• 설비공학논문집
• /
• 제24권1호
• /
• pp.51-60
• /
• 2012

Optimization procedures of performance analysis for ORC(Organic Rankine Cycle) system are established to the characteristics of low temperature heat sources such as open-type and closed-type. Effective heat recovery and heat extraction related to maximum power of the cycle as well as heat quality and thermal efficiency must be considered in the case of the open-type low temperature heat source. On the other hand, in the case of the closed-type low temperature heat source, only thermal efficiency is important due to constant heat input. In this study, thermal efficiency and exergy efficiency representing a level of close to Carnot cycle are studied, as useful index for the optimization of the ORC system. To validate the results of cycle analysis, those are compared with appropriate experimental data of ORC system as a thermal efficiency point of view.

• 반도체디스플레이기술학회지
• /
• 제19권3호
• /
• pp.30-35
• /
• 2020

A microlens has been fabricated by various methods such as a thermal reflow, hot embossing, diamond milling, etc. However, these methods require a relatively complex process to control the microlens shape. In this work, we report on a simple and cost-effective method to fabricate a cylindrical microlens (CML), which can diffuse light widely. We have employed a slot-die head with the dual plate (a meniscus guide with a protruded μ-tip and a shim with a slit channel) for coating of a narrow stripe using poly(methyl methacrylate) (PMMA). We have shown that the higher the coating gap, the lower the maximum coating speed, which causes an increase in the stripe width and thickness. The coated PMMA stripe has the concave shape. To make it in the shape of a convex microlens, we have applied the thermal reflow method. When the stripe thickness is small, however, its effect is negligible. To increase the stripe thickness, we have increased the number of repeated coating. With this scheme, we have fabricated the CML with the width of 223 ㎛ and the thickness of 7.3 ㎛. Finally, we have demonstrated experimentally that the CML can diffuse light widely, a feature demanded for light extraction efficiency of organic light-emitting diodes (OLEDs) and suppression of moiré patterns in displays.

• KIEAE Journal
• /
• 제7권6호
• /
• pp.17-22
• /
• 2007

The integration of PV modules into building facades or roof could raise their temperature that results in the reduction of PV system's electrical power generation. Hot air can be extracted from the space between PV modules and building envelope, and used for heating in buildings. The extraction of hot air from the space will enhance the performance of BIPV systems. The solar collector utilizing these two aspects is called PV/T(photovoltaic/thermal) solar collector. This paper compares the experimental performance of two different types of air type PV/T collector units: the base case of a collector unit with 10cm gap for forced ventilation and the other unit with copper pin attached to PV module to enhance its thermal performance. The experimental results shows that the base case unit had the overall efficiency of 41.9% and the improved unit with copper pin attached to PV module had 50.1% efficiency. For these air type PV/T units, the forced ventilation of the air space improved the electrical performance as well as the thermal performance.

• 한국식품과학회지
• /
• 제31권4호
• /
• pp.894-898
• /
• 1999

둥굴레속 중에서도 흔하지 않는 용둥굴레(약초로 다룰 때는 옥죽이라고도 함)를 이용하여 제조되는 옥죽차를 사용하여 향기성분의 연구를 행하였다. 옥죽차의 제조법은 천성산 일대에서 인공재배하여 $4{\sim}5$년 자란 용둥굴레의 뿌리를 9번 찌고 9번 건조하는 방법인 9증 9포(九蒸九曝)법을 적용하는데, 그 제조 과정중의 향기성분을 단계별로 Likens and Nickerson의 연속증류추출법으로 추출하고, GC 및 GC-MS법으로 분석, 동정하였다. 그 결과 원재료에는 향기성분이 거의 없었으나, 찌고 덖는 과정을 거치는 동안 furfural, furfuryl alcohol, 2-acetylfuran, 5-methylfurfural, 5-hydroxymethylfurfural 및 2-methyl-dihydro-2(3Η)-furanone등과 methylpyrazine과 2,3-dimethylpyrazine 등의 pyrazine류, acetic acid 및 propionic acid등의 acid류가 생성되었다.

