• 한국재료학회지
• /
• 제30권3호
• /
• pp.142-148
• /
• 2020

Graphene has attracted the interest of many researchers due to various its advantages such as high mobility, high transparency, and strong mechanical strength. However, large-area graphene is grown at high temperatures of about 1,000 ℃ and must be transferred to various substrates for various applications. As a result, transferred graphene shows many defects such as wrinkles/ripples and cracks that happen during the transfer process. In this study, we address transfer-free, large-scale, and high-quality monolayer graphene. Monolayer graphene was grown at low temperatures on Ti (10nm)-buffered Si (001) and PET substrates via plasma-assisted thermal chemical vapor deposition (PATCVD). The graphene area is small at low mTorr range of operating pressure, while 4 × 4 ㎠ scale graphene is grown at high working pressures from 1.5 to 1.8 Torr. Four-inch wafer scale graphene growth is achieved at growth conditions of 1.8 Torr working pressure and 150 ℃ growth temperature. The monolayer graphene that is grown directly on the Ti-buffer layer reveals a transparency of 97.4 % at a wavelength of 550 nm, a carrier mobility of about 7,000 ㎠/V×s, and a sheet resistance of 98 W/□. Transfer-free, large-scale, high-quality monolayer graphene can be applied to flexible and stretchable electronic devices.

• Elastomers and Composites
• /
• 제51권1호
• /
• pp.1-9
• /
• 2016

Characterization of the UV oxidation for raw natural rubber (NR) was investigated in controlled conditions through image and FT-IR analysis. The UV oxidation was performed on a thin film of natural rubber coated on a KBr window at 254 nm and room temperature to exclude the thermal oxidation. Before or after exposure to UV light, image of the NR thin film was observed at a right or tilted angle. FT-IR absorption spectra were measured in transmission mode with the UV irradiation time. The UV oxidation of NR was examined by the changes of absorption peaks at 3425, 1717, 1084, 1477, 1377, and $833cm^{-1}$ which were assigned to hydroxyl group (-OH), carbonyl group (-C=O), carbon-oxygen bond (-C-O), methylene group $(-CH_2-)$, methyl group $(-CH_3)$, and cis-methine group $(cis-CCH_3=CH-)$, respectively. During the initial exposure period, the results indicated that the appearance of carbonyl group was directly related to the reduction of cis-methine group containing carbon-carbon double bond (-C=C-). Most of aldehydes or ketones from carbon-carbon double bonds were formed very fast by chain scission. A lot of long wide cracks with one orientation at regular intervals which resulted in consecutive chain scission were observed by image analysis. During all exposure periods, on the other hand, it was considered that the continuous increment of hydroxyl and carbonyl group was closely related to the decrement of methylene and methyl group in the allylic position. Therefore, two possible mechanisms for the UV oxidation of NR were suggested.

• 멤브레인
• /
• 제24권6호
• /
• pp.438-447
• /
• 2014

무정형의 괴상의 다공성 borosilicate는 trimethylborate (TMB)/ tetraethylorthosilicate (TEOS) 몰비 0.01~0.10 겔체를 $700{\sim}800^{\circ}C$ 온도범위에서 열처리 하였을 때 얻어졌다. BET와 SEM 관찰에 의하면 $700{\sim}800^{\circ}C$에서 얻어진 borosilicate의 표면적은 $251.12{\sim}355.62m^2/g$이고, 기공직경은 3.5~4.9 nm이며, 입자크기는 30~60 nm이었다. TGA측정에 의하면 borosilicate가 poly[1-(trimethylsilyl)propyne](PTMSP)에 첨가되었을 때 PTMSP-borosilicate 복합막의 열적 안정성은 향상 되었다. SEM관찰에 의하면 borosilicate는 $1{\mu}m$ 크기로 복합막 내에 분산되어 있었다. 기체투과실험에 의하면 PTMSP에 borosilicate 함량이 증가하면 자유부피, 공동, 기공률이 증가하여 기체투과가 용해확산에 의한 것보다 분자체거름, 표면확산, Knudsen 확산에 의해 일어나는 경우가 점차 증가함으로 해서 $H_2$와 $N_2$의 투과도는 증가하고 선택도($H_2/N_2$)는 감소하였다.

