• 방사선산업학회지
• /
• 제4권3호
• /
• pp.271-276
• /
• 2010

Epoxy resin has wide application in various industrial fields because of their good mechanical strength, superiority adhesion and low shrinkage etc. And the typical curing method for epoxy resins is thermal and press compaction. However, a curing method was used electron beam process in this study. Epoxy acrylate was fabricated from mixture of epoxy, acrylic acid, tetraphenylporphyrin (TPP) and hydroquinone monomethyl ether (MEHQ) with mole ratios. Then electron beam irradiation effect on the curing of the epoxy acrylate resin was investigated various absorption dose in nitrogen atmospheres at room temperature. The dynamic mechanical and thermal properties of the irradiated epoxy acrylate resins were characterized using dynamic mechanical analysis (DMA) and thermogravimetric analyzer (TGA). And the tensile and flexural strength were measured by an universal tensile machine (UTM).

• 한국잠사곤충학회지
• /
• 제40권1호
• /
• pp.70-77
• /
• 1998

This study was carried out in order to find out the relationship between physical and chemical properties of silk fiber treated by concentrated calcium nitrate solution. The tensile, thermal and dynamic mechanical properties are also examined on Ca(NO3)2 treated silk fibers. The tensile properties of silk fibers treated by calcium nitrate changed with a concentration. The thermal behavior were also affected by the concentration of calcium nitrate. The degradation temperature (endotherms) and glass transition temperature shifted to lower temperature as the treated concentration increased. It is thought that the physical properties are strongly related to the structure and morphology of Ca(NO3)2 treated silk fibers. As a result, these give property changes with a concentration dependence.

• Earthquakes and Structures
• /
• 제6권2호
• /
• pp.127-140
• /
• 2014

Laminated rubber bearing is very popular base isolation of earthquake engineering pertaining to the passive structural vibration control technologies. Rubber used in fabricating NRB and LRB can be easily attacked by various environmental factors such as oxygen, heat, light, dynamic strain, and organic liquids. Among these factors, this study carried out thermal aging test to investigate the effect of thermal aging on the mechanical properties of laminated rubber bearings in accelerated exposure condition of $70^{\circ}C$ temperature for 168 hours. The compressive-shear test was carried out to identify the variation of compressive and shear properties of the rubber bearings before and after thermal aging. In contrast to tensile strength and elongation tests, the hardness of rubber materials showed the increasing tendency dependent on exposure temperature and period. Based on the test results, the property changes of rubber bearing mainly aged by heat are quantitatively presented.

• Journal of Welding and Joining
• /
• 제24권2호
• /
• pp.57-63
• /
• 2006

In this study, the curing kinetics and thermal degradation of underfill were investigated using differential scanning calorimetry (DSC) and thermo gravimetry analysis (TGA). The mechanical and thermal properties of underfill were characterized using dynamic mechanical analysis (DMA) and thermo-mechanical analysis (TMA). Also, we presented on underfill dispensing process using Prostar tool. The non-isothermal DSC scans at various heating rates, the exothermic reaction peak became narrower with increasing the heating rate. The thermal degradation of underfill was composed of two processes, which involved chemical reactions between the degrading polymer and oxygen from the air atmosphere. The results of fluidity phenomena were simulated using Star CD program, the fluidity of the underfills with lower viscosity was faster.

• 접착 및 계면
• /
• 제6권4호
• /
• pp.12-17
• /
• 2005

Natural fiber/phenolic biocomposites with chopped henequen fibers treated at various levels of electron beam irradiation (EBI) were made by means of a matched-die compression molding method. The interfacial property was explored in terms of interfacial shear strength measured by a single fiber microbonding test. The thermal properties were studied in terms of storage modulus, tan ${\delta}$, thermal expansion and thermal stability measured by dynamic mechanical analysis, thermomechanical analysis and thermogravimetric analysis, respectively. The result showed that the interfacial and thermal properties depend on the treatment level of EBI done to the henequen fiber surfaces. The present result also demonstrates that 10 kGy EBI is most preferable to physically modify the henequen fiber surfaces and then to improve the interfacial property of the biocomposite, supporting earlier results studied with henequen/poly (butylene succinate) and henequen/unsaturated polyester biocomposites.