• 한국전자통신학회논문지
• /
• 제17권1호
• /
• pp.139-146
• /
• 2022

COVID-19 사태 장기화로 인한 실내활동 제약으로 등산객들이 증가함에 따라 산불화재, 실종자 등 산악 사고가 증가하고 있다. 구조요원의 손길이 닿지 않는 곳에 위험 상황이 발생한다면 쿼드콥터를 활용하여 인명 수색 시간을 감소할 수 있다. 이러한 점에 착안하여 본 논문에서는 쿼드콥터의 원활한 호버링을 수행 할 수 있도록 Multiwii를 사용하여 기체의 기울기 변화에 따라 x축(Roll), y축(Pitch), z축(Yaw)의 최적화된 PID 값을 설정하여 원활한 호버링을 할 수 있도록 하였다. 또한, 카메라는 라즈베리파이에 Open CV를 설치한 후 HSV 색공간을 사용하여 인상착의와 같은 색상을 필터링한 영상을 수신하고, 색추출이 어려운 환경에서는 열화상 카메라를 사용하여 열 감지 영상을 실시간으로 수신할 수 있도록 하였으며, 2~8m 높이에서 호버링이 가능하였으며 5m 높이에서 파란색 추출이 가능하였고, 10cm 이내의 거리에서 열 감지가 가능하였다.

• Journal of the Korean Wood Science and Technology
• /
• 제36권6호
• /
• pp.138-146
• /
• 2008

본 연구에서는 잎담배처리공정 및 궐련제조공정에서 분리되어 배출되는 바이오매스 중에서 가장 많은 양을 차지하는 황색종 주맥 바이오매스의 화학성분, 세포벽 물질 조성 및 비등온 조건에서의 열분해 특성에 대해 분석평가 하였다. 주맥 바이오매스에는 전건시료 기준으로 조회분이 19.1%, 전당성분은 20.7%로 다량 함유되어 있었고, 무기원소 중에는 칼륨이 3.8%, 개별당 중에는 fructose 함량이 6.2%로 가장 많은 것으로 분석되었다. 세포벽 성분 중 리그닌 함량은 3%로 낮았지만 펙틴의 함량은 7%로 높았으며, 홀로셀룰로오스는 전체의 13% 정도를 차지하였고, 이중 $\alpha$-셀룰로오스의 함량은 약 60%, 나머지는 $\beta$와 $\gamma$-셀룰로오스로 나타났다. 공기기체 조건과 질소기체 조건에서 황색종 주맥의 열분해 특성은 서로 다르게 나타났는데, 특히 산소가 존재하는 공기기체 조건에서는 $473^{\circ}C$와 $581^{\circ}C$ 온도에서 질소기체 조건에서는 나타나지 않는 열감량 피크들이 DTG 곡선에서 나타났으며, 이 중 $581^{\circ}C$ 온도에서의 피크는 열수추출하여 용해성분을 제거한 주맥의 열분해 시에는 발생하지 않았다. 분리된 용해성 성분을 냉동건조 시킨 후 열감량 분석을 실시한 결과 이 피크가 용해성 성분에서 기인된 것임을 확인할 수 있었다. 주맥 바이오매스의 헤미셀룰로오스와 셀룰로오스 열분해 특성차이는 질소기체 조건에서 더욱 확실하게 구별되어 나타나는 것을 확인할 수 있었다.

