• 제목/요약/키워드: thermal physical properties

검색결과 1,098건 처리시간 0.028초

가시광선 활용을 위한 Ag 도핑 흑색 ZnO 나노 광촉매 합성 (Synthesis of Ag-doped black ZnO nano-catalysts for the utilization of visible-light)

  • 김의준;김혜민;이승효
    • 한국표면공학회지
    • /
    • 제56권3호
    • /
    • pp.208-218
    • /
    • 2023
  • Photocatalysts are advanced materials which accelerate the photoreaction by providing ordinary reactions with other pathways. The catalysts have various advantages, such as low-cost, low operating temperature and pressure, and long-term use. They are applied to environmental and energy field, including the air and water purification, water splitting for hydrogen production, sterilization and self-cleaning surfaces. However, commercial photocatalysts only absorb ultraviolet light between 100 and 400 nm of wavelength which comprises only 5% in sunlight due to the wide band gap. In addition, rapid recombination of electron-hole pairs reduces the photocatalytic performance. Recently, studies on blackening photocatalysts by laser, thermal, and plasma treatments have been conducted to enhance the absorption of visible light and photocatalytic activity. The disordered structures could yield mid-gap states and vacancies could cause charge carrier trapping. Herein, liquid phase plasma (LPP) is adopted to synthesize Ag-doped black ZnO for the utilization of visible-light. The physical and chemical characteristics of the synthesized photocatalysts are analyzed by SEM/EDS, XRD, XPS and the optical properties of them are investigated using UV/Vis DRS and PL analyses. Lastly, the photocatalytic activity was evaluated using methylene blue as a pollutant.

깊은 준위 결함에 의한 SiC SBD 전기적 특성에 대한 영향 분석 (The effect of deep level defects in SiC on the electrical characteristics of Schottky barrier diode structures)

  • 이건희;변동욱;신명철;구상모
    • 전기전자학회논문지
    • /
    • 제26권1호
    • /
    • pp.50-55
    • /
    • 2022
  • SiC는 차세대 전력반도체의 핵심 재료로 넓은 밴드갭과 높은 절연파괴강도, 열전도율을 가지고 있지만 deep level defect와 같은 다양한 문제를 야기하는 결함이 존재한다. SiC에서 나타나는 defect는 물성에서 나타나는 defect와 계면에서 나타나는 interface trap 2가지로 나뉜다. 본 논문은 상온 (300 K)에서 보고되는 Z1/2 trap concentration 0 ~ 9×1014 cm-3을 SiC substrate와 epi layer에 적용하여 turn-on 특성을 알아보고자 한다. 전류밀도와 SRH(Shockley-Read-Hall), Auger recombination을 통해 구조 내 재 결합률을 확인하였다. trap concentration이 증가할수록 turn-on시 전류밀도와 재 결합률은 감소하며 Ron은 0.004에서 0.022 mΩ으로 약 550% 증가하였다.

수세 유무에 따른 염소 바이패스 분진의 광물 탄산화 연구 (A Study on Mineral Carbonation of Chlorine Bypass Dust with and without Water Washing)

  • 유혜진;염우성
    • 자원리싸이클링
    • /
    • 제32권6호
    • /
    • pp.18-24
    • /
    • 2023
  • 본 연구에서는 염소 바이패스 분진을 광물 탄산화하여 시멘트의 원료 및 콘크리트 혼화재로 적용하기 위한 초기 연구를 수행하였다. 염소 바이패스 분진의 물리적·화학적 특성을 확인하기 위해 수세 처리 유무 및 수세 횟수에 따른 XRD, XRF, 입도분포 분석을 수행하였으며 그에 따른 특성 변화를 확인하였다. 분진의 종류, 교반 온도, 시간 경과에 따른 염소 바이패스 분진의 광물 탄산화 결과 수세 미처리 샘플은 최대 24%이었으며 수세 처리 샘플은 27%이었으나 실험 조건에 따라 광물 탄산화의 속도 및 정도는 상이하였다. 수세 처리된 분진이 수세 미처리 분진에 비해 더 많은 광물 탄산화가 일어난 이유는 칼슘 함량이 더 높았기 때문이라고 판단되었다. 또한, 더 높은 교반 온도는 초기 광물 탄산화를 더 촉진시키지만 분진의 종류 및 시간 경과에 따라 상이한 결과가 도출되었다.

