• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 추계학술대회 논문집 학회본부 A
• /
• pp.98-100
• /
• 1999

A thermal analysis was performed for the electromagnet which is installed in the control element drive mechanism(CEDM) of the integral reactor SMART. A model for the thermal analysis of the electromagnet was developed and theoretical bases for the model were established. It is important that the temperature of the electromagnet windings be maintained within the allowable limit of the insulation, since the electromagnet of CEDM is always supplied with current during the reactor operation. So the thermal analysis of the winding insulation which is composed of polyimide and air were performed by finite element method. The thermal properties obtained here will be used as input for the optimization analysis of the electromagnet.

• 한국자동차공학회논문집
• /
• 제11권5호
• /
• pp.29-36
• /
• 2003

Exhaust manifolds suffer from serious temperature variation during the thermal fatigue test. The spatial distribution of temperature changes at each moment. Because transient flow can not be simulated during the long period of temperature change, the simulation can not be performed by conjugate heat transfer analysis. In this study, a new procedure for transient thermal analysis is established by decoupling fluid-solid analysis. The procedure consists of (1) transient CFD calculation (2 cycles), (2) mapping heat transfer coefficient to the inner surface of solid mesh as a boundary condition of heat conduction analysis and (3) transient heat conduction analysis in the long period (30 min). The realistic temperature change can be predicted by this procedure.

• 대한전기학회논문지:전력기술부문A
• /
• 제52권4호
• /
• pp.147-147
• /
• 2003

This paper describes the finite element analysis(FEA) for the design of electromagnet for Control Element Drive Mechanism(CEDM) in System-integrated Modular Advanced Reactor(SMART) and compared with the lifting power characteristics of prototype electromagnet. A thermal analysis was performed for the electromagnet. A model for the thermal analysis of the electromagnet was developed and theoretical bases for the model were established. It is important that the temperature of the electromagnet windings be maintained within the allowable limit of the insulation. since the electromagnet of CEDM is always supplied with current during the reactor operation. So the thermal analysis of the winding insulation which is composed of polyimide and air were performed by finite element method. As a result, it is shown that the characteristics of prototype electromagnet have a good agreement with the results of FEA. The thermal properties obtained here will be used as input for the optimization analysis of the electromagnet.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2017년도 전력전자학술대회
• /
• pp.359-360
• /
• 2017

This paper presents comparison of simulation and experiment in thermal analysis of 3-level PFC. Thermal analysis is necessary to optimize the power conversion system to get higher efficiency. Accordingly, analysis via simulation tools and analytic methods is performed to predict the power losses of converter. Consequently, thermal results of 3-level PFC experiment is compared with thermal analysis.

• 터널과지하공간
• /
• 제4권2호
• /
• pp.102-118
• /
• 1994

Thermomechanical analysis is conducted on the radioactive repository in deep rock mass considering the in-situ stress, excavation and thermal loading of a radioactive waste. Thermomechanical properties of a discontinuous rock mass are estimated by a theoretical method so called sequential analysis. Using the estimated properties as input for finite element analysis, the influence on temperature distribution and thermal stress is analyzed within the scope of 2-dimensional steady state and transient heat transfer and coupled thermal elastic plastic behaviour. Granitic rock mass is taken for this analysis. The analysis is done for two different rock mass conditions, i.e. continuous-homogeneous and highly jointed conditions, for the purpose of comparison. In the case of steady state, the extent of disturbed zone around the storage tunnel due to the heat production of the spent-fuel canister varies depending on the thermomechanical properties of the rock mass. In the case of transient analyses, the response of the jointed rock mass to the thermal loading after radioactive waste disposal varies significantly with time, resulting in dramatic changes in the both size and location of disturbed zone.

