• 제목/요약/키워드: thermal recycle

검색결과 66건 처리시간 0.028초

바텀애시 재활용 인공토양 적용 옥상녹화 유니트 시스템의 열특성 (Thermal Property of the Roof Green Unit System Using Artificial Lightweight Soil Recycled with Bottom Ash)

  • 유종수;이종찬;오창원
    • 한국건설순환자원학회논문집
    • /
    • 제8권1호
    • /
    • pp.49-55
    • /
    • 2020
  • 본 연구에서는 바텀애시 재활용 인공토양을 적용한 옥상녹화 유니트 시스템의 표면 온도변화를 계절별로 측정하여 바텀애시 재활용 인공토양의 열특성을 분석한 결과, 바텀애시 인공경량토양이 기존 토양보다 우수한 열차단 특성이 있음을 확인하였다. 또한, 기존 옥상녹화 유니트 시스템과 개발 옥상녹화 유니트 시스템의 열차단 효과를 분석하기 위해 계절별 일교차를 측정한 결과 기존 녹화 유니트 시스템은 현장 포설형 녹화시스템보다 열차단 효과가 낮은 반면 격막을 탈거하여 바텀애시 인공경량토양을 연속된 층으로 형성하는 개발 유니트 녹화 시스템은 기존 현장 포설형 녹화시스템과 유사한 열차단 효과를 갖는 것으로 분석되었다.

Low Temperature Thermal Desorption (LTTD) Treatment of Contaminated Soil

  • Alistair Montgomery;Joo, Wan-Ho;Shin, Won-Sik
    • 한국지하수토양환경학회:학술대회논문집
    • /
    • 한국지하수토양환경학회 2002년도 추계학술발표회
    • /
    • pp.44-52
    • /
    • 2002
  • Low temperature thermal desorption (LTTD) has become one of the cornerstone technologies used for the treatment of contaminated soils and sediments in the United States. LTTD technology was first used in the mid-1980s for soil treatment on sites managed under the Comprehensive Environmental Respones, Compensation and Liability Act (CERCLA) or Superfund. Implementation was facilitated by CERCLA regulations that require only that spplicable regulations shall be met thus avoiding the need for protracted and expensive permit applications for thermal treatment equipment. The initial equipment designs used typically came from technology transfer sources. Asphalt manufacturing plants were converted to direct-fired LTTD systems, and conventional calciners were adapted for use as indirect-fired LTTD systems. Other innovative designs included hot sand recycle technology (initially developed for synfuels production from tar sand and oil shale), recycle sweep gas, travelling belts and batch-charged vacuum chambers, among others. These systems were used to treat soil contaminated with total petroleum hydrocarbons (TPH), polycyclic aromatic hydrocarbons (PAHs), pesticides, polychlorinated biphenyls (PCBs) and dioxin with varying degrees of success. Ultimately, performance and cost considerations established the suite of systems that are used for LTTD soil treatment applications today. This paper briefly reviews the develpoment of LTTD systems and summarizes the design, performance and cost characteristics of the equipment in use today. Designs reviewed include continuous feed direct-fired and indirect-fired equipment, batch feed systems and in-situ equipment. Performance is compared in terms of before-and-after contaminant levels in the soil and permissible emissions levels in the stack gas vented to the atmosphere. The review of air emissions standards includes a review of regulations in the U.S. and the European Union (EU). Key cost centers for the mobilization and operation of LTTD equipment are identified and compared for the different types of LTTD systems in use today. A work chart is provided for the selection of the optmum LTTD system for site-specific applications. LTTD technology continues to be a cornerstone technology for soil treatment in the U.S. and elsewhere. Examples of leading-edge LTTD technologies developed in the U.S. that are now being delivered locally in global projects are described.

  • PDF

마이크로웨이브 열분해(熱分解)를 이용(利用)한 폐(廢) 폴리스티렌과 모터 오일 혼합물(混合物)로부터 고분자(高分子) 원료(原料) 물질(物質) 회수(回收)에 관한 연구(硏究) (Study on Recovery of Polymeric Raw Materials from WastePolystyrene in Motor Oil using Microwave Thermal Decomposition)

