fat thickness.