• Journal of the Korean Institute of Gas
• /
• v.22 no.6
• /
• pp.123-128
• /
• 2018

MDF was treated on the surface of MDF with fire retardant lacquer, water-soluble flame retardant coat and water-soluble wood cover on the MDF wood, and the pyrolysis characteristics and the atmospheric noxious gas generation characteristics were investigated by using the large capacity thermal analyzer. As a result of investigating pyrolysis and combustion gas generation characteristics after treatment of 0.11 / 11.55 g in terms of mass ratio, it was found that combustion starting time was slightly longer than that of pure MDF in the case of treatment with fire retardant lacquer. The combustion temperature was increased from $340^{\circ}C$ to $450^{\circ}C$. The pyrolysis and combustion gas generation characteristics of the MDF wood treated with the aqueous flame retardant coat showed the changes in combustion starting time and temperature from $260^{\circ}C$ to $542^{\circ}C$ for about 26 minutes at the mass ratio of 0.13 / 11g. Also, when the commercially available waterproof wood cover was treated with 0.13 / 11.55 g of MDF, the sudden weight change tended to increase from $300^{\circ}C$ to $370^{\circ}C$ and showed a second change at approximately $500^{\circ}C$.

• Journal of Dental Anesthesia and Pain Medicine
• /
• v.22 no.4
• /
• pp.305-314
• /
• 2022

Introduction: This clinical trial aimed to evaluate the anesthetic effect of the addition of 2 mg (4 mg/ml) of dexamethasone to 2% lidocaine (plain or with 1:80,000 epinephrine). The solutions were injected for a primary inferior alveolar nerve block (IANB) to provide mandibular anesthesia for the endodontic treatment of mandibular molars with symptomatic irreversible pulpitis. Methods: In a double-blinded setup, 124 patients randomly received either of the following injections: 2% lidocaine with 1:80,000 epinephrine, 2% lidocaine with 1:80,000 epinephrine mixed with 2 mg dexamethasone, or plain 2% lidocaine mixed with 2 mg dexamethasone, which were injected as a primary IANB. Ten minutes after injection, patients with profound lip numbness underwent electric and thermal pulp sensibility tests. Patients who responded positively to the tests were categorized as "failed" anesthesia and received supplemental anesthesia. The remaining patients underwent endodontic treatment using a rubber dam. Anesthetic success was defined as "no pain or faint/weak/mild pain" during endodontic access preparation and instrumentation (HP visual analog scale score < 55 mm). The effect of the anesthetic solutions on the maximum change in heart rate was also evaluated. The Pearson chi-square test at 5% and 1% significance was used to analyze anesthetic success rates. Results: The 2% lidocaine with 1:80,000 epinephrine, 2% lidocaine with 1:80,000 epinephrine mixed with 2 mg dexamethasone, and plain 2% lidocaine mixed with 2 mg dexamethasone groups had anesthetic success rates of 34%, 59%, and 29%, respectively. The addition of dexamethasone resulted in significantly better results (P < 0.001, 𝛘² = 9.07, df = 2). Conclusions: The addition of dexamethasone to 2% lidocaine with epinephrine, administered as an IANB, can improve the anesthetic success rates during the endodontic management of symptomatic mandibular molars with irreversible pulpitis.

• Applied Chemistry for Engineering
• /
• v.34 no.4
• /
• pp.357-364
• /
• 2023

Selective catalytic reduction (SCR) is the most effective method for reducing nitrogen oxide emissions, but the operating temperature range of V₂O₅-WO₃/TiO₂ catalysts is narrow (300~400℃). In this study, a new catalyst with an operating temperature range of 200~450℃ was developed. The catalyst poison, ammonium bisulfate, generated during the SCR process can be removed by heating above 350℃. To increase the number of active sites and promote the dispersion of active materials, titanium isopropoxide (TTIP) treatment was performed on the TiO₂ support with various TTIP/TiO₂ mass ratios. Among them, the 5 wt% TTIP loaded catalyst showed improved performance due to higher thermal stability caused by high W dispersion and the formation of V⁵⁺. In addition, the 5 wt% TTIP-loaded catalyst prepared by a one-step co-precipitation method showed greater V-OH and W-OH dispersion and enhanced interactions in contrast to conventional methods, resulting in higher catalytic activity at lower temperatures. This review article aims to provide an accessible explanation for researchers investigating how to improve the surface properties of TiO2 catalysts using TTIP.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.29 no.1
• /
• pp.1-7
• /
• 2023

Chlorine dioxide (ClO₂) is widely used for post-harvest sterilization treatment. However, there are limitations in the retail application of ClO₂ due to difficulties in handling, expensive facilities, and safety concerns. Therefore, it is necessary to develop a ClO₂ technology that can be easily applied and continuously released for a long period. In this study, a series of ClO₂ self-releasing sachets were developed. First, poly(ether-block-amide) (PEBAX) and polyethylene-glycol (PEG) composite films containing different ratios of citric acid (CA) were prepared using the solution casting method. The as-prepared PEBAX/PEG-CA composite films were evaluated using FT-IR, DSC, and TGA to confirm chemical structure and thermal properties. Subsequently, PEBAX/PEG-CA composite films were designed in the form of a sachet and NaClO₂ powder was transferred into the sachet to achieve a ClO₂ self-releasing system. The ClO₂-releasing behavior of the sachet was investigated by measuring the release amount of the gas using UV-vis. The release amount of ClO₂ increased with increasing CA contents owing to the existence of higher protons (trigger) in the polymer matrix. Further, ClO₂ gas was released for a longer time. Therefore, the as-prepared smart sachet can be tuned according to applications and packaging sizes to serve an optimal sterilization effect.

