• The Korean Journal of Nuclear Medicine Technology
• /
• v.14 no.1
• /
• pp.67-72
• /
• 2010

Purpose: In Asan Medical Center we perform myocardial perfusion SPECT to evaluate cardiac event risk level for non-cardiac surgery patients. In case of patients with cancer, we check tumor metastasis using whole body bone scan and whole body PET scan and then perform myocardial perfusion SPECT to reduce unnecessary exam. In case of short term in patients, we perform $^{201}Tl$ myocardial perfusion SPECT after whole body bone scan a minimum 16 hours in order to reduce hospitalization period but it is still the actual condition in which the evaluation about the affect of the crosstalk contamination due to the each other dissimilar isotope administration doesn't properly realize. So in our experiments, we try to evaluate crosstalk contamination influence on $^{201}Tl$ myocardial perfusion SPECT using anthropomorphic torso phantom and patient's data. Materials and Methods: From 2009 August to September, we analyzed 87 patients with $^{201}Tl$ myocardial perfusion SPECT. According to $^{201}Tl$ myocardial perfusion SPECT yesterday whole body bone scan possibility of carrying out, a patient was classified. The image data are obtained by using the dual energy window in $^{201}Tl$ myocardial perfusion SPECT. We analyzed $^{201}Tl$ and $^{99m}Tc$ counts ratio in each patients groups obtained image data. We utilized anthropomorphic torso phantom in our experiment and administrated $^{201}Tl$ 14.8 MBq (0.4 mCi) at myocardium and $^{99m}Tc$ 44.4 MBq (1.2 mCi) at extracardiac region. We obtained image by $^{201}Tl$ myocardial perfusion SPECT without gate method application and analyzed spatial resolution using Xeleris ver 2.0551. Results: In case of $^{201}Tl$ window and the counts rate comparison result yesterday whole body bone scan of being counted in $^{99m}Tc$ window, the difference in which a rate to 24 hours exponential-functionally notes in 1:0.114 with Ventri (GE Healthcare, Wisconsin, USA), 1:0.249 after the bone tracer injection in 12 hours in 1:0.411 with 1:0.79 with Infinia (GE healthcare, Wisconsin, USA) according to a reduction a time-out was shown (Ventri p=0.001, Infinia p=0.001). Moreover, the rate of the case in which it doesn't perform the whole body bone scan showed up as the average 1:$0.067{\pm}0.6$ of Ventri, and 1:$0.063{\pm}0.7$ of Infinia. According to the phantom after experiment spatial resolution measurement result, and an addition or no and time-out of $^{99m}Tc$ administrated, it doesn't note any change of FWHM (p=0.134). Conclusion: Through the experiments using anthropomorphic torso phantom and patients data, we found that $^{201}Tl$ myocardium perfusion SPECT image later carried out after the bone tracer injection with 16 hours this confirmed that it doesn't receive notable influence in spatial resolution by $^{99m}Tc$. But this investigation is only aimed to image quality, so it needs more investigation in patient's radiation dose and exam accuracy and precision. The exact guideline presentation about the exam interval should be made of the validation test which is exact and in which it is standardized about the affect of the crosstalk contamination according to the isotope use in which it is different later on.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.14 no.2
• /
• pp.110-116
• /
• 2010

