• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2004년도 추계학술발표회 논문집
• /
• pp.143-152
• /
• 2004

Researchers seeking geological and environmental information, depend on remote sensing and aerial photographic datum from various commercial satellites and aircraft. However, adverse weather conditions as well as equipment expense limit the ability to collect data anywhere and anytime. To allow for better flexibility in geological and environmental data collection, we have developed a compact, multi-spectral automatic Aerial Photographic system (PKNU2). This system's Multi-spectral camera can record visible (RGB) and infrared (NIR) band (3032＊2008 Pixels) images Visible and infrared band images were obtained from each camera respectively and produced color-infrared composite images to be analyzed for the purpose of the environmental monitoring. However this did not provide quality data. Furthermore, it has the disadvantage of having the stereoscopic overlap area being 60% unsatisfied due to the 12 seconds of storage time of each data The PKNU2 system in contrast, photographed photos of great capacity Thus, with such results, we have been proceeding to develop the advanced PKNU2 (PKNU3) system that consists of a color-infrared spectral camera that can photograph in the visible and near-infrared bands simultaneously using a single sensor, a thermal infrared camera, two 40G computers to store images, and an MPEG board that can compress and transfer data to the computer in real time as well as be able to be mounted onto a helicopter platform.

• Design & Manufacturing
• /
• 제2권6호
• /
• pp.38-42
• /
• 2008

Recently, the demands of digital camera and miniature camera module for mobile-phone is increased significantly. Lenses which is the core component of optical products are made by the injection molding(plastic lens) or GMP(glass lens). Plastic lens is not enough to improve the resolution and performance of optic parts. Therefore, the requirement of glass lens is increased because it is possible to ensure the high performance and resolution. In this paper, the thermal stress analysis of 3 cavity GMP mold for molding glass lens was performed for estimating the thermal stress and amount of deformation. Finally, the modification plan based on the analysis results was deducted.

• 한국정보전자통신기술학회논문지
• /
• 제11권6호
• /
• pp.664-670
• /
• 2018

현대 사회는 감시의 눈이라 하는 CCTV가 일상생활 속에서 다양한 방법으로 영상데이터를 수집하기 위해 사용되고 있다. 치안 및 감시, 방범용으로 CCTV를 활용할 뿐만 아니라 자동차에 블랙박스 등 많은 분야에서 활용되고 있다. 본 논문에서는 STM32F407 ARM 칩을 기반으로 다양한 분야에 응용할 수 있는 카메라 시스템을 개발하기 위해 연구를 진행하였다. 카메라 시스템 개발을 위해 솔리드 웍스 환경에서 전체적인 구조를 3D를 기반으로 카메라 시스템을 모델링을 진행하였다. PCB 보드 설계는 카메라 시스템 모델링 파일에서 PCB 부품을 iges 파일로 추출하여 Altium Designer 툴에서 3D와 2D 보드로 변환하여 PCB 설계 진행함으로써 완성도 높은 조립성을 가질 수 있도록 진행하였다. 카메라 시스템 회로 및 PCB를 설계한 후, TRM(Thermal Risk Management) 툴을 활용해서 보드에서 발생하는 발열 시뮬레이션을 진행을 통해 대처할 수 있도록 함으로써 안정적인 시스템 구현에 관한 연구를 진행하였다.

• Archives of Plastic Surgery
• /
• 제44권3호
• /
• pp.243-247
• /
• 2017

Reconstruction of the lower limb presents a complex problem after skin cancer surgery, as proximity of skin and bone present vascular and technical challenges. Studies on vascular anatomy have confirmed that the vascular plane on the lower limb lies deep to the deep fascia. Yet, many flaps are routinely raised superficial to this plane and therefore flap failure rates in the lower limb are high. Fascio-cutaneous flaps based on perforators offer a better cosmetic alternative to skin grafts. In this paper, we detail use of a thermal imaging camera to identify perforator 'compartments' that can help in designing such flaps.

• KIEAE Journal
• /
• 제17권2호
• /
• pp.5-12
• /
• 2017

Purpose: Under the purpose of presenting the adequate remodeling period for the improvement of thermal insulation performance of external walls in deteriorated buildings, the change in external wall and residential environment problem(dew condensation) due to aged deterioration after the apartments were constructed in Korea were analyzed. Method: Temperature Difference Ratio Outside(TDRo) and Heat Flow Meter(HFM) were used as measurement methods to evaluate the thermal insulation performance of deteriorated buildings. For TDR evaluation, thermo-graphic camera was used to measure and analyze the surface temperature of external wall. Also, dew condensation evaluation was analyzed using the Temperature Difference Ratio Inside(TDRi). Result: As a result of analyzing thermal performance through TDRo, the first decline point of thermal insulation performance began after 14-16 years have passed since construction was completed, and after 20 years have passed the decline point of thermal insulation performance reappeared. As a result of analyzing U-value with HFM measurement method, the decline rate of external wall's thermal insulation performance is lower than 2% in average at around 5 years after completion, and 8.7% in average at 10-15 years, and over 10.2% in average at 20 years.