• 한국항공우주학회지
• /
• 제39권11호
• /
• pp.1069-1076
• /
• 2011

인공위성이 궤도상에서 임무를 수행하는 동안 모든 위성 부품이 허용 온도 범위 내에서 존재하도록 하기 위하여 검증된 열모델을 개발하고, 궤도 열해석을 통하여 열적 안정성을 확보하기 위한 열설계를 수행한다. 본 연구에서는 저궤도 위성 광학탑재체의 열진공/열평형 시험 결과를 이용하여 열해석 모델을 보정하고 flight heater의 작동주기를 맞추어 줌으로써 검증된 열모델을 확보하였다. 또한 위성의 열적 안정성을 확보하기 위하여 보정이 완료된 모델을 이용하여 궤도 열해석을 수행함으로써 모든 부품이 허용온도 범위내에 존재하는 것을 확인하였다.

• Korean Journal of Radiology
• /
• 제22권10호
• /
• pp.1730-1741
• /
• 2021

Objective: Although thermal ablation is effective in treating low-risk papillary thyroid microcarcinomas (PTMCs), comparison of treatment outcomes between thermal ablation and surgery has not yet been systematically evaluated. This study aimed to compare the efficacy and safety of thermal ablation and surgery for the treatment of low-risk PTMCs. Materials and Methods: Ovid-MEDLINE and EMBASE databases were searched for studies reporting comparisons of treatment results between thermal ablation and surgery for patients with low-risk PTMC published up to April 6, 2020. The analysis evaluated the efficacy (local tumor recurrence, occurrence of new tumor, metastasis, and rescue surgery) and safety (complication rate) of thermal ablation and surgery. Results: This systematic review included four studies with a total of 339 PTMCs in 339 patients who underwent thermal ablation and 320 PTMCs in 314 patients who underwent surgery. There was no local tumor recurrence or distant metastasis in either group. There was no significant difference in the pooled proportion of lymph node metastasis (2.6% with thermal ablation vs. 3.3% with surgery, p = 0.65), occurrence of new tumors (1.4% with thermal ablation vs. 1.3% with surgery, p = 0.85), or rescue surgery (2.6% with thermal ablation vs. 1.6% with surgery, p = 0.62). However, the pooled complication rate was significantly higher in the surgery group than in the ablation group (3.3% with thermal ablation vs. 7.8% with surgery, p = 0.03). Conclusion: Both thermal ablation and surgery are effective and safe options for the management of low-risk PTMCs, with thermal ablation achieving a lower complication rate. Therefore, thermal ablation may be considered as an alternative treatment option for low-risk PTMC in patients who refuse surgery and active surveillance or are ineligible for surgery.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 가을 학술발표회 논문집
• /
• pp.363-368
• /
• 2001

Abutments in Kumdang bridge are massive concrete structures of which total height is l0m, length is 30m, and width is 7m. Therefore, there is every probability that early age thermal cracking such as hydration heat occur. We measure heat of hydration, strains of rebar, and stresses of concrete abutment during construction. Using analysis of measuring data, we examine thermal stresses, and make use of results as method which control thermal cracking. Finally, we develope thermal stress analysis program which have pre/post processor to be easy of accessing and the usefulness of that is estimated through comparison of results.

• 한국전산유체공학회지
• /
• 제7권2호
• /
• pp.43-52
• /
• 2002

This paper presents the numerical methodology of ATHOS3 code for thermal hydraulic analysis of steam generators in nuclear power plant. Topics include porous media approach, governing equations, physical models and correlations for solid-to-fluid interaction and heat transfer, and numerical solution scheme. The ATHOS3 code is applied to the thermal hydraulic analysis of steam generator in the Korea Kori Unit-1 nuclear power plant and the computed results are presented

• Journal of Welding and Joining
• /
• 제19권6호
• /
• pp.658-663
• /
• 2001

Residual stress caused in the weldments with high restraint force are often during welding observed in the weldments of large size nozzles or radial tanks. The reason is that quantitative analysis about thermal stresses during welding is lack for this weldments. To verify FEM theory, the temperature was measured with thermocouple in a real time in this paper. Also analysis of the thermal stress for welding condition is performed by ABAQUS program package on various welding condition in STS butt welding.