Purpose: The X-ray attenuation coefficient based on CT images is used for attenuation correction in PET/CT. The polychromatic X-ray beam can introduce beam-hardening artifact on CT images. The aims of the study were to evaluate the effect of dental metal prostheses in phantom and patients on apparent tracer activity measured with PET/CT when using CT attenuation correction. Materials and Methods: 40 normal patients (mean age $54{\pm}12$) was scanned between Jan and Feb 2010. NEMA(National Electrical Manufactures Association) PET $Phantom^{TM}$ (NU2-1994) was filled with $^{18}F$-FDG injected into the water that insert implant and metal prostheses dental cast. Region of interest were drawn in non-artifact region, bright steak artifact region and dark streak artifact region on the same transaxial CT and PET slices. Patients and phantom with dental metal prostheses and dental implant were evaluated the change rate of CT Number and $SUV_{mean}$ in PET/CT. A paired t-test was performed to compare the ratio and the difference of the calculated values. Results: In patients with dental metal prostheses, $SUV_{mean}$ was reduced 19.64% (p<0.05) in the non-steak artifact region than the brightstreak artifact region whereas was increased 90.1% (p>0.05) in the non-steak artifact region than the dark streak artifact region. In phantom with dental metal prostheses, $SUV_{mean}$ was reduced 18.1% (p<0.05) in the non-steak artifact region than the bright streak artifact region whereas was increased 18.0% (p>0.05) in the non-steak artifact region than the dark streak artifact region. In patients with dental implant, $SUV_{mean}$ was increased 19.1% (p<0.05) in the non-steak artifact region than the bright streak artifact region whereas was increased 96.62% (p>0.05) in the non-steak artifact region than the dark streak artifact region. In phantom with dental implant, $SUV_{mean}$ was increased 14.4% (p<0.05) in the non-steak artifact region than the bright streak artifact region whereas was increased 7.0% (p>0.05) in the non-steak artifact region than the dark streak artifact region. Conclusion: When CT is used for attenuation correction in patients with dental metal prostheses, 19.1% reduced $SUV_{mean}$ is anticipated in the dark streak artifact region on CT images. The dark streak artifacts of CT by dental metal prostheses may cause false negative finding in PET/CT. We recommend that the non-attenuation corrected PET images also be evaluated for clinical use.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.13 no.1
• /
• pp.67-72
• /
• 2009

Purpose: ISCD (International Society for Clinical Densitometry) requests that users perform mandatory Precision test to raise their quality even though there is no recommendation about patient selection for the test. Thus, we investigated the effect on precision test by measuring reproducibility of 3 bone density groups (normal, osteopenia, osteoporosis). Materials and Methods: 4 users performed precision test with 420 patients (age: $57.8{\pm}9.02$) for BMD in Asan Medical Center (JAN-2008 ~ JUN-2008). In first group (A), 4 users selected 30 patient respectively regardless of bone density condition and measured 2 part (L-spine, femur) in twice. In second group (B), 4 users measured bone density of 10 patients respectively in the same manner of first group (A) users but dividing patient into 3 stages (normal, osteopenia, osteoporosis). In third group (C), 2 users measured 30 patients respectively in the same manner of first group (A) users considering bone density condition. We used GE Lunar Prodigy Advance (Encore. V11.4) and analyzed the result by comparing %CV to LSC using precision tool from ISCD. Check back was done using SPSS. Results: In group A, the %CV calculated by 4 users (a, b, c, d) were 1.16, 1.01, 1.19, 0.65 g/$cm^2$ in L-spine and 0.69, 0.58, 0.97, 0.47 g/$cm^2$ in femur. In group B, the %CV calculated by 4 users (a, b, c, d) were 1.01, 1.19, 0.83, 1.37 g/$cm^2$ in L-spine and 1.03, 0.54, 0.69, 0.58 g/$cm^2$ in femur. When comparing results (group A, B), we found no considerable differences. In group C, the user_1's %CV of normal, osteopenia and osteoporosis were 1.26, 0.94, 0.94 g/$cm^2$ in L-spine and 0.94, 0.79, 1.01 g/$cm^2$ in femur. And the user_2's %CV were 0.97, 0.83, 0.72 g/$cm^2$ L-spine and 0.65, 0.65, 1.05 g/$cm^2$ in femur. When analyzing the result, we figured out that the difference of reproducibility was almost not found but the differences of two users' several result values have effect on total reproducibility. Conclusions: Precision test is a important factor of bone density follow up. When Machine and user's reproducibility is getting better, it’s useful in clinics because of low range of deviation. Users have to check machine's reproducibility before the test and keep the same mind doing BMD test for patient. In precision test, the difference of measured value is usually found for ROI change caused by patient position. In case of osteoporosis patient, there is difficult to make initial ROI accurately more than normal and osteopenia patient due to lack of bone recognition even though ROI is made automatically by computer software. However, initial ROI is very important and users have to make coherent ROI because we use ROI Copy function in a follow up. In this study, we performed precision test considering bone density condition and found LSC value was stayed within 3%. There was no considerable difference. Thus, patient selection could be done regardless of bone density condition.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.21 no.1
• /
• pp.44-49
• /
• 2017