• 한국전기전자재료학회논문지
• /
• 제27권2호
• /
• pp.91-96
• /
• 2014

Aspheric lenses used in the thermal imaging are typically fabricated using expensive single-crystal materials (Ge and ZnS, etc.) by the costly single point diamond turning (SPDT) process. As a potential solution to reduce cost, compression molding method using chalcogenide glass has been attracted to fabricate IR optic. Thermal deformation of a molded lens should be compensated to fabricate chalcogenide aspheric lens with form accuracy of the submicron-order. The thermal deformation phenomenon of molded lens was analyzed ant then compensation using mold iteration process is followed to fabricate the high accuracy optic. Consequently, it is obvious that compensation of thermal deformation is critical and useful enough to be adopted to fabricate the lens by molding method.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 춘계 학술발표회
• /
• pp.1324-1333
• /
• 2010

This paper is used in a recent civil engineering field in three-dimensional laser-meter tiles using thermal imaging cameras for the weathered rock slopes precisely measured indirectly, to the degree that began in the will. In the field is difficult to access the degree of weathering of the rock slope to the existing direct way to compensate for the shortcomings of 3D Terrestrial Laser Scanner and weathering characteristics of rocks using thermal imaging cameras to get the information to analyze the degree of rock weathering is. Intensity of 3D TLS and the thermal camera with image analysis to analyze the degree of weathering of bedrock in the field of core drilling targeting indoor laboratory tests were analyzed through the study. Granite, gneiss, sandstone, much of the cancerous samples, each experiment has a 40 per category, each of which 30 were used to analyze the data collected. That degree of rock weathering, the rock, depending on the strength of the Intensity values can change, depending on the level of thermal imaging camera, also weathered the changes in temperature could see. Intensity is the strength of weak rocks, the more value decrease, the temperature of the thermal imaging camera through the swell Intensity and notice that the temperature had an inverse relationship. Intensity value of the low strength of weak rock, but the value came out of the rocks have been proved to be largely dependent on the contrast. The contrast of the surface rocks are weathered dark Intensity values lower temperature to swell the contrary, the degree of weathering can be distinguished.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 제4회 영호남학술대회 논문집
• /
• pp.69-72
• /
• 2002

The conventional thermal insulator and power transformer testing is widely used in surface aging measurement of outside insulator because those testing can carry out very short time in Lab testing. Also thermal testing is able to offer the standard judgement of relative degradation level of outside HV machine. There it is very useful method compare to previous conventional thermal testing method and effective Lab testing method. But surface discharges(SD) have very complex characteristics of discharge pattern so it is required estimation research to development of precise analysis method. In recent, the study of IRR-camera is carrying out discover of temperature of power equipment through condition diagnosis and system development of degradation diagnosis. In this study, thermal testing of power transformer is measured with partial temperature distribution in real time.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.55-58
• /
• 2005

During braking at a train, thermal energy is generated due to the frictions between disk and lining and wheel and shoe. In general, the braking transfers the kinetic energy into thermal energy. Therefore, the frictional characteristics are varied according to the braking force, the thermal resistance, and the thermostable, etc. Using a Dynamo testing we have studied the frictional characteristics and the thermal distribution to investigate a stable speed and to improve the testing method through comparing and analysing in the measurement of the thermocouple temperature and infrared camera.

• 한국산학기술학회논문지
• /
• 제19권3호
• /
• pp.687-692
• /
• 2018

본 논문은 첨단운전자지원시스템(Advanced Driver Assist System, ADAS) 및 자율주행자동차 등에 영상 정보를 제공하는 자동차용 열상카메라를 개발하고 그 영상의 디테일을 향상하기 위한 개선된 기법을 제안한다. 열상카메라는 온도 측정과 야간 영상 확보 등을 목적으로 의료, 산업, 군수 등 다양한 분야에서 활용되고 있다. 스마트자동차에서는 야간 영상 확보를 위하여 적용되고 있다. 첨단운전자지원시스템 및 자율주행자동차 등의 영상 센서로 활용되기 위해서는 객체인식이 가능한 수준의 영상 해상도 및 디테일이 요구된다. 본 논문에서는 자동차에 적용 가능한 $640{\times}480$ 해상도의 열상카메라를 개발하고 영상의 디테일을 향상하기 위한 BDE(Block-Range Detail Enhancement) 기법을 적용한다. 다양한 주행 환경에서 얻어지는 영상 디테일을 향상하기 위하여 대상 픽셀과 주변 8개의 픽셀 간의 Block-Range 값을 계산하여 5단계로 구분하고 각기 다른 Factor를 가감하도록 함으로써 활용도가 높은 영상을 얻을 수 있도록 한다. 개선된 기법은 130mK의 온도 차이까지 구분함으로써 영상의 어두운 부분도 상대적으로 세밀하게 구분하며, 영상의 밝은 부분과 어두운 부분 모두에서 고른 디테일 향상을 보여준다. 개발된 열상카메라와 디테일 향상 기법을 실차에 적용하고 시험하여 제안된 기법의 개선된 결과를 제시한다.