• Korean Journal of Radiology
• /
• v.21 no.6
• /
• pp.764-772
• /
• 2020

Objective: Laser ablation is a therapeutic modality used to reduce the volume of large benign thyroid nodules. Unsatisfactory reduction and regrowth are observed in some treated nodules. The aim of the study was to evaluate the long-term outcomes of laser treatment for solid nodules during a 5-year follow-up period, the regrowth rate, and the predictive risk factors of nodule regrowth. Materials and Methods: We retrospectively evaluated patients with benign, solid, cold thyroid nodules who underwent laser ablation and were followed-up for 5 years. According to the selection criteria, 104 patients were included (median baseline nodule volume, 12.5 mL [25.0-75.0%, 8-18 mL]; median energy delivered, 481.5 J/mL [25.0-75.0%, 370-620 J/mL]). Nodule volume, thyroid function test results, and ultrasound were evaluated at baseline and then annually after the procedure. Results: Of 104 patients, 31 patients (29.8%) had a 12-month volume reduction ratio (VRR) < 50.0% and 39 (37.5%) experienced nodule regrowth. Of these 39 patients, 17 (43.6%) underwent surgery and 14 (35.9%) underwent a second laser treatment. The rate of nodule regrowth was inversely related to the 12-month VRR, i.e., the lower the 12-month VRR, the higher the risk of regrowth (p < 0.001). The mean time for nodule regrowth was 33.5 ± 16.6 months. The 12-month VRR was directly related to time to regrowth, i.e., the lower the 12-month VRR, the shorter the time to regrowth (p < 0.001; R² = 0.3516). Non-spongiform composition increased the risk of regrowth with an odds ratio of 4.3 (95% confidence interval [CI] 1.8-10.2; p < 0.001); 12-month VRR < 50.0% increased the risk of regrowth with an odds ratio of 11.7 (95% CI 4.2-32.2; p < 0.001). Conclusion: The VRR of thyroid nodules subjected to similar amounts of laser energy varies widely and depends on the nodule composition; non-spongiform nodules are reduced to a lesser extent and regrow more frequently than spongiform nodules. A 12-month VRR < 50.0% is a predictive risk factor for regrowth and correlates with the time to regrowth.

• Journal of Korean Society of Forest Science
• /
• v.41 no.1
• /
• pp.1-6
• /
• 1979

1. The study was conducted on the optimum condition of the treated substrate with dilute sulphuric acid solution and cellulase for saccharification. The wood (saw dust) of Alnus hirsuta Rupr. (10~15 years) was treated with 0.3%, 0.6%, 0.9%, 1.2%, 1.5%, $H_2SO_4$ solution at $1.5kg/cm^2$ for 15min., 30min., 45min., and 60min., followed by thermal treatment at $190^{\circ}C$ for 30min., and screening with 60 mesh sieve, after which to 0.5 grams of each sample was added 0.5ml cellulase solution, and 50ml 0.1M acetic acid buffer solution (pH 5.0), after incubating at $40^{\circ}C$ for 96hr. 2. The crude cellulase of Trichoderma viride Perx. ex. Fr. SANK 16374 was produced by the submerged culture process and produced in the culture fluid was salted out quantitatively by the use of ammonium sulfite. 3. Reducing sugar was determined by the 3.5-dinitrosalicylic acid (DNS) method. 4. The reducing sugar was increased with increase of the sulphuric acid concentration and saw dust was treated with 1.5% $H_2SO_4$ solution at $1.5kg/cm^2$ for 45min. showed the best saccharification (16.0%). The reducing sugar formation did not show statistically significant in 5% levels by thermal treatment time 45min. and 60min. 5. The substrate for cellulase which was treated with 0.9% $H_2SO_4$ solution at $1.5kg/cm^2$ for 60min. showed the best reducing sugar formation (23.6%). And did not show significant difference in 5% levels at 0.9%, 1.2%, and 1.5% $H_2SO_4$ solution.

