• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 춘계학술대회 논문집
• /
• pp.349-352
• /
• 2009

In this study, the relation between the performance degradation of SOFC single cell and the increase of polarization resistance for the cathode is investigated. $Pr_{0.3}Sr_{0.7}Co_{0.3}Fe_{0.7}O_3$(PSCF3737, $19.4{\times}10^{-6}K^{-1}$) and $Gd_{0.1}Ce_{0.9}O_2$ (CGO91, $12{\times}10^{-6}K^{-1}$) are used as a cathode and an electrolyte, respectively. The polarization resistance of cathode is increased due to the delamination caused by thermal expansion coefficient difference. The voltage drop with 10%/1000h decline rate occurs during long-term, when the interface between the cathode and the electrolyte is delaminated due to TEC difference.

• 청정기술
• /
• 제15권3호
• /
• pp.186-193
• /
• 2009

본 연구에서는 상용운전 중에 있는 반연속식 로터리 킬른형 열분해반응기에 지자체에서 발생되는 필름형 혼합 폐플라스틱을 투입한 후 열분해하여 얻은 저급의 열분해유를 세 형태의 반응온도 프로그램에서 분해반응시키고, 여기에서 얻어지는 생성유의 특성을 논의하였다. 원료인 저급 열분해유의 특성은 원소분석 및 발열량 분석, SIMDIST 분석으로 확인하였고, 각 반응온도 프로그램에 따른 분해반응 결과는 각 성분의 수율분포, 액상 생성물의 누적수율과 생성비 등으로 논의하였다. 연구결과는 한 단계 반응온도 프로그램에 비해 다단계 반응온도 프로그램의 경우가 원하는 생성물인 오일수율이 높았고, 상대적으로 잔류물의 수율은 낮게 나타났다. 연속적인 열분해반응에서 반응온도 프로그램은 생성물의 수율분포 등 생성유 특성에 많은 영향을 주었다.

• 한국식품영양학회지
• /
• 제20권2호
• /
• pp.120-124
• /
• 2007

천연 항산화제로 사용되는 토코페롤은 가열 온도가 높을수록, 가열 시간이 길수록 토코페롤의 분해율이 증가하였으며, 무산소 가열의 경우, 토코페롤은 산소가 있을 때 보다 덜 분해되었다. 알파-, 감마-. 델타- 토코페롤의 무산소 가열 조건을 만들기 위하여 $100{\sim}250^{\circ}C$에서 5${\sim}$60분 가열하는 동안 회화로 속으로 질소를 계속 흘려보내는 실험 방법을 사용하였다. 헥산으로 추출한 토코페롤은 두 종류의 용출 용매와 역상 ${\mu}$-Bondapak C$_{18}$-컬럼을 사용한 HPLC로 분리하였고 토코페롤의 분해 패턴과 잔존량을 조사하였다. 토코페롤의 열분해 키네틱스는 온도와 시간의 함수로 분석되었고 열분해 패턴은 1차 반응으로 나타났다. 무산소 가열시 알파-, 감마-, 델타-토코페롤의 열분해 활성화 에너지는 각각 3.47, 5.85 그리고 6.76 kcal/mole 이었다.

• Elastomers and Composites
• /
• 제23권2호
• /
• pp.125-133
• /
• 1988

The thermal degradation of polymethyl methacrylate(PMMA) blend namely polymethyl methacrylate-polycarbonate(PMMA-PC) blend and polymethyl methacrylate-polystyrene(PMMA-PS) blend were carried out by isothermal method under air at several heating temperature from 220 to $270^{\circ}C$. Molecular weight changes during the thermal decomposition were monitored by means of the viscosity average molecular weight($\bar{M}v$). The viscosity average molecular weight was determined by Gel Permeation Chromatography(GPC). The dominant process in the degradation of PMMA-PC and PMMA-PS blend were main chain scission randomly due to weak links that may be distributed along the polymer backbone and the initial rate which the bonds are broken is not sustained. The infra-red spectra of degraded PMMA-PS blend show that the presence of aromatic ketone band at $1685cm^{-1}$. However, the infra-red spectra of degraded PMMA-PC blend show that the presence of hydroperoxide band at $3450cm^{-1}$. Thus indicating that the weak links are attacked by oxygen from the air and produce hydroperoxide or ketone. The activation energies of PMMA-PC blend and PMMA-PS blend were 18.2 and 17.9 Kcal/mol, respectively.

• Elastomers and Composites
• /
• 제24권1호
• /
• pp.11-18
• /
• 1989

The thermal degradation of Poly(methyl methacrylate) (PMMA) and poly(acrylonitrile butadiene styrene)(ABS) terpolymer as well as their mixtures were carried out using the thermogravimetry and differential scanning calorimetry(DSC) in the stream of nitrogen and air with 50 ml/min at the various heating rate from 4 to $20^{\circ}C/min$ and temperature from 200 to $300^{\circ}C$ The values of activation energies of thermal degradation determined by TG and DSC in the various PMMA/ABS mixtures were $34{\sim}58Kcal/mol,\;35{\sim}54Kcal/mol$ in the stream of nitrogen. The values of activation energy of ABS20% mixture was appeared high in camparison with addition rule. According to increasing the composition of ABS, the temperatures of glass transition and initial decomposition temperature were increased. PMMA/ABS mixtures by the analysis of infrared spectrophotometer were decomposed by main chain scission in the stream of nitrogen.

