• Nuclear Engineering and Technology
• /
• v.56 no.2
• /
• pp.728-744
• /
• 2024

The presence of hydrogen absorbed by zirconium-based cladding materials during reactor operation can trigger degradation mechanisms and endanger the rod integrity. Ensuring the durability of the rods in extended time-frames like dry storage requires anticipating hydrogen behavior using numerical modeling. In this context, the present paper describes a hydrogen post-processing tool for Falcon - HYPE, a PSI's in-house tool able to calculate hydrogen uptake, transport, thermochemistry, reorientation of hydrides and hydrogen-related failure criteria. The tool extracts all necessary data from a Falcon output file; therefore, it can be considered loosely coupled to Falcon. HYPE has been successfully validated against experimental data and applied to reactor operation and interim storage scenarios to present its capabilities.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2008.04a
• /
• pp.31-33
• /
• 2008

The study related that Red Phosphorus is surface coated by Al(OH)$_3$ using the proportion 1:1, 1:3, 1:5 respectively, and then take the coated red phosphorus as the core material, at the same time, use Melamine-Formaldehyde resin as the capsule materials for microcapsule processing. According to the TG analysis, the coated red phosphorus with the proportion 1:3 has the tiptop temperature of thermal decomposition, it reaches 376.20^{\circ}C$$. The same to the ratio of burning incomplete carbon it reaches 26.5%. The lowest moisture absorption ratio of the red phosphorus that used coated red phosphorus for microcapsule processing can reach 0.5% with the condition that thermal decomposition temperature decline 3.6%.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.1508-1511
• /
• 1997

In this paper, design parameters of Rapid Thermal Processing(RrW) to minimize the wafer tempera ture uniformity errors are proposed. 1,anip ling positions and the wafer height are important parameters for waf er temperature uniformity in R'I'P. We propose the method to seek lamp ling positions and the wafer height for optimal temperature uniformity. l'he ~~roposed method is applied to seek optimal lamp ling positions and the waf er height of 8 inch wafer. 'I'o seek the optimal lamp ling positions and the wafer height, we var\ulcorner. lamp ling 110s itions and the wafer height and then formulate the wafer temperature uniformity problem to the linear programmi ng problem. Finally, it is shown that the wafer temperature uniformity in RI'I' designed by optimal prarneters is improved to comparing with Ii'l'P designed by the other method.

• Laser Solutions
• /
• v.12 no.3
• /
• pp.7-13
• /
• 2009

The process of thermal-degradation of thin-film polymeris studied in this work for various laser sources from CW to fs. Samples composed of a thin polymer layer sandwiched between two glass plates are irradiated by the lasers and the threshold irradiance of polymer carbonization is experimentally measured. In the numerical analysis, the transient temperature distribution is calculated and the number density of carbonization in the polymer layer is also estimated. It is shown that pulsed lasers can result in more uniform distribution of temperature and carbonization than the CW laser.

• Journal of the Korean Society of Combustion
• /
• v.16 no.3
• /
• pp.21-26
• /
• 2011

Thermal analyses are conducted to measure chemical kinetic parameters of an unknown liquid fuel with various components. Thermal Analyses are divided into two different methods such as TGA(Thermo-Gravimetric Analysis) and DSC(Differential Scanning Calorimety). Non-isothermal experimental results are analyzed by adopting TGA and they are filtered by Freeman-Carroll method. As a results of the analysis, chemical parameters of the activation temperature and the reaction order are measured to be 6128.2 K and 1.4, respectively. Furthermore, the chemical kinetic parameters are obtained by a variety of mathematical processing methods. It has been found that they show a little difference depending on the processing method.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.3 no.4
• /
• pp.257-262
• /
• 2002

A design method of a power controller for controlling the temperature adopted in RTP (rapid thermal processing) which uses the phase control method is presented. The power controller is fabricated by using the design method presented in this paper and is tested. As the results, the range of average voltage from the variable output is 0∼198.06 V and the control resolution is 48.356 mV (12 bit) at the range of the input signal (0∼10 V).

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.355-358
• /
• 2008

We report a method for improving characteristics of AC PDP in this study. This improvement is obtained by spreading MgO nanoparticles on transparent dielectric layer. These nanoparticles are covered with MgO protective layer by electron beam evaporation. MgO nanoparticle has difference in cathodoluminescence stronger than MgO layer by electron beam evaporation. This method worked for reducing statistical delay especially. Efficacy, discharge voltage and luminance were also improved But these improvements has limited lifetime because continuous ion bombardments changed characteristic of MgO surface.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.34D no.10
• /
• pp.68-76
• /
• 1997

In this paper, design parameters of rapid thermal processing(RTP) to minimize the wafer temperature uniformity errors are proposed. Lamp ring positions and the wafer height are important parameters for wafer temperature uniformity in RTP. We propose the method to seek lamp ring positions and the wafer gheight for optimal temperature uniformity. The proposed method is applied to seek optimal lamp ring positions and the wafer feight of 8 inch wafer. To seek the optimal lamp ring positions and the wafer height, we vary lamp ring positions and the wafer height and then formulate the wafer temperature uniformity problem to the linear programming problem. Finally, it is shown that the wafer temperature uniformity in RTP designed by optimal problem. Finally, it is hsown that the wafer temperature uniformity is RTP designed by optimal parameters is improved to comparing with RTP designed by the other method.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.1043-1044
• /
• 2008

In this study, a novel algorithm of the improvement residual non-uniformity (RNU) in thermal imaging system is proposed using correlated double sample signal processing. The proposed method attempts to eliminate offset variation of ROIC in IR detector causing the variation of FPA (focal plane array) temperature and suppling power. Experimental results show that the proposed method confirmed a better performance than the existing RNU system.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.5 no.1
• /
• pp.31-36
• /
• 2010

In this paper, an autonomous mobile robot for fire detection is designed. The robot is equipped with thermal sensor which rotates for wide range of detection. The fire detector A2TPMI is used. A data processing method for robust fire detection is also implemented. AD converter and Kalman filter is applied to remove noisy signal from the fire detection sensor.