• Smart Structures and Systems
• /
• 제5권6호
• /
• pp.591-612
• /
• 2009

New insights are presented in simplified modeling and analysis of free vibrations of piezoelectric - based smart structures and systems. These consist, first, in extending the wide used piezoelectric-thermal analogy (TA) simplified modeling approach in currently static actuation to piezoelectric free-vibrations under short-circuit (SC) and approximate open-circuit (OC) electric conditions; second, the popular piezoelectric strain induced - potential (IP) simplified modeling concept is revisited. It is shown that the IP resulting frequencies are insensitive to the electric SC/OC conditions; in particular, SC frequencies are found to be the same as those resulting from the newly proposed OC TA. Two-dimensional plane strain (PStrain) and plane stress (PStress) free-vibrations problems are then analyzed for above used SC and approximate OC electric conditions. It is shown theoretically and validated numerically that, for both SC and OC electric conditions, PStress frequencies are lower than PStrain ones, and that 3D frequencies are bounded from below by the former and from above by the latter. The same holds for the modal electro-mechanical coupling coefficient that is retained as a comparator of presented models and analyses.

• 한국추진공학회지
• /
• 제26권2호
• /
• pp.1-11
• /
• 2022

일반적인 축소 확대형 초음속 노즐에 대한 열해석에서 경계조건으로 사용되는 벽면의 열전달 계수는 노즐 전체의 열해석 정확도에 영향을 미친다. 이에 많은 열전달계수 도출 방법이 제안되어 왔으며, 본 연구에서는 각각의 기법들을 실제 실험 조건에서 열전달 계수를 계산하고 비교하고자 하였다. 이를 위해 기 수행된 벽면 등온 노즐의 열전달실험에 대해 이론 기반의 analogy 기법과 반경험식, 유체전산해석을 통해 열전달 계수를 도출하고 실험결과와 비교하였다. 해석 결과는 반경험식들은 전반적으로 다른 방법에 비해 대류 열전달 계수를 과도하게 예측하고, Prandtl-Taylor analogy 기법과 k-ω SST 모델을 적용한 전산해석 결과가 실험결과와 비교적 잘 일치하는 경향성을 보였다.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2003년도 추계학술발표대회 논문집
• /
• pp.95-98
• /
• 2003

In woven or knitted preforms for composites, the yams are often twisted for avoiding damage due to the contact with the textile machine elements. When the preforms of twisted yams are used in carbon/carbon composites, the thermal conductivity of the composites varies depending upon the degree of the yarn twist. This paper presents a thermal conductivity model of spun yarn composites. The thermal-electrical analogy and the averaging technique have been adopted in this analysis. The model prediction has been correlated with experimental results in order to confirm the model predictability. Parametric study has also been conducted to examine the effect of the yam twist on the thermal conductivity of spun yarn composites.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2001년도 춘계학술발표대회 논문집
• /
• pp.238-243
• /
• 2001

This paper predicted the thermal conductivity of spatially reinforced composites(SRC) by applying the volume averaging method and the thermal resistance method. The former method employs existing micro-mechanical theories and conventional transformation rules to constitute relations for the unit cells of the composites and the latter one uses the analogy between the diffusion of heat and electrical charge. To verify the theoretical prediction, the thermal conductivity of 4-D(dimensional) SRC was examined experimentally. The comparison of the numerical results with those measured by the experiment showed good agreement.

• Composites Research
• /
• 제30권1호
• /
• pp.26-34
• /
• 2017

본 연구에서는 직물섬유 복합재의 열전도를 구하는데 있어 기존의 연구보다 개선된 방법을 제시하고, 직물섬유의 기하학적 구조가 복합재의 열전도도 향상에 미치는 영향, 그리고 유전 알고리즘(Genetic algorithm)을 이용하여 복합재의 열전도도 향상을 위한 최적구조 설계에 관한 연구를 하였다. 직물섬유의 구조를 토우의 물결무늬와 너비 및 두께를 이용하여 구현하였고, 열전도도는 열전기유사법(Thermal-electrical analogy)을 이용하여 구하였다. 유전 알고리즘에서 염색체 문자열은 fill과 warp tow의 두께와 너비로 하였고 복합재의 열전도도를 향상 시키는 방향으로 목적함수를 정하였다. 연구결과 직물섬유 복합재의 열전도도를 예측을 위한 향상된 방법이 제시되었고, 섬유토우 사이의 간격(inter-tow gap)이 넓어 질수록 복합재의 열전도도가 감소하는 것으로 나타났다. 직물섬유 복합재의 구조 최적화에서는 이론적 수치해석 결과가 제시되었는데, 전체적으로 섬유토우(tow)의 축의 수직방향보다는 축 방향의 열전도도 성분이 복합재의 전체 열전도도 향상에 크게 기여를 하는 것으로 나타났다.