Design and simulation of 500 MHz single cell superconducting RF cavity for SILF

  • Yanbing Sun;Wei Ma;Nan Yuan;Yulin Ge;Zhen Yang;Liping Zou;Liang Lu
    • Nuclear Engineering and Technology
    • /
    • 제56권1호
    • /
    • pp.195-206
    • /
    • 2024
  • Shenzhen Innovation Light source Facility (SILF) is a 3.0 GeV fourth generation diffraction limited synchrotron light source currently under construction in Shenzhen. The SILF storage ring is proposed to use two 500 MHz single cell superconducting radio frequency (SRF) cavities to provide 2.4 MV RF voltage. In this study, we examined the geometric structure of mature CESR superconducting cavities and adopted a beam-pipe-type extraction scheme for high-order modes (HOM). One of the objectives of SRF cavity design and optimization in this study is to reduce Ep/Eacc and Bp/Eacc as much as possible to reduce power loss and ensure stable operation of the cavity. To reduce the risk of beam instability and thermal breakdown, the HOM and Multipacting (MP) are simulated. Moreover, the mechanical properties of the cavity are analyzed, including frequency sensitivity from pressure of liquid helium (LHe), stress, tuning, Lorentz force detuning (LFD), the microphone effect, and buckling. By comprehensive design and optimization of 500 MHz single-cell SRF cavities, a superconducting cavity for SILF storage ring was developed. This paper will detailed present the design and simulation.

Surface characteristics of thermally treated titanium surfaces

  • Lee, Yang-Jin;Cui, De-Zhe;Jeon, Ha-Ra;Chung, Hyun-Ju;Park, Yeong-Joon;Kim, Ok-Su;Kim, Young-Joon
    • Journal of Periodontal and Implant Science
    • /
    • 제42권3호
    • /
    • pp.81-87
    • /
    • 2012
  • Purpose: The characteristics of oxidized titanium (Ti) surfaces varied according to treatment conditions such as duration time and temperature. Thermal oxidation can change Ti surface characteristics, which affect many cellular responses such as cell adhesion, proliferation, and differentiation. Thus, this study was conducted to evaluate the surface characteristics and cell response of thermally treated Ti surfaces. Methods: The samples were divided into 4 groups. Control: machined smooth titanium (Ti-S) was untreated. Group I: Ti-S was treated in a furnace at $300^{\circ}C$ for 30 minutes. Group II: Ti-S was treated at $500^{\circ}C$ for 30 minutes. Group III: Ti-S was treated at $750^{\circ}C$ for 30 minutes. A scanning electron microscope, atomic force microscope, and X-ray diffraction were used to assess surface characteristics and chemical composition. The water contact angle and surface energy were measured to assess physical properties. Results: The titanium dioxide ($TiO_2$) thickness increased as the treatment temperature increased. Additional peaks belonging to rutile $TiO_2$ were only found in group III. The contact angle in group III was significantly lower than any of the other groups. The surface energy significantly increased as the treatment temperature increased, especially in group III. In the 3-(4,5-Dimethylthiazol- 2-yl)-2,5-diphenyltetrazolium bromide assay, after 24 hours of incubation, the assessment of cell viability showed that the optical density of the control had a higher tendency than any other group, but there was no significant difference. However, the alkaline phosphatase activity increased as the temperature increased, especially in group III. Conclusions: Consequently, the surface characteristics and biocompatibility increased as the temperature increased. This indicates that surface modification by thermal treatment could be another useful method for medical and dental implants.

열처리에 따른 석면의 광물학적 특성변화 (Changes of Mineralogical Characteristics of Asbestos by Heat Treatment)

