• 한국주조공학회지
• /
• 제41권5호
• /
• pp.445-453
• /
• 2021

다양한 합금계에 대한 계산열역학은 CALPHAD 기법으로 잘 알려져있다. 실험적으로 측정된 열역학 특성들을 활용하여 각 상에 대한 Gibbs 에너지 모델 파라미터들을 구하여, 주로 실험적으로 측정되지 못한 영역에 대한 예측이나 실험 결과에 대한 열역학 해석에 활용되고 있다. 본 연구에서는 내열 주조 합금 (IN-657)이 장시간 사용 후에 일정 영역에서 파괴되는 현상의 열역학적 해석을 위해 Ni-Cr-Nb-C 사원계 시스템의 열역학 모델링을 수행하였고, Cr 함량에 따른 시스템의 안정상, 온도에 따른 상분율 및 Ni₂Cr상의 long range ordering 파라미터를 계산하였고 실험결과와 비교하였다. 계산된 열역학 물성들은 실험으로 보고된 파괴온도 영역 및 해당 영역에서 생성된 안정상에 대한 결과를 잘 설명한다. CALPHAD 기법을 통한 열역학 모델링은 다양한 주조 합금의 열역학적 거동을 해석하고 예측하는데 유용하게 사용될 수 있을 것으로 기대된다.

• 융복합기술연구소 논문집
• /
• 제2권2호
• /
• pp.30-34
• /
• 2012

The SI thermochemical cycle process accomplishes water splitting through distinctive three chemical reactions. We focused on thermodynamic models applicable to the process. Recently, remarkable models based on the assumed ionic species have been developed to describe highly nonideal behavior on the liquid phase reactions. ElecNRTL models with ionic reactions were proposed in order to provide reliable process simulation results for phase equilibrium calculations in Section II and III. In this study, the current thermodynamic models of SI thermochemical cycle process were briefly described and the calculation results of the applied ElecNRTL models for phase equilibrium calculations were illustrated for binary systems.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집B
• /
• pp.112-117
• /
• 2000

A numerical study on natural convection in a vertical square cavity filled with a porous medium is carried out with Brinkman-Forchheimer-extended Darcy flow model, and the validity of local thermodynamic equilibrium assumption is studied. The local thermodynamic equilibrium refers to the state in which a single temperature can be used to describe a heat transfer process in a multiphase system. With this assumption, the analysis is greatly simplified because only one equation is needed to describe the heat transfer process. But prior to using this assumption, it is necessary to know in what conditions the assumption can be used. The numerical results of this study reveal that large temperature difference between fluid phase and solid phase exists near wall region, paticularily when the convection becomes dominant over conduction. And the influence of flow parameters such as fluid Rayleigh number, fluid Prandtl number, dimensionless particle diameter and conductivity ratio are investigated.

• 한국산학기술학회논문지
• /
• 제11권2호
• /
• pp.590-596
• /
• 2010

본 연구에서는 디젤대체 연료와 LPG 혼합용 및 도시 가스의 발열량을 높이기 위한 첨가제로 사용할 수 있는 DME 분리공정에 대한 올바른 열역학 모델식의 선정에 대한 해석을 시도하였다. 물과 메탄올 용매 사이의 액상에서의 비이상성을 해석하기 위해서 NRTL 액체 활동도계수 모델식을 사용하였으며, 기상에서 이상기체의 비이상성을 해석하기 위해서 Peng-Robinson 상태방정식을 사용하였다. 한편, Methanol absorber에서 메탄올 수용액 중의 $H_2$, CO, $CO_2$, $H_2$, $CH_4$과 $N_2$ 등과 같은 비응축성 기체의 용해도를 추산하기 위해서 온도와 압력의 함수로 나타낸 Henry parameter를 사용하였다. 사례 연구를 통해서 원료에 대한 용매의 몰 유량비가 3.40일 때 최적이 됨을 알 수 있었다.

