• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문집
• /
• pp.665-670
• /
• 2002

Pleasantness or quietness becomes one of the most important factors for residential designs recently. Especially for apartments, the noise generated by falling objects becomes a sensitive issue these days. To overcome the problem of the impact noise in apartments, the floor design has been changed. To reduce the transmissibility of the noise, composite floor structures are devised and implemented for the construction of apartments. In this paper, the noise reduction performance of a composite floor plate with holes is analyzed. Computational modelings for the structures are developed and its performance is evaluated by using the finite element method. The results show that the noise can be well reduced with the multi-layer composite floor plates with holes.

• 한국인터넷방송통신학회논문지
• /
• 제12권3호
• /
• pp.71-74
• /
• 2012

물체에서 방사되는 열잡음 신호를 수신하여 증폭하고 검파회로를 거쳐 DC전압으로 출력하는 35GHz 대역의 근거리 디케형(Dicke type) 복사계를 제작하고, 복사계의 온도 보정과 그 특성을 소개한다. 또한 이를 이용하여 특정 물체의 밀리미터파 방사에너지를 측정하기 위한 온도보정에 관한 연구를 수행 하였다. 온도범위 299K ~ 309K에서 온도 증가에 따른 밀리미터파 복사계의 출력전압은 선형적이었으며, 이 범위의 온도에서 미지의 흑체 복사에너지의 상대적인 양을 밀리미터파 복사계를 이용하여 측정이 가능하다. 실험한 온도 범위에서 온도와 출력전압과의 관계는 V=0.03601K - 10.70517 을 얻었다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.281-285
• /
• 2002

A new method of dynamic contact force measurement between a pantograph and a contact wire is proposed in this paper The method does not require design modification of an original pantograph in order to install sensors such as load cells. Contact forces can be expressed as the sum of vertical shear forces at the support points and inertial forces. Using specially-designed strain gage rosettes. vertical shear forces at the supported points can be measured without noise mixing and thermal effects. In order to obtain contact forces from shear forces, 3 inertial force compansation methods are proposed and compared in this paper. By validation process, the new proposed measurement method is verified to be applicable to the on-line current collection test.

• 한국소음진동공학회논문집
• /
• 제23권9호
• /
• pp.797-805
• /
• 2013

In this paper vibration and stability analysis of laminated composite shells based on the first order shear deformation theory(FSDT) for two different boundary conditions(clamped-clamped, simply supported) are performed. Structural model of cross-ply symmetric laminated composite cylindrical shells subjected to a combination of magnetic and thermal fields is developed via Hamilton's variational principle. These coupled equations of motion are based on the electromagnetic equations(Faraday, Ampere, Ohm, and Lorenz equations)and thermal equations which are involved in constitutive equations. Extended Galerkin method is adopted to obtain the discretized equations of motion. Variations of dynamic characteristics of composite shells with applied magnetic field, temperature gradient, laminate thickness-ratio and radius ratio for two boundary conditions are investigated and pertinent conclusions are derived.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1995년도 추계학술발표회논문집(2)
• /
• pp.973-979
• /
• 1995

The input equivalent noise charge (ENC) of hydrogenated amorphous silicon radiation detector diodes was measured and analyzed. The noise sources of amorphous silicon diodes were analyzed into three sources; shot noise, flicker noise and thermal noise from the contact resistance. By comparing the measured ENC with the calculated signal charge in uniform generation case, the signal-to-noise ratio (S/N) for the sample diodes is estimated as a function of the detector bias and the shaping time of Gaussian pulse shaper. The maximum S/N occurred at the bias level just above the full depletion voltage for shaping time of 2∼3 ${\mu}$sec. The developed method is useful in optimum design or amorphous silicon p-i-n diodes for charged particulate radiation spectroscopy.