• 대한조선학회논문집
• /
• 제43권2호
• /
• pp.236-245
• /
• 2006

The ventilation performance for the various venting duct arrays has been experimentally compared in the scaled model of the container hold. Most container ships have the ventilation duct system to remove effectively the condensing heat released from container refrigerator. The existing duct system is vertically installed and basically has the number of duct as many as the columns of reefer container stack. In this study, to make up for the weak points having stagnantly hot legions in the centered area of container hold for the present system, the horizontal upward jotting duct system was proposed and proved by temperature rising tests on the scaled model. In this paper, the expected flow regimes and the thermal and hydrodynamic analogies as well as the measured temperature distributions in a hold for various duct types and heat released rates are deeply discussed.

• 한국생산제조학회지
• /
• 제8권1호
• /
• pp.28-34
• /
• 1999

According to the development of tool material and the improvement of machinability of cutting material like aluminium alloy, the higher spindle speed is needed. However, the higher speed causes the heat generation of bearings, the deformation of spindle unit parts, and the rotational accuracy of spindle to be worse. Therefore, it is essential to analyze and control the heat generation and the thermal behavior of spindle unit in order to have higher speed and better rotational accuracy. This paper shows the analogy between the analyzation of heat generation and thermal behavior of high speed spindle system by finite element method and the test results of actual temperature rise through running test, and shows the necessity of cooling the spindle and inner ring side of bearings for the thermal balance of high speed spindle system.

• Composites Research
• /
• 제14권3호
• /
• pp.57-68
• /
• 2001

본 연구에서는 체적평균 개념과 열저항 개념을 적용하여 공간적으로 보강된 복합재료의 열전도계수를 예측하였다. 체적평균 개념을 적용한 방법은 기존의 미소기계적 이론들과 좌표변환관계를 이용하고, 열저항 개념을 적용한 방법은 열과 전자의 확산에 대한 유사성을 이용하여 SRC의 단위구조의 열전도계수에 대한 구성방정식을 얻었다. 이론적 예측을 검증하기 위해 4-D SRC에 대해 실험을 수행하였으며, 예측결과와 실험결과가 잘 일치함을 보였다.

• Journal of Electrical Engineering and Technology
• /
• 제12권2호
• /
• pp.576-585
• /
• 2017

Dynamic thermal rating (DTR) of overhead transmission lines can provide a significant increase in transmission capacity compared to the static thermal rating. However, the DTR are usually estimated by the traditional thermal model of overhead conductor that is highly dependent on the solar, wind speed and wind direction data. Consequently, the estimated DTR would be unreliable and the safety of transmission lines would be reduced when the solar and wind sensors are out of function. To address this issue, this study proposed a novel thermal model of overhead conductor based on the thermal-electric analogy theory and Markov chain. Using this thermal model, the random variation of conductor temperature can be simulated with any specific current level and ambient temperature, even if the solar and wind sensors are out of function or uninstalled. On this basis, an estimation method was proposed to determine the DTR in the form of probability. The laboratory experiments prove that the proposed method can estimate the DTR reliably without measured solar and wind data.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1995년도 추계학술발표회논문집(1)
• /
• pp.377-382
• /
• 1995

An evaluation method of spacer grid thermal mixing performance in rod bundles is suggested based on hydraulic tests in a single phase flow. Heat transfer correlation was derived by the analogy between momentum and heat transfer. Three of major factors, such as blockage ratio of spacer grid, convective flow swirling, and turbulent intensity, were found to be significantly influential to the spacer grid thermal mixing performance. Local heat transfer near spacer grid was predicted for the hydraulic test of 6 ${\times}$ 6 rod bundles with neighboring different spacer grids.