• 한국수소및신에너지학회논문집
• /
• 제24권1호
• /
• pp.44-49
• /
• 2013

Hydrogen penetration into a metal leads to damages and mechanical degradations and its content measurement is of importance. For a precise measurement, a sample preparation procedure must be optimized through a series of studies on sample washing and drying. In this study, two-step washing with organic solvents and thermal soaking in inert gas were tried with a rod-shaped, API X65 steel sample. The samples were machined from a steel plate and then washed in acetone and etyl-alcohol for 5 minute each and dried with compressed air. After then, the samples were thermally soaked in a home-made nitrogen gas chamber during 10 minute at different heat gun temperatures from 100 to $400^{\circ}C$ and corresponding temperature range in the soaking chamber was from 77 to $266^{\circ}C$ according to the temperature calibration. Hydrogen residue in the samples was measured with a hot extraction system after each soaking step; hydrogen residue of $0.70{\pm}0.12$ wppm after the thermal soaking at $77^{\circ}C$ decayed with increase of the soaking temperature. By adopting the heat transfer model, decay behavior of the hydrogen residue was fitted into an exponential decay function of the soaking temperature. Saturated value or lower bound of the hydrogen residue was 0.36 wppm and chamber temperature required to lower the hydrogen residue about 95% of the lower bound was $360^{\circ}C$. Furthermore, a thermal desorption spectroscopy was done for the fully soaked samples at $360^{\circ}C$. Weak hydrogen peak was observed for whole temperature range and it means that hydrogen-related contaminants of the sample surface are steadily removed by heating. In addition, a broad peak found around $400^{\circ}C$ means that parts of the hydrogen residue are irreversibly trapped in the steel microstructure.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume I
• /
• pp.301-304
• /
• 2006

For the purpose of investigating the contributions of various gases to climate change, the thermal radiation associated with greenhouse gases are extracted from AIRS (Atmospheric Infrared Sounder) infrared radiances over the tropical pacific region. AIRS instrument which was launched on the EOS-Aqua satellite in May 2002 covers the spectral range from 650 cm-1 to 2700 cm-1 with a spectral resolution of between 0.4 cm-1 and 1 cm-1. In order to extract the thermal radiation absorbed by individual gases, the interfering background radiances at the top of the atmosphere are simulated using the radiative transfer code MODTRAN (MODerate spectral resolution atmospheric TRANsmittance). The simulations incorporated the temperature and water vapor profiles taken from NCEP (National Centers for Environmental Prediction) reanalyses. The differences between the simulated background radiance and AIRS-measured radiance result in the absorption of upward longwave radiation by atmospheric gases (i.e. greenhouse effect). The extracted absorption bands of individual gases will allow us to quantify the radiative forcing of individual greenhouse gases and thus those data will be useful for climate change studies and for the validation of radiative transfer codes used in general circulation models.

• 전기전자학회논문지
• /
• 제22권3호
• /
• pp.578-584
• /
• 2018

이미지 분할은 영상의 해석과 이미지 인식 분야에서 다양한 방법으로 연구되고 있으며, 특정한 목적에 따른 이미지의 특성을 분리하기 위해 사용된다. 본 논문에서는 열화상 이미지의 특징점인 고온을 검출하여 이미지를 분할하는 알고리즘을 제안한다. 또한 연산속도의 향상을 위해 제안하는 알고리즘을 Zynq-7000 Evaluation Board 환경에서 FPGA Hardware Block Design을 진행하였다. 고온 검출 알고리즘은 16ms에서 0.001ms의 속도 향상을 보였으며 전체 블록은 50ms에서 0.322ms로 속도 향상을 보이는 것을 확인하였다. 또한 영상 테스트벤치를 사용하여 소프트웨어와 하드웨어 이미지에 대해 유사한 PSNR 결과를 입증하였다.

• 설비공학논문집
• /
• 제5권3호
• /
• pp.226-233
• /
• 1993

Thermosyphons are simple devices that can passively transport thermal energy over relatively large distance with little temperature degradation. Especially, the thermosyphon system requires no costly energy input and is completely maintenance free. These attributes permit the use of low grade thermal energy for thermal control of structures including the stabilization of highway foundations. This paper presents the experimental results of the snow melting system in which thermosyphon was utilized to ransfer the earth energy to the pavement to remove snow and ice. The test facility, three earth heated and one unheated test panels, is designed to investigate the variables associated with removing snow and ice from pavement surfaces. The results of these test show that the earth heated panel surface temperature is higher $2{\sim}6^{\circ}C$ than unheated panel when the ambient air temperature is $-7^{\circ}C$. The thermal performance of this earth source thermosyphon system for road heating showed that there was no snow on the heated test panels when the snowfall was 5cm average for the region.