• Macromolecular Research
• /
• 제14권4호
• /
• pp.416-423
• /
• 2006

The dynamic mechanical thermal properties of poly(hexamethylene terephthalate) (PHT), poly(1,4-cyclohexylenedimethylene terephthalate) (PCT) and their P(HT-co-CT) random copolymers in the amorphous state were examined as a function of temperature and frequency. All the samples exhibited two main relaxation processes in the plot of tan ${\delta}$ versus temperature: the primary ${\alpha}$-relaxation associated with the glass transition and the secondary ${\beta}$-relaxation attributed to the local segmental motions of mostly cyclohexylene rings for PCT and to cooperative motions of methylene, carboxyl, and phenylene groups for PHT. Both ${\alpha}$- and ${\beta}$-relaxation temperatures increased with increasing CT content. The activation energy of the ${\alpha}$-relaxation increased with increasing CT content, whereas that of the ${\beta}$-relaxation decreased. The sub-glassy secondary ${\beta}$-relaxation processes of PCT and PHT were investigated in terms of the cooperativity of main-chain segmental motions.

• 폴리머
• /
• 제25권5호
• /
• pp.691-698
• /
• 2001

에폭시 (diglycidyl ether of bisphenol A: DGEBA), 경화제 (dicyandiamide; DICY), 촉매 (benzyl dimethyl amine : BDMA), 그리고 유기치환된 실리케이트 (organically modified mica type silicate: OMTS)를 용융법 및 용액법을 이용해 나노복합체를 제조하였고, $170^{\circ}C$에서 시간에 따라 경화 반응을 진행하면서 X선 회절분석기 (XRD)와 소각 X선 산란장치 (SAXS)를 이용하여 구조 변화를 관찰하였다. 용융법으로 제조된 치료의 경우 박리된 구조를 관찰할 수 없었으나 용액법에 의해 제조된 경우 박리된 구조를 관찰할 수 있었다. 이는 OMTS 층 내ㆍ외부의 경화 속도차이 때문인 것으로 생각된다. 박리된 에폭시 나노복합체의 OMTS 첨가량에 따른 기계적 물성을 동적기계적 분석기 (DMA)를 이용해 측정한 결과 OMTS의 첨가량이 증가할수록 모둘러스는 증가하였으나 유리전이온도는 큰 차이가 없었다. OMTS 첨가량에 따른 열적 성질을 열중량분석기(TGA)와 한계산소지수 (LOI)를 이용해 측정한 결과 OMTS양이 증가할수록 OMTS 판의 차단효과로 인해 열분해 시작 온도와 LOI 값이 증가하였다.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.373-373
• /
• 2006

Rigid polyurethane foams(PUFs) are widely used in most areas of insulations such as storage tank and pipe line for transporting liquefied gas. Glass fiber and nanoclay are used for improvement in mechanical property and thermal insulation of rigid PUF at very low temperature(<$-150^{\circ}C$). These rigid PUFs have been characterized in terms of thermal, mechanical, dynamic mechanical properties and cell morphology. It was found that mechanical properties, thermal conductivity and dimensional stability of rigid PU foams were improved by glass fiber and nanoclay.

• 폴리머
• /
• 제24권3호
• /
• pp.366-373
• /
• 2000

본 연구에서는 poly(phenylene sulfide)(PPS)와 ABS의 물성을 상호보완하기 위하여 블렌드를 제조하였다. 각 성분간의 상용성을 증진시키기 위하여 소량의 무수말레인산을 ABS에 반응시켜 MABS (ABS-g-MAH)를 제조하였으며, PPS/ABS 및 PPS/MABS 블렌드는 이축 혼련 압출기를 이용하여 용융 흔합하였다. 블렌드에서 ABS의 화학적 개질이 블렌드의 모폴로지와 열적 성질에 미치는 영향을 관찰하였다. PPS/MABS 블렌드의 경우, 각 성분간에 강한 인력이 형성되는 것을 광학현미경과 SEM을 이용하여 확인하였으며, DMA 분석에서는 단일 유리전이 온도를 확인하였다. 또한 화학적으로 개질된 MABS를 사용한 PPS/MABS의 블렌드는 PPS/ABS보다 향상된 열적 성질을 나타내었다.

• 폴리머
• /
• 제24권3호
• /
• pp.358-365
• /
• 2000

Miscibility itnd thermal behavior of blends of synthetic biodegradable aliphatic polyester (Bionolle) with poly(epichlorohydrin) (PECH) were investigated by a differential scanning calorimetry (DSC), a dynamic mechanical thermal analyzer (DMTA) and a rotational rheometer. Observed both single glass transition temperatures from the DSC in agreement with the Fox equation and single T$_{g}$ changes as a function of composition from the DMTA indicate that these blend mixtures are miscible. In addition, the miscibility of this blend system was also observed from the single curve of the Cole-Cole Plot of log G′($\omega$) vs. log C"($\omega$) from the dynamic test using a rotational rheometer. This was further verified from the cryogenically fractured surface of BDP/PECH blends by scanning electron microscopy.