  • 강태원
    • 자원리싸이클링
    • /
    • 제15권5호
    • /
    • pp.11-16
    • /
    • 2006
  • 폐 폴리스티렌과 모터 오일의 혼합물로부터 마이크로웨이브 열분해를 이용하여 유용한 고분자 원료물질의 회수를 위한 연구를 수행하였다. 마이크로웨이브 반응기로 quartz tube를 사용하였으며 마이크로웨이브 흡수체로 실리콘 카바이드를 사용하였다. 공정 변수로 마이크로웨이브 입력 파워를 180에서 250 W까지 변화시켰으며, 마이크로웨이브 조사시간을 30분에서 1시간까지 변화시키며 실험하였다. 열분해를 통하여 얻어진 생성물을 GC/MS를 사용하여 분석한 결과 스티렌, 메틸 스티렌, 톨루엔, 그리고 에틸벤젠이 4개의 주요 회수 성분이었으며, 이 중 폴리스티렌으로부터 스티렌의 회수율은 약 50% 이었다. 열분해에 마이크로웨이브를 사용함으로써 일반 열분해 보다 훨씬 낮은 온도에서 열분해가 이루어졌다.

평면 음극선관의 재생률 향상을 위한 유리재료의 열적 특성에 관한 연구 (A Study on the Thermal Properties of Glass for Effective Salvage Process of Flat Cathode-ray Tube)

  • 박상후;이부윤;김원진;허보석
    • 대한기계학회논문집A
    • /
    • 제25권12호
    • /
    • pp.1988-1994
    • /
    • 2001
  • The CRT(Cathode-ray Tube) of salvage is a process of separating the panel and funnel to recycle a cathode-ray tube. In this paper, the thermal properties of glass for CRT were studied to improve its recycling ratio. In the salvage process, several patterns of breakage, as called 'comer pull', were easily generated on the sealing surface of panel or funnel glass due to the residual tensile stress, which had correlations with some parameters of the manufacturing process of CRT and the initial material properties of glass. Finite element analyses and experimental approaches on the flit sealing process were carried out to obtain the major characteristic of glass related to the residual stress. From this study, it was identified that the thermal expansion coefficient of glass had much influence on the residual stress of panel glass after frit sealing process. Therefore, the optimal conditions of thermal properties for CRT glass were proposed to achieve an effective salvage process. By using these optimal conditions, the size of comer pull on the panel and funnel glass was reduced to 10% level compared with the original size, and the recycling ratio of CRT was increased in the salvage process.

폐비닐 골재의 기본특성에 관한 연구 (An Experimental Study on the Waste Polyethylene Aggregate for Construction Materials)

  • 김영진
    • 한국지반환경공학회 논문집
    • /
    • 제4권4호
    • /
    • pp.5-16
    • /
    • 2003
  • 농촌 비닐하우스 등에서 발생하는 폐비닐을 재활용하기 위한 방법의 하나로 폐비닐을 이용하여 골재를 만들었다. 이 골재에 대하여 용출시험, 비중시험, 다짐시험, LA마모시험, 대형전단시험, 투수시험 등 물리적, 역학적 시험을 실시하였다. 또한 폐비닐골재에 대한 열전도시험, 부동수분시험, 동상시험을 실시하였으며, 현장에서 폐비닐골재와 자갈을 도로 동상방지층에 포설한 후 두 해 겨울철에 걸쳐 각각의 온도분포를 측정하여 그 결과를 비교하였다.

  • PDF

건축용 벽 바름재로서 패각분말의 활용성 연구 (Utilizability of Shell Powder as Wall Coatings for Thin Textured Finishes)

  • 전지현;국찬
    • KIEAE Journal
    • /
    • 제7권1호
    • /
    • pp.33-40
    • /
    • 2007
  • 0.4 Million tons of shell powder have been disused as waste in KOREA and caused severe environmental pollution though shell powder can be utilized in real life for many ways. It is impending problem to recycle shell powder as it requires high expense for burying and temporary outside heap and causes severe environmental pollution being a main factor of ocean waste. To suggest the basic data for development of eco-friendly and high-function Wall Coatings Thin Textured Finishes, a wall coating sample was applied to indoor walls of a mock-up and temperature and humidity were measured to assess the thermal performance of it, and a survey of preference for the color sense and feel of the materials with a movie of specimens. The results of the study are following; 1) High insulation performance is shown from the assessment result of the room polystyrene board adhered on the walls then high humidity controlling performance is shown from that of the room polystyrene board coated by shell powder. This point out that shell powder has superiority for humidity controlling. 2) The result of thermal and humidity assessment shows that shell powder makes up for thermal conduction of the polystyrene board and same result can be expected from the assessment with materials which has similar thermal characteristics with polystyrene.3) Ranking of preferred specimens is; 1st Case 13, 2nd Case 17, 3rd Case 16, and 4th Case 12. Preferred shell powder was the ark shell. Preferred powder for plaster was the powder mixed with that sifted by 0.8mm, 100mesh and 40mesh, and for spray was the fine powder mixed with that sifted by 100mesh and 40mesh.

