• 제목/요약/키워드: theoretical formulae

검색결과 46건 처리시간 0.019초

FTIR 터치스크린 아크릴 계면의 전반사 현상 연구 (A Study on Incompletion of TIR within Acrylate of FTIR Touch Screen)

  • 한지흠;한원흠;윤소영
    • 접착 및 계면
    • /
    • 제14권2호
    • /
    • pp.57-67
    • /
    • 2013
  • FTIR (Frustrated Total Internal Reflection) 터치스크린에서 아크릴 내의 전반사(TIR) 현상이 깨지는 원인을 조사하였다. 먼저 3층 박막(매질1 ($n_1$)-매질2 ($n_2$)-매질3 ($n_3$), $n_1=n_3{\neq}n_2$에서 굴절율의 상대적인 크기에 따라 매질1에서 FTIR 또는 매질1로부터 매질3으로 일반투과(Ordinary Transmission : OT) 현상이 나타남을 확인하고, 이들(FTIR과 OT)의 투과율 이론값은 인접한 두 반사광(또는 투과광)들의 위상차의 실수화 또는 허수화 과정을 통해 서로 전환됨을 이론적으로 유도하였다. 이와 병행하여 터치스크린에 손가락과 같은 외부 접촉에 의해 아크릴판(acrylate) 내에 형성된 전반사 조건이 깨지는 현상을 분석하였다. 이러한 분석과 실험을 토대로, 접촉 인식을 좋게 하기 위한 투명하고 굴절율이 아크릴과 유사한 젖음성 매체(wettable medium)를 적용한 FTIR 터치스크린 구조를 제안하였다.

고속 활주선의 선형에 따른 저항 성능 및 규칙파 중 운동 성능 고찰 (Effects of Hull Form Variations on Resistance and Seakeeping Performance of Planing Hulls with and without Incoming Regular Waves)

  • 김동진;김선영;김성환;서정화;이신형
    • 대한조선학회논문집
    • /
    • 제51권5호
    • /
    • pp.369-379
    • /
    • 2014
  • Planing hull forms have significant influences on those hydrodynamic performances in calm water and in waves. Therefore, the hydrodynamic performance of a planing vessel should be predicted by model tests or theoretical calculations, and be confirmed whether it shows the performance requirements at the design stage. In this study, four planing hull forms are designed with the goal of the improvement of resistance and seakeeping performance, and 1/6.5 scale model tests are carried out in Seoul National University towing tank. The effects of design parameters such as length-to-beam ratio, deadrise angle and forebody shape on the hydrodynamic performance are investigated, based on model test results. Running attitude and resistance of model ships in calm water are also estimated by empirical formulae proposed by Savitsky (1964; 2007; 2012), and compared with the model test results. It is shown that calm water performance of non-prismatic planing hulls can be predicted well by Savitsky (2012)'s formula which improves the original Savitsky(1964/2007)'s formula by taking into account the variations of deadrise angles, and the actual angles between the hull bottom and the free surface.

보강옹벽개발연구 (Study on the Development of Reinforced Earth Retaining Wall)

  • 유용환
    • 한국지반공학회지:지반
    • /
    • 제2권3호
    • /
    • pp.51-66
    • /
    • 1986
  • 본 연구는 재래식 옹벽의 단점을 보완하여 skin element로써 간단한 L-type concrete block을 사용하고 reinforcing strip재로써 plastic fabric strip를 이용하며, back fill재는 우리 주위에서 흔히 접하는 나강암풍화토를 사용하여 만든 보강벽체를 통하여 몇가지 실험을 한 결과 이들 서반재료의 특성을 발안하여 개발된 이론식에 의하여 결정한 벽체의 보강은 삽입한 strip의 간격, 층수, 뒷채움 재의 입도분포, 다짐상태 및 strip의 인장강맥에 좌우되며 본보강옹벽체는 구조적으로 안정하고 경제적인 시공이 가능함이 확인되었으며 우리나라 특히 강원도와 같은 유간지역에서는 보다 효과적으로 이용될 수 있을 것으로 판단된다.