• 한국압력기기공학회 논문집
• /
• 제6권2호
• /
• pp.20-27
• /
• 2010

In order to prevent the corrosion of component contacted primary water designed alloy 600 material in the nuclear power plant. But the primary water stress corrosion cracking(PWSCC) of alloy 600 and weld area occurs continuously due to the residual stress. The leakage accident resulted from PWSCC in the drain nozzle of the steam generator of domestic power plants. Heater sleeves of the pressurizer are welded with alloy 600 weld material and therefore exposed to the primary water environment. PWSCC occurred in heater sleeve material and weld area of many foreign power plants. The current issue of domestic nuclear power plants are consequently concentrated to PWSCC of similar material. In order to improve the detection and the sizing of the PWSCC in the welding sleeve of the pressurizer, the automatic UT system and multi-directions probe sets have been developed. The experimental studies have been performed using the mock-up block containing artificial reflectors(ID connected EDM notch) and semi-artificial cracks made from thermal fatigue. The automatic UT System is applied in the detection and the length sizing of the ID/OD on the tube and the J-groove weld area of the artificial reflectors and results of the detection and the sizing are compared respectively. Also, the developed automatic UT system is successfully accomplished to inspect the heater sleeve and the J-groove weld area on the pressurizer for the detection of PWSCC.

• 한국결정성장학회지
• /
• 제20권1호
• /
• pp.30-34
• /
• 2010

중고온용 열전 소재로 우수한 특성을 나타내는 $CoSb_3$계 소재의 열전 소자 제조를 위해 방전플라즈마 소결법을 이용하여 소결 및 Cu-Mo 전극 소재와의 접합을 동시에 실시하였다. $CoSb_3$ 내부로의 Cu 확산을 방지하기 위해 Ti을 중간층으로 삽입하였으며 열팽창계수의 조절을 위해 Cu : Mo = 3 : 7 부피비 조성을 선택하였다. 삽입된 Ti과 $CoSb_3$는 $TiSb_2$ 이 차상을 형성하면서 접합이 진행되었지만 접합 온도 및 접합 시간의 증가에 따라 TiSb 및 TiCoSb 등의 상의 형성에 의해 접합 계면에서 균열이 발생되어 접합 특성을 악화시키는 것으로 밝혀졌다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 춘계 학술발표회 제20권1호
• /
• pp.609-612
• /
• 2008

마그네시아 인산염 시멘트를 사용한 보수용 모르타르의 접착강도 특성을 검토하기 위하여 모의 부재 시험체를 이용한 실험을 실시하였다. 접착강도 실험 결과 칩핑 처리를 한 시험체가 표면 처리를 한 시험체 보다 우수한 강도발현을 하였으며, 건식처리가 습식처리보다 우수한 강도발현을 하는 것으로 나타났다. 칩핑 건식 시험체의 경우 온도에 관계없이 재령 28일의 접착강도는 3.0MPa 이상의 높은 강도를 발현을 하는 것으로 나타나 일반 모르타르의 접착강도와 비교 시 매우 높은 접착성능으로써 우수한 접착성능이 요구되는 보수재료로서의 활용을 기대할 수 있을 것으로 판단된다.

• Elastomers and Composites
• /
• 제44권1호
• /
• pp.63-68
• /
• 2009

여름철 아스팔트의 표면 온도 상승으로 인한 도로의 소성변형과 겨울철 온도 강하로 인한 도로균열이 도로안전운전을 위협하는 문제로 등장하면서 아스팔트 물성향상을 위한 아스팔트개질의 필요성이 대두되고 있다. 본 연구에서는 소성변형 저항성을 증가시키기 위해 소성변형의 직접적인 원인인 햇빛을 이용하기 위해, 고분자중합에 사용되는 광개시제를 사용하여 개질아스팔트를 제조하였다. 인장시험기와 레오미터를 이용하여 기계적 물성과 유변적 물성을 실험한 결과 개질아스팔트는 자외선에 의한 분자간 결합으로 인해 인장강도와 저장탄성률이 크게 증가하였다. 열분석에서는 온도에 따른 잔류 무게 분율이 증가하는 거동을 보여 분자간 결합이 가교반응의 결과임을 나타내었다. 장시간 자외선조사 시험에서는 조사시간이 길어짐에 따라 그 물성이 증가되거나 유지되는 거동을 보임으로써 사용수명이 연장될 수 있는 효과를 나타내었다.