Resource Cyclical Dynamics Focused on the Waste of Electric and Electronic Equipment

  • 이만형;김태용;김동찬;홍성호
    • 한국시스템다이내믹스연구
    • /
    • 제9권2호
    • /
    • pp.129-154
    • /
    • 2008
  • As a practical means to upgrade urban sustainability, this paper focuses on resource cyclical systems concerned with the waste of electric and electronic equipment (WEEE) in Korea. Borrowing System Dynamics concepts and approaches, it examines behavioral changes of WEEE dynamics to observe whether the existing management methods can be readjusted. The measurement is based upon both reuse and material and thermal recycle simulation works in the individual stage of WEEE discharge, collection, and treatment, going beyond the traditional recycle-only customs. This research estimates that the newly introduced Extended Producer Responsibility (EPR) system would definitely exert a significant impact on the final stage of WEEE treatment, decreasing the final treatment volume in the first half of the research period. The trend, nonetheless, would be reversed in the second half, mainly owing to the additional waste volume originated from the local government and recycling center. Sensitivity analysis poses, among others, that the local government-supported reuse center should take charge of a pivotal role in the long run. The research also shows that sufficientand necessary conditions for the WEEE management and treatment should be given to the combined efforts, both from the private sectors and the public domains. Based on these research findings, the paper recommends that key stakeholders including the producer and the public organizations should devise how to jointly carry out specific agenda centered around partnership or network buildings.

  • PDF

Performance Evaluation of Inter-Locking Block Using Fly Ash

  • Shin, Byung-Chuel
    • 한국환경과학회지
    • /
    • 제13권2호
    • /
    • pp.143-148
    • /
    • 2004
  • In this paper, the properties of inter - locking block using fly ash are discussed in order to provide economical advantages and improve quality, and protect environment and recycle resources. Fly ash is the by-product of coal in thermal power plant. The experimental parameters are fly ash content, the amount of AE water - reducing agent and mixing proportion of cement mortar. According to the experimental results, the improvement of quality in the side of strength, absorption ratio and freeze - thaw resistance for manufacturing inter -locking block and the curtailment of cost can be achieved in case of 15% of fly ash and 0.3% of AE water- reducing agent are mixed into mortar mixture of 1 :6(C:S).

목재의 연소특성(1) (질량감소와 착화지연) (Combustion Characteristics of Wood Materials (1) (Mass Reduction and Ignition Delay))

  • 김춘중
    • 한국연소학회지
    • /
    • 제4권2호
    • /
    • pp.11-22
    • /
    • 1999
  • Combustion characteristics of the wood chips(balsa chips) were experimentally investigated with respect to the thermal recycle system of the urban waste. The urban waste contains plastics, vegetable and wood materials. Wood was chosen as an example of the one of the component of urban dust. A small wood chip was burned in a electric furnace by the micro-electric balance. The mass reduction rate was normalized by the initial mass of test piece and the time of volatile combustion end. When the mass of the wood chips(balsa chips) was larger than 0.5g, the combustion similarity was found on the normalized mass reduction rate.

  • PDF

Assessment of Autoxidative Resistance for Organic Solvent by Pressure Monitoring Test

  • Kito, Hayato;Fujiwara, Shintaro;Kumasaki, Mieko;Miyake, Atsumi
    • International Journal of Safety
    • /
    • 제9권1호
    • /
    • pp.43-46
    • /
    • 2010
  • In the recycle process of organic solvent, the atmospheric oxygen can cause autoxidation and product peroxide. The time-saving method to evaluate the hazards has been required. In this study, oxygen pressure monitoring experiment was proposed as a new method to evaluate autoxidative resistances of solvents. Some of organic solvents were pressurized by oxygen and kept under isothermal condition. At the same time, the pressure in the vessel tracked. Iodometrical titration, thermal analysis and spectroscopic analysis were performed to measure peroxide concentration, the heat of reaction and chemical bonding change. From the results that THF has larger oxygen consumption rate than CPME, it is considered that autoxidative resistance of THF is lower than that of CPME. This method enables to obtain results in shorter time than other methods. These experimental results were consistent with the previous research with longer test durations [1-2].