  • PDF

멤피스 디자인을 응용한 실내조명등 표현 연구 -에토레 소트사스 작품 중심으로- (A Study on the Expression of Interior Lighting by Memphis Design -Focused on the works of Ettore Sottsass-)

  • 최정화;노혜신
    • 디지털융복합연구
    • /
    • 제19권2호
    • /
    • pp.415-423
    • /
    • 2021
  • 본 연구는 20세기 이후 다원화된 사회의 모습을 담아냈던 1980년대 멤피스 디자인의 작품들을 분석하고 이를 바탕으로 한 실내 조명등의 조형화 작업으로 대중과 함께 소통할 수 있는 실용 가능한 디자인을 제시하는 것에 그 목적이 있다. 연구 방법으로는 멤피스 그룹의 발생 배경, 멤피스 디자인의 이론적 배경과 조형적 특징을 문헌 및 선행연구를 중심으로 고찰하였다. 이를 기반으로 본 연구에서는 멤피스의 조형적 특성과 색채, 패턴을 응용하여 새롭게 조형화된 디자인을 조명등에 접목시켰다. 기본 도형에 작은 변화를 준 형태들의 조명등은 그것의 기능성과 장식성에 그치지 않고, 인간 내면에 간직된 감성을 들려주는 조형언어로의 확장성을 보여준다. 또한 작품제작에 있어 조형적 변화에 따른 재료의 선택은 새로운 조형예술의 창작 가능성을 제시해 줄 것이다.

토양수분함량 예측 및 계획관개 모의 모형 개발에 관한 연구(I) (A Study on the Development of a Simulation Model for Predicting Soil Moisture Content and Scheduling Irrigation)

  • 김철회;고재군
    • 한국농공학회지
    • /
    • 제19권1호
    • /
    • pp.4279-4295
    • /
    • 1977
  • Two types of model were established in order to product the soil moisture content by which information on irrigation could be obtained. Model-I was to represent the soil moisture depletion and was established based on the concept of water balance in a given soil profile. Model-II was a mathematical model derived from the analysis of soil moisture variation curves which were drawn from the observed data. In establishing the Model-I, the method and procedure to estimate parameters for the determination of the variables such as evapotranspirations, effective rainfalls, and drainage amounts were discussed. Empirical equations representing soil moisture variation curves were derived from the observed data as the Model-II. The procedure for forecasting timing and amounts of irrigation under the given soil moisture content was discussed. The established models were checked by comparing the observed data with those predicted by the model. Obtained results are summarized as follows: 1. As a water balance model of a given soil profile, the soil moisture depletion D, could be represented as the equation(2). 2. Among the various empirical formulae for potential evapotranspiration (Etp), Penman's formula was best fit to the data observed with the evaporation pans and tanks in Suweon area. High degree of positive correlation between Penman's predicted data and observed data with a large evaporation pan was confirmed. and the regression enquation was Y=0.7436X+17.2918, where Y represents evaporation rate from large evaporation pan, in mm/10days, and X represents potential evapotranspiration rate estimated by use of Penman's formula. 3. Evapotranspiration, Et, could be estimated from the potential evapotranspiration, Etp, by introducing the consumptive use coefficient, Kc, which was repre sensed by the following relationship: Kc=Kco$.$Ka+Ks‥‥‥(Eq. 6) where Kco : crop coefficient Ka : coefficient depending on the soil moisture content Ks : correction coefficient a. Crop coefficient. Kco. Crop coefficients of barley, bean, and wheat for each growth stage were found to be dependent on the crop. b. Coefficient depending on the soil moisture content, Ka. The values of Ka for clay loam, sandy loam, and loamy sand revealed a similar tendency to those of Pierce type. c. Correction coefficent, Ks. Following relationships were established to estimate Ks values: Ks=Kc-Kco$.$Ka, where Ks=0 if Kc,=Kco$.$K0$\geq$1.0, otherwise Ks=1-Kco$.$Ka 4. Effective rainfall, Re, was estimated by using following relationships : Re=D, if R-D$\geq$0, otherwise, Re=R 5. The difference between rainfall, R, and the soil moisture depletion D, was taken as drainage amount, Wd. {{{{D= SUM from { {i }=1} to n (Et-Re-I+Wd)}}}} if Wd=0, otherwise, {{{{D= SUM from { {i }=tf} to n (Et-Re-I+Wd)}}}} where tf=2∼3 days. 6. The curves and their corresponding empirical equations for the variation of soil moisture depending on the soil types, soil depths are shown on Fig. 8 (a,b.c,d). The general mathematical model on soil moisture variation depending on seasons, weather, and soil types were as follow: {{{{SMC= SUM ( { C}_{i }Exp( { - lambda }_{i } { t}_{i } )+ { Re}_{i } - { Excess}_{i } )}}}} where SMC : soil moisture content C : constant depending on an initial soil moisture content $\lambda$ : constant depending on season t : time Re : effective rainfall Excess : drainage and excess soil moisture other than drainage. The values of $\lambda$ are shown on Table 1. 7. The timing and amount of irrigation could be predicted by the equation (9-a) and (9-b,c), respectively. 8. Under the given conditions, the model for scheduling irrigation was completed. Fig. 9 show computer flow charts of the model. a. To estimate a potential evapotranspiration, Penman's equation was used if a complete observed meteorological data were available, and Jensen-Haise's equation was used if a forecasted meteorological data were available, However none of the observed or forecasted data were available, the equation (15) was used. b. As an input time data, a crop carlender was used, which was made based on the time when the growth stage of the crop shows it's maximum effective leaf coverage. 9. For the purpose of validation of the models, observed data of soil moiture content under various conditions from May, 1975 to July, 1975 were compared to the data predicted by Model-I and Model-II. Model-I shows the relative error of 4.6 to 14.3 percent which is an acceptable range of error in view of engineering purpose. Model-II shows 3 to 16.7 percent of relative error which is a little larger than the one from the Model-I. 10. Comparing two models, the followings are concluded: Model-I established on the theoretical background can predict with a satisfiable reliability far practical use provided that forecasted meteorological data are available. On the other hand, Model-II was superior to Model-I in it's simplicity, but it needs long period and wide scope of observed data to predict acceptable soil moisture content. Further studies are needed on the Model-II to make it acceptable in practical use.