Purpose Radiation exposure management has been strictly regulated for the radiation workers, but there are only a few studies on potential risk of radiation exposure to non-radiation workers, especially nurses in a general ward. The present study aimed to estimate the exact total exposure of the nurse in a general ward by close contact with the patient undergoing nuclear medicine examinations. Materials and Methods Radiation exposure rate was determined by using thermoluminescent dosimeter (TLD) and optical simulated luminescence (OSL) in 14 nurses in a general ward from October 2015 to June 2016. External radiation rate was measured immediately after injection and examination at skin surface, and 50 cm and 1 m distance from 50 patients (PET/CT 20 pts; Bone scan 20 pts; Myocardial SPECT 10 pts). After measurement, effective half-life, and total radiation exposure expected in nurses were calculated. Then, expected total exposure was compared with total exposures actually measured in nurses by TLD and OSL. Results Mean and maximum amount of radiation exposure of 14 nurses in a general ward were 0.01 and 0.02 mSv, respectively in each measuring period. External radiation rate after injection at skin surface, 0.5 m and 1 m distance from patients was as following; $376.0{\pm}25.2$, $88.1{\pm}8.2$ and $29.0{\pm}5.8{\mu}Sv/hr$, respectively in PET/CT; $206.7{\pm}56.6$, $23.1{\pm}4.4$ and $10.1{\pm}1.4{\mu}Sv/hr$, respectively in bone scan; $22.5{\pm}2.6$, $2.4{\pm}0.7$ and $0.9{\pm}0.2{\mu}Sv/hr$, respectively in myocardial SPECT. After examination, external radiation rate at skin surface, 0.5 m and 1 m distance from patients was decreased as following; $165.3{\pm}22.1$, $38.7{\pm}5.9$ and $12.4{\pm}2.5{\mu}Sv/hr$, respectively in PET/CT; $32.1{\pm}8.7$, $6.2{\pm}1.1$, $2.8{\pm}0.6$, respectively in bone scan; $14.0{\pm}1.2$, $2.1{\pm}0.3$, $0.8{\pm}0.2{\mu}Sv/hr$, respectively in myocardial SPECT. Based upon the results, an effective half-life was calculated, and at 30 minutes after examination the time to reach normal dose limit in 'Nuclear Safety Act' was calculated conservatively without considering a half-life. In oder of distance (at skin surface, 0.5 m and 1 m distance from patients), it was 7.9, 34.1 and 106.8 hr, respectively in PET/CT; 40.4, 199.5 and 451.1 hr, respectively in bone scan, 62.5, 519.3 and 1313.6 hr, respectively in myocardial SPECT. Conclusion Radiation exposure rate may differ slightly depending on the work process and the environment in a general ward. Exposure rate was measured at step in the general examination procedure and it made our results more reliable. Our results clearly showed that total amount of radiation exposure caused by residual radioactive isotope in the patient body was neglectable, even comparing with the natural radiation exposure. In conclusion, nurses in a general ward were much less exposed than the normal dose limit, and the effects of exposure by contacting patients undergoing nuclear medicine examination was ignorable.