• 전기학회논문지
• /
• 제65권9호
• /
• pp.1518-1523
• /
• 2016

In this study, in order to understand the degradation characteristics of oil-paper insulation for power transformers and OF cables, tan delta was measured using cable model specimens with long-term accelerated thermal and electrical aging. In addition, to find out the degradation level due to the accelerated aging, tensile strengths of aged papers were measured. As a result, tan ${\delta}$ showed the characteristics of slight decrease at the first stage and then increase with the aging time, which could be analyzed due to the evaporation of remaining moisture and the change of aging rate with time. Also, the trend of tensile strengths with aging temperature and time was appeared to be exponentially decreased and by use of these data equivalent calculated lifetimes and accelerated aging factors were derived for each aging temperatures. After then, tan ${\delta}$ was analyzed with the equivalent operating years. For all different aging temperatures, the aged data were very well fit to the equivalent operating years and it is shown that tan ${\delta}$ was increased with the decrease of tensile strength.

• 마이크로전자및패키징학회지
• /
• 제24권1호
• /
• pp.67-73
• /
• 2017

열중량 분석(Thermogravimetry)을 이용하여 열화시간 경과에 따른 접착 소재의 열에 대한 열화 특성을 분석하였다. 실험에는 여섯 가지의 온도 승온률에서 측정된 데이터를 이용하여 열화에 따른 동적 반응을 분석하였다. 이 데이터를 바탕으로 아레니우스 방정식을 이용하여 활성 에너지와 비례 상수 등 모델에 필요한 계수를 계산하였다. 또한 열화거동을 예측하는 방정식으로는 무게 감소에 따른 간단한 n차 방정식을 이용하였다. 구해진 예측 모델은 실험 데이터와 비교하여 검증하였다. 계산 결과 각 승온률에 따라 활성화 에너지의 크기가 다름에 따라 평균값을 사용하여 계산한 결과는 낮은 승온률인 경우에는 잘 예측하였지만 높은 승온률인 경우에는 측정값과 차이를 보였다. 이와 같은 문제를 해결하기 위해 지수함수 급수를 이용한 새로운 모델링 방법이 처음 시도되었으며 예측된 결과는 승온률에 관계없이 실험 데이터와 잘 일치하였다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2017년도 추계 학술논문 발표대회
• /
• pp.45-46
• /
• 2017

As the environment and energy problems such as global climate change (global warming, urban heat island phenomenon) and energy depletion have come to the fore, the construction and waterproofing industry are responding more critically to the demands of global green technology and are employing more eco-friendly technologies as of recent. In this study, the application of the waterproofing material with thermal response performance in construction buildings was investigated to confirm whether the thermal performance is being properly secured by the change of the surface temperature. Experimental results showed that the surface temperature difference between before and after the application is at least 19.8℃ at the maximum 26.3℃. When the degradation rate is converted, the degradation effect of about 40% on average was confirmed.

• Tribology and Lubricants
• /
• 제17권3호
• /
• pp.171-178
• /
• 2001

In order to elucidate the lubricating mechanism of polyolester base oils [POEs], the wear characteristics of 27 kinds of polyolester base oils including mixed POEs were investigated. Their wear results were discussed in terms of the effect of molecular structure on wear performance and compared with those of mineral oil. In addition, the adsorption ability of POEs to reduced iron and their hydrolysis rates were measured and the effect of their molecular structures on the adsorptivity and hydrolysis rate of POEs was discussed, respectively. Finally, the lubricating mechanism anlyzed from these results of wear characteristics, adsorptivity and hydrolysis rate was proposed. That is to say, POEs are firstly adsorbed to friction surface and decomposed by hydrolysis or thermal degradation. Fatty acids obtained by degradation of POEs form adsorption film on friction surface. The larger become cohesive ability among fatty acid molecules in the adsorption film, the better gets the wear performance of POEs.

• 한국수소및신에너지학회논문집
• /
• 제10권2호
• /
• pp.81-89
• /
• 1999

Various characteristics - mechanical propertis, thermal cyclic hydriding characteristics and resistance to degradation by $H_2O$, CO in hydrogen - of hydrogen storage alloy powder compacts using PTFE and silicon sealant as a polymer binder were studied. Diametral tensile strength of 10wt% PTFE and 5wt% silicon sealant added compacts showed relatively high value of $4kg/cm^2$ and $10kg/cm^2$, respectively. Compacts show a good resistance to degradation by $H_2O$ in hydrogen. But hydrogen absorption rate and capacity of compacts were decreased by CO in hydrogen with the number of cycles. Cu coated and PTFE bonded compacts showed very small decrease of capacity and a good strength even after 1000 cycles of thermal hydriding and dehydriding.