  • PDF

Nash 모형을 이용한 유역 저류상수 및 집중시간의 이론적 검토 (A Theoretical Review of Basin Storage Coefficient and Concentration Time Using the Nash Model)

  • 유철상
    • 한국수자원학회논문집
    • /
    • 제42권3호
    • /
    • pp.235-246
    • /
    • 2009
  • 본 연구에서는 간단한 단위도 이론인 Nash 모형을 이용하여 유역 저류상수 및 집중시간의 문제를 이론적으로 고찰해 보았다. 먼저, Nash 순간단위도의 저류상수 및 집중시간을 그 정의에 따라 유도하고, 각각의 특성은 물론 둘 사이의 관계를 검토하였다. 추가로, 국내에서 많이 사용되고 있는 저류상수 및 집중시간의 경험공식들을 유도된 Nash 모형의 저류상수 및 집중시간 특성과 비교 검토하였다. 이 과정을 통해 얻은 주요 결과는 다음과 같다. (1) Nash 순간단위도의 집중시간은 선형저수지의 개수에 거의 선형적으로 비례하는 형태를 가지나 저류상수는 비선형적으로 제곱근에 비례하는 형태를 가진다. 즉, 선형저수지의 수를 4배로 증가시키면 집중시간은 약 4배 증가하게 되나 저류상수는 약 2배 증가하는데 그치게 된다. 이러한 결과는 특히 유역분할에 따른 집중시간과 저류상수의 변화를 이해하는데 중요하다. (2) Nash 순간단위도의 집중시간과 저류상수의 관계는 서로 독립적이 아니며, 따라서 두 매개변수가 서로 독립적으로 결정되는 것은 물리적으로 타당하지 않다. 두 매개변수 중 집중시간이 선형저수지의 개수에 보다 민감하므로 이를 먼저 결정하고 저류상수의 경우는 기 결정된 집중시간을 반영하여 결정하는 것이 보다 바람직한 방법으로 이해할 수 있다. (3) 유역의 집중시간과 관련한 경험공식은 크게 선형하천의 개념에 충실한 경우와 그렇지 않은 것으로 나눌 수 있었으며, 각각의 경우에 포함된 식의 형태는 매우 유사한 것으로 나타났다. 이는 집중시간을 결정하는 유역의 특성인자가 대체로 유사함을 의미하며, 또한 유역 전반에 걸쳐 일관된 식의 형태를 적용하는 지역화가 가능함을 의미한다. (4) 유역의 저류상수와 관련해서 검토한 Russell 공식 등의 경우 그 적용범위 설정에 유역의 물리적인 특성을 충분히 고려할 수 있어, 비합리적인 적용은 충분히 배제될 수 있음을 확인할 수 있었다.