  • 정현이;문원진;윤성준;김유미;노열
    • 자원환경지질
    • /
    • 제47권5호
    • /
    • pp.507-515
    • /
    • 2014
  • 석면이 발암물질로 지정 되면서 물리화학적 처리를 통하여 석면광물을 비섬유형으로 변형시키거나 또는 상전이시킴으로 광물 종을 변화시켜 무해화하는 연구가 진행되고 있다. 하지만 국내에서는 석면의 광물학적 특성과 함께 무해화가 가능함을 제시하는 연구만 진행되었을 뿐, 열처리에 따른 석면광물의 형태 및 결정구조 변화에 대한 연구는 미비한 실정이다. 따라서 본 연구에서는 국내에서 산출되는 백석면(chrysotile)과 석면형 투각섬석(asbestiform tremolite)에 대하여 열처리 전 후 석면의 형태 변화와 상전이에 따른 광물학적 특성을 전자현미경법으로 연구하였다. 백석면은 $850^{\circ}C$에서 2시간 동안 열처리된 후 감람석으로 상전이 되었으며, 석면형 투각섬석은 $1050^{\circ}C$에서 2시간 동안 열처리된 후 투휘석으로 상전이 되었다. 이러한 광물 상전이를 전자현미경법으로 연구한 결과, 두 석면은 섬유상 및 침상의 형태를 보이는 섬유다발이 열처리에 의해 끝이 매끄러운 주상의 형태로 변형되었으며, 분쇄하여도 벽개면, 섬유다발 등과 같은 형태로 발달하지 않음을 확인하였다. 또한 열처리에 따른 광물의 주 구성성분 변화 없이 결정구조의 변화가 일어남을 확인하였다. 이는 함수 규산염광물인 석면이 열에 의해 수산기(OH)가 제거되면서 광물의 상전이와 결정구조의 변화가 나타난 것으로 사료된다. 이처럼 전자현미경법은 석면의 형태, 화학성분, 그리고 결정구조의 변화를 동시에 확인 할 수 있어 광물 상전이에 따른 석면의 무해화를 연구하는데 효과적인 방법으로 판단된다.

Fibroblasts 세포주의 HSP70에 대한 DBD-bio-plasma의 effects: Cell에서 Heat Shock에 의한 Molecular Level 변화로의 새로운 접근법 (Effects of DBD-bio-plasma on the HSP70 of Fibroblasts: A New Approach on Change of Molecular Level by Heat Shock in the Cell)

  • 김경연;이준영;남민경;최은하;임향숙
    • KSBB Journal
    • /
    • 제30권1호
    • /
    • pp.21-26
    • /
    • 2015
  • Plasma is an ionized gas mixture, consisting of neutral particles, positive ions, negative electrons, electronically excited atoms and molecules, radicals, UV photons, and various reactive species. Also, plasma has unique physical properties distinct from gases, liquids, and solids. Until now, non-thermal plasmas have been widely utilized in bio-medical applications (called bio-plasma) and have been developed for the plasma-related devices that are used in the medical field. Although numerous bio-plasma studies have been performed in biomedicine, there is no confirmation of the nonthermal effect induced by bio-plasma. Standardization of the biological application of plasma has not been evaluated at the molecular level in living cells. In this context, we investigated the biological effect of bio-plasma on living cells. Hence, we treated the fibroblasts with Dielectric Bauvier Discharge bio-plasma (DBD), and assessed the characteristic change at the molecular level, one of the typical cellular responses. Heat shock protein 70 (HSP70) regulates its own protein level in response to stimuli. HSP70 responds to heat shock by increasing its own expression at the molecular level in cells. Hence, we confirmed the level of HSP70 after treatment of mouse embryonic fibroblasts (MEFs) with DBD. Interestingly, DBD-plasma induced cell death, but there was no difference in the level of HSP70, which is induced by heat shock stimuli, in DBD-treated MEFs. Our data provide the basic information on the interaction between MEFs and DBD, and can help to design a molecular approach in this field.

SiC SBD 적용한 고효율 Bridgeless PFC 컨버터에 대한 연구 (A Study on high efficiency Bridgeless PFC Converter applied SiC SBD)

  • 전준혁;김형식;김희준;안준선
    • 한국정보전자통신기술학회논문지
    • /
    • 제12권4호
    • /
    • pp.449-455
    • /
    • 2019
  • 본 논문은 Bridgeless PFC Converter의 환류 다이오드를 SiC SBD(Schottky Barrier Diode)로 제안하여 고효율화를 달성하였다. 또한 Bridgeless PFC Converter의 동작원리에 대한 설명을 통해 Bridgeless PFC Converter에서 환류 다이오드의 도통 구간을 나타내어 환류 다이오드의 손실에 따른 시스템 손실의 기여도를 검증하였고, SiC SBD 소자의 물성 및 역 회복 특성에 따른 장점을 설명하였으며 턴 온 손실과 턴 오프 손실을 측정하여 효율을 비교 분석하고, 소자 단품 특성을 확인하기 위한 다이오드의 역회복 파형 분석을 통하여 소자의 역회복 손실을 계산하였다. 소자 특성을 고려한 시뮬레이션 결과 값을 도출해내어 실제 시스템의 파형 분석 및 비교를 통해 그 결과 값을 검증하였다. 소자 특성을 고려하기 위하여 PSIM의 Thermal Module을 사용하여 시뮬레이션을 진행하였으며, 그 결과로 턴온 손실 0.6W, 턴 오프 손실 20.6W로 전체 스위칭 손실은 22.2W로 나타났다. 시작품 실험을 통하여 분석한 결과 턴온 손실 0.608W, 턴 오프 손실 21.62W로 전체 스위칭 손실 22.228W의 결과 값을 도출하였고, 두 결과 값의 비교로 실험 방법의 타당성을 입증하였다. 또한 최대 효율 94.58%의 고효율을 달성하였다.

