• 제어로봇시스템학회논문지
• /
• 제14권6호
• /
• pp.543-547
• /
• 2008

In the paper, we develop the ultrasonic bonding technique for LCD driver chips having small size and high pin-density. In general, the mounting technology for LCD driver ICs is a thermo-compression method utilizing the ACF (An-isotropic Conductive Film). The major drawback of the conventional approach is the long process time. It will be shown that the conventional ACF method based on thermo-compression can be remarkably enhanced by employing the ultrasonic bonding technique in terms of bonding time. The proposed approach is to apply the ultrasonic energy together with the thermo-compression methodology for the ACF bonding process. To this end, we design a bonding head that enables pre-heating, pressure and ultrasonic excitation. Through the bonding experiments mainly with LCD driver ICs, we present the procedures to select the best combination of process parameters with analysis. We investigate the effects of bonding pressure, bonding time, pre-heating temperature before bonding, and the power level of ultrasonic energy. The addition of ultrasonic excitation to the thermo-compression method reduces the pre-heating temperature and the bonding process time while keeping the quality bonding between the LCD pad and the driver IC. The proposed concept will be verified and demonstrated with experimental results.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2008년도 추계학술대회 논문집
• /
• pp.47-48
• /
• 2008

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2008년도 춘계학술대회 논문집
• /
• pp.933-934
• /
• 2008

• 한국정밀공학회지
• /
• 제27권7호
• /
• pp.7-12
• /
• 2010

In this paper, chip-on-glass(COG) interconnection with anisotropic conductive film(ACF) using lateral thermosonic bonding technology is considered. In general, thermo-compression bonding which is used in practice for flip-chip bonding suffers from the low productivity due to the long bonding time. It will be shown that the bonding time can be improved by using lateral thermosonic bonding in which lateral ultrasonic vibration together with thermo-compression is utilized. By measuring the internal temperature of ACF, the fast curing of ACF thanks to lateral ultrasonic vibration will be verified. Moreover, to prove the reliability of the lateral thermosonic bonding, observation of pressured mark by conductive particles, shear test, and water absorption test will be conducted.

• 마이크로전자및패키징학회지
• /
• 제22권1호
• /
• pp.35-41
• /
• 2015

In this study, in order to improve the reliability of ACF interconnections, solder ACF joints were investigated interms of solder joint morphology and solder wetting areas, and evaluated the electrical properties of Flex-on-Board (FOB) interconncections. Solder ACF joints with the ultrasonic bonding method showed excellent solder wetting by broken solder oxide layers on solder surfaces compared with solder joints with remaining solder oxide layer bonded by the conventional thermo-compression (TC) bonding method. When higher target temperature was used, Sn58Bi solder joints showed concave shape due to lower degree of cure of resin at solder MP by higher heating rate. ACFs with epoxy resins and SAC305 solders showed lower degree of resin cure at solder MP due to the slow curing rate resulting in concave shaped solder joints. In terms of solder wetting area, solder ACFs with $25-32{\mu}m$ diameters and 30-40 wt% showed highest wetted solder areas. Solder ACF joints with the concave shape and the highest wetting area showed lower contact resistances and higher reliability in PCT results than conventional ACF joints. These results indicate that solder morphologies and wetting areas of solder ACF joints can be controlled by adjustment of bonding conditions and material properties of solder and polymer resin to improve reliability of ACF joints.

• 한국산학기술학회논문지
• /
• 제18권4호
• /
• pp.175-182
• /
• 2017

본 와이어 본딩은 발광 다이오드의 패키징 공정에서 매우 중요한 공정으로 금 와이어를 이용하여 발광 다이오드 칩과 리드 프레임을 연결함으로써 다음 공정에서의 전기적 작동을 가능하게 한다. 와이어 본딩 공정은 얇은 금속선을 연결하는 공정으로 열 압착 본딩(thermo compression bonding)과 초음파 본딩(ultra sonic bonding)이 있다. 일반적인 와이어 본딩 공정은 LED 칩 상부 전극 부위에 볼 모양의 본딩을 진행하는 1st ball bonding 공정, loop를 형성하여 다른 전원 연결부위로 wire를 늘어뜨리는 looping 공정, 다른 전극 부위 상부에 stitch를 형성하여 bonding 하는 2nd stitch bonding으로 구분된다. 본 논문에서는 발광 다이오드 다이 본딩 공정에 영향을 주는 다양한 공정 변수에 대하여 분석을 수행하였다. 그리고 반응 표면 분석법을 통하여 Zener 다이오드 칩과 PLCC 발광 다이오드 패키지 프레임을 연결하는 공정 최적화 결과를 도출하였다. 실험 계획법은 5인자, 3수준에 대하여 설정하였으며 4가지 반응에 대하여 인자를 분석하였다. 결과적으로 본 연구에서는 모든 목표에 맞는 최적 조건을 도출하였다.