• 폴리머
• /
• 제33권1호
• /
• pp.91-95
• /
• 2009

폴리(아미드-이미드)와 연자성체의 블렌딩에 의해 고온에서 이용 가능한 내열성 전자기 노이즈 흡수용 필름을 제조하였다. N,N-디메틸아세트아미드에 폴리(아미드 아믹 산)을 용해시킨 후 연자성체 파우더를 혼합하고 이용액을 유리 기판에 캐스팅한 뒤 열을 가하여 이미드화하는 방법으로 전자기 노이즈 흡수 필름을 제조하였다. 제조된 필름의 열적 특성, 열 안정성 및 기계적 성질을 분석하고 마이크로 스트립 라인 법에 의해 전자기 흡수력을 측정하였는데,1 GHz에서 150 ${\mu}m$두께의 복합체 필름의 전력손실(power loss)은 약 25%였다.

• 동력기계공학회지
• /
• 제16권2호
• /
• pp.54-59
• /
• 2012

In the present study, process optimization for thermal-sprayed Ni-based alloy coating has been performed using Taguchi method and analysis of variance(ANOVA). Ni-based alloy coatings were fabricated by flame spray process on steel substrate, and the hardness test and wear test were performed. Experiments were designed as per Taguchi's L9 orthogonal array and tests were conducted with different Oxygen gas flow, Acetylene gas flow, Powder feed rate and Spray distance. Multi response signal to noise ratio (MRSN) was calculated for the response variables and the optimum combination level of factors was obtained simultaneously using Taguchi's parametric design.

• 전자공학회논문지 IE
• /
• 제43권4호
• /
• pp.65-75
• /
• 2006

본 연구에서는, 열상장비(thermal imaging equipment)로 촬영한 적외선 영상의 화질을 저해하는 주된 요소인 임펄스 잡음(impulse noise)과 가우시안 잡음(Gaussian noise)을 제거하는 웨이브렛 변환 기반 방법을 논의한다. 효과적인 잡음제거를 위하여 잡음으로 손상된 적외선 영상에 대하여 상세 부분대역 웨이브렛 계수에 대한 미분과 중앙절대편차(median absolute deviation)를 이용한 문턱값 설정방법을 제안하였다. 특히, 임펄스성 잡음제거를 위해서 웨이브렛 계수를 미분하여 임펄스 잡음의 위치를 나타내는 이진 마스크를 생성하는 방법을 채택하였다. 이와 같은 방법에 의해, 모서리와 잡음을 구분하는 적응 문턱 값 설정을 보다 효율적으로 얻을 수 있었고, 기존 웨이브렛 수축법과 비교를 통하여 제안한 잡음제거 방법의 타당성을 확인하였다.

• 한국소음진동공학회논문집
• /
• 제16권4호
• /
• pp.428-436
• /
• 2006

The assessment of an urban site depends on the way whether it responds to multiple needs such as functionality, aesthetic and complex comfort of acoustic, thermal, lighting and air quality etc. This study aims to investigate the assessment of various urban soundscapes in the sense of acoustic amenity by the questionnaires. As a result, acoustic amenity assessment was influenced by the non-acoustic factors such as environment assessment of visual, thermal, air quality etc. In the sense of sound quality, urban environmental sound was interpreted as 3 factors of strength, evolution of time, spacial localization. So these factors would be considered in the new assessment method for acoustic amenity. And it was shown that the subjects tend to perceive the noise level less than $3{\sim}5dB\;L_{eqA}$ according to the urban landscapes under the similar noise exposure level.

• 대한의용생체공학회:의공학회지
• /
• 제25권5호
• /
• pp.369-376
• /
• 2004

이명 재훈련 치료법은 백색 잡음을 이용하여 이명 환자를 치료하는 효과적인 방법이다. 이 치료법은 광대역의 청각 세포를 자극하기 위하여 백색 잡음을 이용한다. 본 논문에서는 열 잡음을 이용한 소형의 백색 잡음 발생기와 인간의 외이와 중이 시스템에 의해 변형된 주파수 응답을 보상할 수 있는 주파수 응답 조절부를 제안하였다. 실험 결과, 제안된 시스템이 기존의 백색 잡음 발생기에 비하여 이명 재훈련 치료의 목적에 보다 적합한 형태임을 알 수 있었다.