• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2009.05a
• /
• pp.425-428
• /
• 2009

Silicone is recently used for LED chip encapsulment due to its good thermal stability and optical transmittance. To mold a solid-state silicone encapsulment, curing by mixing at elevated temperatures followed by cooling is necessary. As the silicone molding process is involved in healing and subsequent cooling, the thermal residual stress, which causes mechanical warpage or optical birefringence in the final silicone encapsulment, may be induced if there are non-uniformities in cured silicone material properties or encapsulment shape design. The prediction of residual stress is necessary to design a high-quality silicone molding process. Therefore, in the present paper, a numerical parametric study was attempted to evaluate the heating and cooling effects on the thermal residual stress induced in the cured silicone.

• Korean Journal of Optics and Photonics
• /
• v.16 no.5
• /
• pp.456-461
• /
• 2005

We numerically investigate the characteristic of single Nd:YAG rod laser with the convex-plane resonator configuration in order to get the best condition for high efficient intra-cavity second harmonic generation(SHG). The beam quality is analyzed with ABCD matrixes including the thermal lensing characteristic of Nd:YAG rod. The analysis is focused on stability, M2, beam waist and mode-volume of laser beam inside the resonator. The best conditions for SHG is obtained when a laser rod is set near the curved laser mirror.

• Polymer(Korea)
• /
• v.37 no.6
• /
• pp.744-752
• /
• 2013

The miscibility between poly(L-lactide) (PLLA) and poly(methyl methacrylate) (PMMA) was investigated using thermal analyses for the purpose of developing birefringence-free material at oriented state. The effect of methyl acrylate (MA) units as comonomer of PMMA on the miscibility was also studied. All the blends prepared in this study show composition-dependent single $T_g$'s between those of blend components and high transparency over the visible region, indicating the miscibility at molecular level and no discernible effect of MA units on it. No phase separation was observed at elevated temperature of $280^{\circ}C$, higher than the degradation of PLLA and PMMA. The interaction energy density in PLLA/PMMA blends with 17 mol% of MA was measured to be $-0.74J/cm^3$ from the equilibrium melting temperature depression based on the Hoffman-Weeks method. The blends show zero-${\Delta}$n behavior at a specific mixing ratio and the drawing ratio of 3 due to compensation of intrinsic orientation birefringence. Birefringence dispersion of PLLA/PMMA5 blends was also measured to examine the possibility for quarter-wave plates or polarizer protective films.

• Transactions on Electrical and Electronic Materials
• /
• v.6 no.2
• /
• pp.73-77
• /
• 2005

In this study, we investigated response characteristics of liquid crystal display (LCD) with different operating mode of nematic liquid crystals (NLCs) such as 45 $^{circ} twisted nematic (TN), 67.3 $^{circ} TN and electrical controlled birefringence (ECB) on the rubbed polyimide (PI) surface with side chains. The pretilt angles generated on polyimide surfaces of the three kinds of LCD operating modes were about 12 $^{circ} that was higher than those of conventional TN-LCOs. Also, the Electro-optical (EO) performance of these LCOs showed stable condition. Low transmittance of the 45 $^{circ} TN and 67.3 $^{circ} TN cell on the rubbed PI surface were measured by using low cell gap d. The fast response time in ECB cell among the three kinds of LCD operating modes was achieved. Also, thermal ability of fast 90 $^{circ} TN-LCD was investigated. The threshold voltage and the response time of thermal stressed TN-LCOs showed the same performances on no thermal stressed TN-LCOs. There was little change of value in these TN cells. However, the transmittances of TN-LCOs on the rubbed PI surface decreased while increasing thermal stress time. Therefore, the thermal stability of TN-LCD was decreased by the high thermal stress for the long duration.

• Polymer(Korea)
• /
• v.26 no.2
• /
• pp.253-259
• /
• 2002

The objective of this study is to obtain thermally stable and low optical loss polymers for optical waveguiding materials. The crosslinkable poly (maleimide-co-methacrylate)s were synthesized using a pentafluorophenylmaleimide (an optical loss reducer), two methacrylate derivatives (refractive index controllers), and a glycidylmethacrylate (a crosslinker). These copolymers exhibited good thermal stability and could be thermally crosslinked by heat treatment. The refractive indexes of the copolymers could be precisely controlled by the variation of comonomer feed ratio, which was in the range of 1.45 ~ 1.49. These copolymers had very low birefringence of $6{ imes}10^{-4}$ ~ $1{ imes}10^{-4}$. These copolymers were crosslinked by contact printing and then developed by wet etching to obtain high quality waveguide pattern.