칼슘 술폰산염 컴플렉스 그리스 합성과 특성 연구 (Studies on the synthesis and characteristics of calcium sulfonate complex grease)

  • 우재구;이동규;하기룡
    • 한국산학기술학회논문지
    • /
    • 제20권7호
    • /
    • pp.8-15
    • /
    • 2019
  • 본 연구에서는 칼슘 술폰산염 컴플렉스 그리스와 리튬 컴플렉스 그리스를 합성하고, 그리스의 일반 물성, 유변학적 특성 및 윤활성능을 비교하였다. 내열성 시험인 적점 시험에서 칼슘 술폰산염 컴플렉스 그리스의 열 안정성은 섭씨 300도 이상, 리튬 컴플렉스 그리스는 섭씨 245도로 측정되었다. 점도시험에서 칼슘 술폰산염 컴플렉스 그리스는 7.0 파스칼 초, 리튬 컴플렉스 그리스는 4.5 파스칼 초로 측정되었다. 따라서 칼슘 술폰산염 컴플렉스 그리스가 리튬 컴플렉스 그리스보다 내열성 및 점착성면에서 우수함을 확인하였다. 4-ball 내마모시험에서 칼슘 술폰산염 컴플럭스 그리스는 0.43 밀리미터, 리튬 컴플럭스 그리스는 0.85 밀리미터로 측정되었고, 4-ball 내하중성 시험에서 칼슘 술폰산염 컴플렉스 그리스는 620 킬로그램중, 리튬 컴플렉스 그리스는 125 킬로그램중 으로 측정되었다. 따라서, 칼슘 술폰산염 컴플렉스 그리스가 리튬 컴플렉스 그리스보다 내마모성 및 내하중성에서 우수하였다. 위 시험결과로 고온 및 고하중의 윤활에서는 칼슘 술폰산염 컴플렉스 그리스가 리튬 컴플렉스 그리스보다 더 효과적인 것을 알 수 있었다.

상지(桑紙)의 보존성(保存性)에 관한 연구 (The Study about the Preservation of the Paper of Mulberry)

  • 정선영
    • 한국기록관리학회지
    • /
    • 제4권2호
    • /
    • pp.1-22
    • /
    • 2004
  • 상지(桑紙)는 우리나라에서 많이 사용된 종이였음에도 불구하고 문헌에 그의 원료에 대한 기록이 거의 없다. 양잠의 원료로서의 중요성 때문이기도 하지만 닥나무와 비슷한 형태때문일 것으로 생각된다. 특히 양잠에 유리한 수종(樹種)으로 개량되면서 종이의 원료로서의 중요성을 점차 잃어서 현재는 생산되지 않는 전통종이 가운데 하나다. 본고에서는 뽕나무의 인피를 사용하여 전통상지(傳統桑紙)를 만들고 저지(楮紙)와 함께 그 물성(物性)을 비교하여 보았다. 그 결과 섬유의 형태면에서는 섬유의 길이와 넓이의 비율이 475이며, 화학적 조성에서도 리그닌의 함량이 닥나무보다 적었으므로 종이의 원료로서 매우 우수하였다. 종이의 물성도 저지와 큰 차이가 없었다. 또 종이의 보존성을 시험한 결과 $105^{\circ}C$로 72시간, 144시간을 가열한 환경에서는 상지가 저지와 비교하여 불리하였으나, 자외선이 24시간, 100시간, 200시간 조사된 환경에서는 시간이 경과될수록 변화의 폭이 적었다. 즉 오랜기간이 경과될수록 상지는 덜 노화되며, 외관상으로도 열화가 많이 진행되지 않는 훌륭한 종이임이 밝혀졌다. 특히 실험에 사용한 상피(桑皮)가 개량종임을 감안한다면, 조선조나 그 이전에 만들어진 상지는 더 품질이 좋았을 것으로 사료된다.