• Journal of Korean Society of Environmental Engineers
• /
• v.38 no.1
• /
• pp.14-24
• /
• 2016

Information on the lists of pollutants from industrial wastewater discharge are essential not only to specify the key pollutants to be managed in permission process but to design the treatment facilities by the dischargers. In this study, wastewater quality analysis was conducted for three industrial categories including the specified hazardous water pollutants. The general description of the wastewater occurrence, major sources, treatment facilities are also investigated to obtain integrated database on the pollutant inventories for the industrial categories. In addition Based on the analysis of raw wastewater and final effluent, the detected pollutant items are confirmed by analyzing their presence in the raw or supplement materials, the potential of formation as byproducts, and the possibility of inclusion as impurities. The three industrial categories include petrochemical basic compounds, basic organic compounds, and thermal power generation. The water pollutants emitted from petrochemical basic compound manufacturing facilities are 31 items including 16 specified hazardous water pollutants. Basic organic compound manufacturing facilities discharge 30 kinds of pollutants including 14 specified hazardous water pollutants. Thermal power generation facilities emit 20 pollutants, 8 specified hazardous water pollutants among them. These substances were decided as emission inventories of water pollutants finally through the probability evaluation. The compounds detected for each categories are screened through investigation on the possible causes of their occurrence and confirmed as the final water pollutant inventories.

• Journal of Dairy Science and Biotechnology
• /
• v.32 no.2
• /
• pp.93-100
• /
• 2014

In general, whey obtained from various cheese batches is being reused, so as to improve the texture and to increase the yield and the nutrient value of the various final milk-based products. In fact, re-usage of whey proteins, including whey cream, is a common and routine procedure. Unfortunately, most bacteriophages can survive heat treatments such as pasteurization. Hence, there is a high risk of an increase in the bacteriophage population during the cheese-making process. Whey samples contaminated with bacteriophages can cause serious problems in the cheese industry. In particular, the process of whey separation frequently leads to aerosol-borne bacteriophages and thus to a contaminated environment in the dairy production plant. In addition, whey proteins and whey cream reused in a cheese matrix can be infected by bacteriophages with thermal resistance. Therefore, to completely abolish the various risks of fermentation failure during re-usage of whey, a whey treatment that effectively decreases the bacteriophage population is urgently needed and indispensable. Hence, the purpose of this review is to introduce various newly developed methods and state-of-the-art technologies for removing bacteriophages from contaminated whey and whey products.

• Journal of agriculture & life science
• /
• v.43 no.6
• /
• pp.85-93
• /
• 2009

The boiled oyster vacuum-packed in cylindrical can(No. 301-3) were thermally processed at $115^{\circ}C$ to reach Fo values of 5~20 min. The yield was slightly decreased with the increasing of Fo-values (79.2~ 83.7%), and volatile basic nitrogen (VBN) contents increased markedly with the increasing of Fo-value. In fatty acid composition of canned oyster, the composition ratio of saturates and monoenes such as 14:0, 16:0 and 18:1n9 increased, while polyunsaturated fatty acids such as 20:5n-3 and 22:6n-3 decreased with the increasing of Fo-value. In taste compounds, content of total free amino acid in raw oyster was 1,533.5 mg%, and this total content was slightly increased (1,140.8~1,266.2 mg%) with the increasing of Fo values. But contents of betaine and ionic minerals such as Na, K, Mg and P decreased markedly by thermal processing at $115^{\circ}C$. As compared with Fo 5 min. heat treatment; Fo 20 min. heat treatment at $115^{\circ}C$ became more hardened in texture of oyster meat. In sensory evaluations on organoleptic characteristics, no significant difference at 5% level was observed among the canned boiled oyster meats heated at Fo 5~15 min.

• Journal of Korean Orthopaedic Sports Medicine
• /
• v.7 no.1
• /
• pp.27-32
• /
• 2008

Purpose: To evaluate the clinical results of the patients who underwent radiofrequency thermal shrinkage (RFTS) for treatment of anterior cruciate ligament (ACL) laxity after ACL reconstruction. Material and Methods: From October 1999 to March 2006, we performed 133 cases of ACL reconstruction. Among them we experienced 16 patients who had the laxity of reconstructed ACL in second look arthroscopy. Mean follow-up was 20.4 months. Mean age was 33.5 years. 12 cases were male and 4 cases were female. The elongated ACL were treated by bipolar radiofrequency energy with an output of grade II. Subjective and objective parameters were utilized in analyses, such as: the mean range of motion, Lysholm knee score, Tegner activity score, Lachman test, IKDC score. Wilcoxon signed-rank test was used to perform the data analysis. P<0.05 was considered to be statistically significant. Results: Postoperative mean Lysholm knee score (preop: $82.2{\pm}5.2(77{\sim}85))$ (P=0.04), postop: $85.2{\pm}4.8$(82-90)) and anterior displacement by the Telos stress test (preop: $5.4{\pm}4.6(3{\sim}10)mm$, postop: $2.1{\pm}1.9(0{\sim}4)mm)$ (P=0.02), Lachman's test, and IKDC scores (P=0.04) demonstrated significant differences statistically compared to the preoperative. There were no statistical differences in mean range of motion, Tegner activity scale. Conclusions: Arthroscopic shrinkage for the ACL laxity after ACL reconstruction with radiofrequency device showed good clinical results and was applicable operative technique.