• Korean Journal of Medicinal Crop Science
• /
• v.21 no.3
• /
• pp.204-212
• /
• 2013

In general, stepwise hot steaming process is known to be effective in improving its biological activities; however, not much employed in processing Codonopsis lanceolata due to its hardness. The complex processed C. lanceolata showed highest free radical scavenging acitivity as 45.21%. Total phenol and flavonoid content were of complex processed C. lanceolata higher than conventional extract and alone steaming process. It was showed the lower melanogenesis rate on melanin production test by B16F10 cells as 27.46%. High inhibitory of tyrosinase was also measured as 28.61% by adding steamed Codonopsis lanceolata extracts by high pressure extraction of 1.0 $mg/m{\ell}$. And anti-wrinkle activity were 39.08%. In comparing phenolic acids profiles in the extract, in general higher amounts of polyphenol were obtained possibly by easy release of active components during thermal processing, which results in better antioxidant activities than that of general extract. This findings can also be supported by result that the extract by steaming process showed better activities than the general extraction extract.

• Bulletin of the Korean Chemical Society
• /
• v.23 no.4
• /
• pp.575-579
• /
• 2002

Two-dimensionally cross-linked ultrathin films of poly(maleic acid-alt-methyl vinyl ether) (MA-MVE) and poly(allylamine) (PAA) were produced by using sodium dioctadecyl sulfate (2C18S) as the monolayer template for Langmuir-Blodgett (LB) depositio n. The template molecules were subsequently removed by thermal treatment followed by extraction. The polyion-complexed monolayers of three components, i.e., template 2C18S, co-spread PAA, and subphase MA-MVE, were formed at the air-water interface. Their monolayer properties were studied by the surface pressure-area isotherm. The monolayers were transferred on solid substrates as Y type. The polyion-complexed LB films and the resulting network films were characterized by FT-IR spectroscopy, X-ray photoelectron spectroscopy (XPS), and scanning electron microscopy (SEM). The cross-linking to form a polymer network was achieved by amide or imide formation through heat treatment under a vacuum. SEM observation of the film on a porous fluorocarbon membrane filter (pore diameter 0.1 ㎛) showed covering of the pores by four layers in the polyion complex state. Extraction by chloroform followed by heat treatment produced hole defects in the film.

• International Journal of Computer Science & Network Security
• /
• v.23 no.1
• /
• pp.1-10
• /
• 2023

Open surface water body extraction is gaining popularity in recent years due to its versatile applications. Multiple techniques are used for water detection based on applications. Different applications of Radar as LADAR, Ground-penetrating, synthetic aperture, and sounding radars are used to detect water. Shortwave infrared, thermal, optical, and multi-spectral sensors are widely used to detect water bodies. A stereo camera is another way to detect water and different methods are applied to the images of stereo cameras such as deep learning, machine learning, polarization, color variations, and descriptors are used to segment water and no water areas. The Satellite is also used at a high level to get water imagery and the captured imagery is processed using various methods such as features extraction, thresholding, entropy-based, and machine learning to find water on the surface. In this paper, we have summarized all the available methods to detect water areas. The main focus of this survey is on water detection especially in small patches or in small areas. The second aim of this survey is to detect water hazards for unmanned vehicles and off-sure navigation.

• Journal of Oral Medicine and Pain
• /
• v.37 no.4
• /
• pp.243-250
• /
• 2012

Trigeminal nerve injuries due to invasive dental procedures such as implant surgery and extraction is one of the most serious issues in dentistry and may provoke medico-legal problems. Thus, for objective and reliable assessment of nerve injury, a need of QST (quantitative sensory testing) is emphasized and thermal threshold test is an essential part of QST, reported to have acceptable reliability in the orofacial region. This pilot study aimed to evaluate thermal thresholds for limited cases of trigeminal nerve injures. The study investigated 18 clinical cases with trigeminal nerve injuries who visited Department of Oral Medicine, Dankook Univeristy Dental Hospital during the period from May 2011 to Oct 2012. Thermal thresholds was measured by Thermal Sensory Analyzer, TSA-II (Medoc, Israel). Their CDT(cold detection threshold) was significantly decreased in the affected sides compared to the unaffected sides. Other parameters such as WDT(warm detection threshold), CPT(cold pain threshold) and HPT(heat pain threshold) did not show statistical difference between the affected and unaffected sides. Further researches are required to compare thermal thresholds relative to types of nerve deficits such as thermal hyper- or hypoesthesia and hyper- or hypoalgesia for larger sample.

• Journal of the Korean Geotechnical Society
• /
• v.37 no.8
• /
• pp.51-58
• /
• 2021

South Korea, as the 10th country to join the Artemis program led by NASA, is actively supporting various researches related to the lunar exploration. In particular, the utilization of water as a resource in the Moon has been focused since it was discovered that ice exists at the lunar pole as a form of frozen soil. Information on the thermal conductivity of lunar regolith can be used to estimate the existence for ice water extraction by thermal mining. In this study, the vacuum pressure effect on thermal conductivity of KLS-1 was investigated with a DTVC (Dusty Thermal Vacuum Chamber). The reliability of KLS-1 was reconfirmed through comparison with thermal conductivity of known standard lunar regolith simulants such as JSC-1A. An empirical equation to assess thermal conductivity considering dry unit weight and vacuum pressure was proposed. The results from this study can be implemented to simulate lunar cryogenic environment using the DTVC.