• Fibers and Polymers
• /
• v.5 no.4
• /
• pp.264-269
• /
• 2004

The present paper deals with improvement in disperse dyeablility as well as imparting of cationic dyeablility to difficultly dyeable polypropylene by a melt blending technique. Isotactic polypropylene (PP) was blended with fibre grade polybutylene terephthalate (PBT), cationic dyeable polyethylene terephthalate (CDPET) and polystyrene (PS), individually. The resulting binary blends were spun and drawn into fibres at draw ratio 2, 2.5, and 3. The compatibility of blends, structural changes of fibres in terms of X-ray crystallinity, relative crystallinity, sonic modulus, birefringence and thermal stability were examined. The blended fibres were found to be disperse dyeable by the conventional method of high temperature and high pressure dyeing. And this dye ability increased with increase in the level of substitution. PP/CDPET blend also exhibited dyeablility with cationic dyes in addition to that with disperse dyes. The optimum level of blending was predicted keeping in view of tenacity and thermal stability of melt blend fibres. The wash fastness properties of the dyed fibres were found to be of high rate.

• Journal of the Optical Society of Korea
• /
• v.12 no.4
• /
• pp.298-302
• /
• 2008

We have developed a 270-W 15-kHz MOPA system based on side-pumped rod-type Nd:YAG gain modules. The master oscillator is a 3-W 15-kHz $TEM_{00}$ $Nd:YVO_4$ laser with a pulse duration of 30 ns. To preserve the high beam quality during the amplification, we use image relay and polarization rotation which can simultaneously compensate for thermal lensing and thermal birefringence generated in the rod-type gain modules. After the amplification to 270 W with six rod-type gain modules, the beam quality factor ($M^2$) of the amplified laser beam is 5-10, and the pulse duration is maintained at 30 ns.

• Journal of Information Display
• /
• v.10 no.1
• /
• pp.19-23
• /
• 2009

In this paper, we review the proposed liquid crystal display (LCD) with a tunable viewing angle consisting of a conventional liquid crystal display (LCD) panel and a thermally variable retardation layer (TVRL) characterized by uniformly aligned LC film with transparent indium-tin-oxide electrodes for Joule heating. In the TVRL, nematic phase is transitioned into isotropic by Joule heating. The numerical calculation showed that the intrinsic wide viewing angle was achieved at the isotropic phase of the TVRL by Joule heating, whereas the narrow viewing angle was obtained at the nematic phase of the TVRL. The simulated and experimental results of the proposed LCD show continuous and symmetrical viewing angle characteristics by tuning the retardation of TVRL using Joule heating. The structure of the viewing angle control proposed here is adoptable to all LCD modes with wide viewing angle characteristics.

• Journal of the Korean Society of Laryngology, Phoniatrics and Logopedics
• /
• v.9 no.2
• /
• pp.147-151
• /
• 1998

Primary localized laryngeal amyloidosis is an uncommon disorder of unknown cause that occurs in the absence of systemic amyloidosis or associated disease. There is a risk of either missing concomitant systemic amyloidosis or exhaustively investigating for this when it is not present through failure to appreciate the nature of the disease. We present 2 cases of primary localized laryngeal amyloidosis in supraglottic region. Biopsy of the mass of patients revealed findings consistent with amyloidosis, which were Congo red reaction with a apple green birefringence in polarized light fluorescence microscopy. An extensive workup for systemic amyloidosis was negative. All of two cases were treated by vaporization via $CO_2$ LASER using "Swiftlase Flshscan" for creating a wide, shallow char-free treatment site by precisely controlling ablation depth without causing residual thermal damage to tissue. The postoperative recovery of all cases was uneventful with good vocal quality and no aspiration. At the present time, the patients have no evidence of disease, recurrence and complication.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.02a
• /
• pp.314-315
• /
• 2000

레이저 매질은 흡수된 여기 파워에 의해 매질 내부에서 열이 발생하고, 매질 표면을 따라 냉각이 진행되어 매질 내부에서는 불균일한 온도분포가 발생하게 된다.$^{[1,2]}$ 레이저 매질의 굴절율은 온도에 따라 변하기 때문에 열복굴절과 열렌즈 현상이 일어나 레이저 출력의 손실 및 빔질의 저하를 초래하게 된다.$^{[1,3]}$ 선형 편광 광선을 이용하는 고체 레이저는 레이저 매질을 브루스터각으로 가공하거나 공진기 내부쉐 브루스터판을 삽입한다. 따라서, 선형 편광 광선은 열복굴절에 의한 위상 지연으로 타원 편광이 되고, 타원 편광 광선의 s-성분은 브루스터판에서 반사를 일으키게 되어 레이저 출력의 손실을 일으키게 되므로 레이저 공진기를 구성하는데 있어서 정량적인 열영향의 해석이 필요하다$^{[1,2,5]}$ 열영향에 의한 위상 지연은 방위각 방향과 반지름 방향으로 각각 $\Delta$ $n_{\Phi}$, $\Delta$ $n_{r}$ 만큼 생긴 굴절율의 차이로 발생하고 다음과 같이 표현할 수 있다.$^{[1]}$ (중략)이 표현할 수 있다.$^{[1]}$ (중략)