• 한국자동차공학회논문집
• /
• 제9권6호
• /
• pp.94-102
• /
• 2001

The thermodynamic second law analysis, which means available energy or exergy analysis, for the indicated performance of Otto cycle engine has been carried out. Each operating process of the engine is simplified and modeled into the thermodynamic cycle. The calculation of the lost work and exergy through each process has been done with the thermodynamic relations and experimental data. The experimental data were measured from the test of single cylinder Otto cycle engine which operated at 2500 rpm, WOT(Wide Open Throttle) and MBT(Minimum advanced spark timing for Best Torque) condition with different fuels: gasoline, methanol and mixture of butane-methanol called M90. Experimental data such as cylinder pressure, air and fuel flow rate, exhaust gas temperature, inlet gas temperature and etc. were used for the analysis. The proposed model and procedure of the analysis are verified through the comparison of the work done in the study with experimental results. The calculated results show that the greatest lost work is generated during combustion process. And the lost work during expansion, exhaust, compression and induction process follows in order.

• 한국세라믹학회지
• /
• 제24권6호
• /
• pp.593-601
• /
• 1987

A thermodynamic model to predict the stability of the water-in-oil type emulsion and the size of the droplets in stable emulsions was developed. Using this model, the effects of various factors government the droplet size in the metal salt solution-kerosene-span 80 system for the preparation of Al2O3-ZrO2 composite powders were investigated. It was shown that the given emulsion systems were thermodynamically unstable in every case but could be kinetically meta stable. When radius ofthe droplet was below nm, the increase in entropy change due to the configurational contribution of small droplets dominated the total free energy change for emulsification. The optimum conditions under which smaller deoplet was obtained were proposed and the validity of the model was proved with diameters of the droplet and composite powders experimentally determined.

• Journal of Ship and Ocean Technology
• /
• 제8권2호
• /
• pp.20-28
• /
• 2004

A dynamic-thermodynamic sea ice model with 50-km spatial and 24-hour temporal resolution is used to investigate the spatial and long-term temporal variability of the sea ice cover the Arctic Basin. The model satisfactorily reproduces the averaged main characteristics of the sea ice and the sea ice extent in the Arctic Basin and its decrease in early 1990th. At times model allows to suppose partial recovery of sea ice cover in the last years of twenty century. The employment of explicit form for description of ridging gives opportunity to assume that the observed thinning is the result of reduction the intensity of ridging processes and to estimate long-term variability of probability the ridge free navigation in the different parts of the Arctic Ocean including the North Sea Route area.

• 설비공학논문집
• /
• 제12권7호
• /
• pp.649-658
• /
• 2000

Thermodynamic modeling of low-pressure scroll compressor was developed by combining continuity and energy conservation equation. Suction gas heating was considered using energy balance inside the low pressure shell. Pressure, temperature and mass of refrigerant-22 as a function of orbiting angle were calculated by solving the governing equations using fourth order Rung-Kutta scheme. Motor efficiency was taken by experiments with a variation of frequency. The developed model was applied to the analysis of an inverter driven scroll compressor with a variation of frequency, pressure ratio and operating conditions. The model was verified with the experimental results at the same operating conditions. The developed model was adequate to predict performance of the inverter driven scroll compressor as a function of operating conditions. Calculated parameters from the model were discharge temperature, mass flow rate, power input, COP, and thermodynamic properties with respect to orbiting angle. To enhance the performance of a scroll compressor, it is essential to diminish leakage at low frequency level and improve the mechanical efficiency at high frequency level.

• Environmental Engineering Research
• /
• 제9권6호
• /
• pp.288-298
• /
• 2004

• Bulletin of the Korean Chemical Society
• /
• 제5권4호
• /
• pp.145-149
• /
• 1984

The entropy and heat capacity are calculated for the Morse oscillator model in order to test the quality of the partition function recently deduced by two of us. It is found that these analytical expressions are more reliable than the usually accepted one and give better results in the calculation of thermodynamic properties.