• Elastomers and Composites
• /
• 제53권3호
• /
• pp.124-130
• /
• 2018

Recently, microwaves have been used for desulfurization because they can selectively dissociate C-S and S-S bonds present in vulcanized rubber. In this study, we investigated the changes in structural and physical properties of EPDM (Ethylene propylene diene monomer) rubber by irradiating it with microwaves for different durations. The surface chemical composition of the irradiated EPDM rubber was analyzed by FT-IR, XPS, and EDS analyses. It was confirmed by XPS that C-S and S-S S2p peak heights greatly decreased when microwave irradiation was performed for more than 5 min. In the EPDM sample irradiated with microwaves for 10 min, the number of S-O bonds significantly increased owing to oxidation. As the microwave irradiation time was increased, SEM images showed cracks and voids on the EPDM surface. The 20% decomposition temperature of the EPDM rubber sample was investigated by TGA, and it was found to be about $435.23^{\circ}C$ for the EPDM rubber irradiated for 10 min. The crosslinking density of the EPDM rubber was determined by measuring the degree of swelling, and the highest value was observed for the E5 sample irradiated for 5 min. The degree of swelling of the E10 sample irradiated for 10 min was lower than that of the E5 sample. These results indicate that when irradiated with microwaves for more than a certain time, desulfurization occurs and the side chain of the EPDM rubber dissociates and forms additional crosslinking bonds.

• 한국건축시공학회지
• /
• 제15권4호
• /
• pp.383-389
• /
• 2015

ALC 블록(0.6품) 성능 수준의 습식형 경량 기포콘크리트 배합설계 제시를 위하여 7배합의 섬유가 혼입된 기포콘크리트 배합실험을 수행하였다. 수화열에 의한 온도균열제어를 위해 결합재에 고로슬래그를 30% 치환하였으며, 기포콘크리트의 균열저항성을 높이기 위하여 PVA 및 PA섬유를 혼입하였다. 고로슬래그를 30% 치환한 결합재는 시멘트 100% 대비 최대 열발생률 및 콘크리트 내부 최고 온도를 각각 28% 및 9% 저감시킬 수 있었다. 실험결과 섬유가 혼입된 경량기포 콘크리트의 압축강도, 공극분포, 휨 강도를 고려하면 PVA 및 PA 섬유 $0.6kg/m^3$ 혼입이 추천될 수 있었다.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2001년도 추계학술발표회 초록집
• /
• pp.35-35
• /
• 2001

agnesium Oxide (MgO) with a NaCI structure is well known to exhibit high secondary electron emission, excellent high temperature chemical stability, high thermal conductance and electrical insulating properties. For these reason MgO films have been widely used for a buffer layer of high $T_c$ superconducting and a protective layer for AC-plasma display panels to improve discharge characteristics and panel lifetime. Up to now MgO films have been synthesized by lE-beam evaporation, Molecular Beam Epitaxy (MBE) and Metalorganic Chemical Vapor Deposition (MOCVD), however there have been some limitations such as low film density and micro-cracks in films. Therefore magnetron sputtering process were emerged as predominant method to synthesis high density MgO films. In previous works, we designed and manufactured unbalanced magnetron source with high power density for the deposition of high quality MgO films. The magnetron discharges were sustained at the pressure of O.lmtorr with power density of $110W/\textrm{cm}^2$ and the maximum deposition rate was measured at $2.8\mu\textrm{m}/min$ for Cu films. In this study, the syntheses of MgO films were carried out by unbalanced magnetron sputtering with various $O_2$ partial pressure and specially target power densities, duty cycles and frequency using pulsed DC power supply. And also we investigated the plasma states with various $O_2$ partial pressure and pulsed DC conditions by Optical Emission Spectroscopy (OES). In order to confirm the relationships between plasma states and film properties such as microstructure and secondary electron emission coefficient were analyzed by X-Ray Diffraction(XRD), Transmission Electron Microscopy(TEM) and ${\gamma}-Focused$ Ion Beam (${\gamma}-FIB$).