• Korean Journal of Food Science and Technology
• /
• v.30 no.1
• /
• pp.90-96
• /
• 1998

An experiment to make mixed juices carrying the freshness and other specific characteristics of vegetables and fruits which are useful for the prevention and treatment of various diseases was attempted on the emphases of pretreatment methods, combination of fruits and vegetables, and elimination of microorganisms. Blanch in boiling water prior to extraction for green vegetables, addition of ascorbic acid during extraction for tomatoes and apples, or addition of ascorbic acid after blanch in 3% acetic acid for carrots was effective to keep colors and suspended solids in liquid extract. On the basis of sensory evaluation the extracts from tomatoes, apples. carrots. mallows, watercreses+pine needles, Angelica keiskei Koiz, jujubes and lemons were selected and mixed at the ratio of 3 : 3 : 3 : 1/2 : 1/2 : 1/2 : 1/2 : 1/5. The mixed extracts were pasteurized for 15sec at $96^{\circ}C$ or filtered through a ultramembrane filter. While the centrifuge precipitation and retentates on the membrane filter were autoclaved and combined with ultrafiltrates. The mixed juices showed $pH\;4.07{\sim}4.10$ titratable acidity $66.35{\sim}84.08$, soluble solid $7{\sim}9^0Brix$, reducing sugar $5.42{\sim}6.97%$, glucose $1.96{\sim}2.30%$, fructose $3.46{\sim}4.14%$ and high content of K, Mg and Ca. Ultrafiltration showed better quality scores in color, juice. Peroxidase and microorganisms were inactivated by thermal treatment and ultrafiltration.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.15 no.1
• /
• pp.143-148
• /
• 2007

The objective of this study was to investigate the proper conditions of calcination and calcium extraction from powdered oyster shell. The physical characteristics such as particle size distribution, surface morphology, and thermal gravity were examined. The following result were obtained. As the powdered oyster shell was ignited in high temperature of $650^{\circ}C$ to $950^{\circ}C$, the calcination reactions was effectively progressed. The amount of weight loss during calcination would be matched with the generation of carbon dioxide gas. In the calcination of powdered oyster shell, the amount of weight loss increased according to the increased of calcination temperature and the decrease of mean particle size. It was founded that the proper temperature and retention time of calcination was $850^{\circ}C$ and 40 minute. In the extraction of calcium into liquid form using acid addition, the calcination oyster shell was more effective than the non-calcinated shell. The liquid calcium extraction technique using the calcinated oyster shell needed more researches considering cost evaluation.

• Journal of the Korean Solar Energy Society
• /
• v.31 no.3
• /
• pp.73-79
• /
• 2011

ORC(organic Rankine cycle) has potential of reducing consumption of fossil fuels and has many favorable characteristics to exploit low-temperature heat sources. This work analyzes performance of ORC with superheating using low-temperature energy sources in the form of sensible energy. Maximum mass flow rate of a working fluid relative to that of a source fluid is considerd to extract maximum power from the sources. Working fluids of R134a, $iC_4H_{10}$ and $C_6C_6$, and source temperatures of $120^{\circ}C$, $200^{\circ}C$ and $300^{\circ}C$ are considered in this work. Results show that for a fixed source temperature thermal efficiency increases with evaporating temperaure, however net work per unit mass of source fluid has a maximum with respect to the evaporating temperature in the range of low source temperature. Results also show that the maximum power extraction is possible with R134a for the source temperature of $120^{\circ}C$, with $iC_4H_{10}$ for $200^{\circ}C$, and with $C_6C_6$ for $300^{\circ}C$.

• Journal of Sensor Science and Technology
• /
• v.27 no.4
• /
• pp.237-241
• /
• 2018

The real-time enrichment and detection of pathogens are serious issues and rapidly evolving field of research because of the ability of these pathogens to cause infectious diseases. In general, bacterial detection is accomplished by conventional colony counting or by polymerase chain reaction (PCR) after DNA extraction. As colony counting requires considerable time to cultivate, PCR is an attractive method for rapid detection. A small number of pathogens can cause diseases. Hence, a pretreatment process, such as enrichment is essential for detecting bacteria in an actual environment. Thus, in this study, we developed a microfluidic chip capable of performing rapid enrichment of bacteria and the extraction of their genes. A lectin, i.e., Concanavalin A (ConA), which shows binding affinity to the surface of most bacteria, was coated on the surface of magnetic particles to nonspecifically capture bacteria. It was subsequently concentrated through magnetic forces in a microfluidic channel. To lyse the captured bacteria, magnetic particles were irradiated by a wavelength of 532nm. The photo-thermal effect on the particles was sufficient for extracting DNA, which was consequently utilized for the identification of bacteria. Our device will help monitor the existence of bacteria in various environmental situations such as water, air, and soil.

• Korean Chemical Engineering Research
• /
• v.43 no.1
• /
• pp.16-20
• /
• 2005

Porous polypropylene membranes were prepared by a thermally induced phase separation method in super-critical $CO_2$, where polypropylene and Camphene were used as raw materials. The porosity of polypropylene membranes with 10 wt% polypropylene concentration was 78, 80, 73% by using methanol, ethanol, and n-buthanol as an analytical solvent, respectively. The tensile strength increased with an increasing polypropylene concentration, where it was $0.17kg_f/mm^2$ at 10 wt% polypropylene concentration. The extraction rate for Camphene increased with time and Camphene was removed 94% in 5 min. It increased with an increasing temperature and was 99% at $45^{\circ}C$, however, decreased with an increasing temperature at higher than $45^{\circ}C$. The extraction rate increased with an increasing pressue up to 150 bar, however, decreased slightly with an increasing pressure over 150 bar. The extraction rate had a relation with the solubility of Camphene in supercritical $CO_2$.