• Journal of the Korean Society for Library and Information Science
• /
• v.16
• /
• pp.281-327
• /
• 1989

This dissertation is presented in two major parts. The first part presented in Chapter 3 attempts to verify the major hypothesis of the present study that the research and development laboratories(hereafter referred to R&D laboratories), establishd withine industrial firms to develop new technologies needed for their own industrial activities, may have another but very important functions to bring information on the externally generated technologies to attention of their respective management decision makers, eventually resulting in the transfer of technology; and such information functions of the R&D laboratories may be better performed by well-organised laboratories than by poorly-organised ones. The second part presented in Chapters 4, 5, 6 and 7 discusses, after the preceding hypotheses has been verified, some desirable situations of the R&D laboratories in facilitating the flow of information on new technologies developed in the world into their industrial firms, centering on the organisational positions and the major fields of interest of the person in charge of the R&D centers, services of the library and technological information office supporting the R&D laboratories, and frequencies of direct contacts of research and development workers with experts in the world and of participation in various conferences, seminars, workshops, exhibitions, etc. Now that there is no recognised instrument and method available for direct measurement of volume of technological information transfered into a particular industrial firm, the number of technologies introduced into a given firm is employed in the present study as an analogous parametre indicating volume of technological information transfered into the firm during a particular period of time. A logical attempt to justify the use of the indirect paramentre is made in Chapter two. vidences needed to verify the hypotheses of the present study are collected through the various publications of the Korea Industrial Research Institutes and other agencies and institutions related to industrial research activities, and through responses to the questionnaire posted to a sample of the 66 R&D laboratories on 6 May 1987 and returned by 30 August of the same year. Some findings and conclusions made in the study are summarised as follows: (1) More information on externally developed technologies flows into the industrial firm with a R&D laboratory of its own than into the industrial firm without one, and naturally, more chances of transfer of technologies are given to the former than to the latter (see 3. 2) (2) After establishing an R&D laboratory, more technological information flows into the industrial firm than before establishing one (see 3. 3) (3) More technological information flows into the industrial firm with a well-organised R&D laboraory than into the firm with a poorly-organised one (see 3. 4) (4) More technological information flows into the ndustrial firm where the director of its R&D laboratory has status qualified to participate in the highest managerial decision making processes of the firm than into the industrial firm where the director does not have such status (see 4. 2) (5) More technological information flows into the industrial firm where the director of R&D laboratory does not hold other positions within the firm than into the industrial firm where the director holds other positions (see 4.3) (6) There is evidence showing that quantities of technological information transfered into industriali firms vary with the case that the major background of the director of the R&D laboratory is the same as the main field of R&D activities of his or her laboratery, the case that the director's background is partly related to the field of R&D activities of the laboratory, and the case that the director's major background is different from the field of R&D activities of the laboratory (see 4.4) (7) More technological information flows into the industrial firm with the director of its R&D laboratory appointed from among professional research and development workers than into the industrial firm with the director of its R&D laboratory appointed from among general managers (see 4.5) (8) More technological information flows into the industrial firm with its R&D laboratory which has established a library service unit within its own jurisdiction than into the industrial firm with its R&D laboratory which has established a library service unit within its own jurisdiction than into the industrial firm with its R&D laboratory which uses a library within the firm but outside the laboratory (see 5. 1) (9) More echnological information flows into the industrial firm with a technological information office of its own than into the industrial firm without such an office (see 5. 2) (10) More technological information flows into the industrial firm with a large research and development staff in its R&D laboratory than into the industrial firm with a small staff in its R&D laboratory (see 5. 2) (11) More technological information flows into the industrial firm with its R&D laboratory whose staff members more frequently contact experts in the conferences, seminars, symposiums, and workshops held in foreign countries and novelties in the world's major exhibitions than into the industrial firm with its R&D laboratory whose staff members less frequently contact such experts and novelties (see 6. 2 ; 6. 3)

• Journal of Arbitration Studies
• /
• v.29 no.2
• /
• pp.239-282
• /
• 2019

The importance of ADR(Alternative Dispute Resolution), which has the advantage of expertise, speed and neutrality due to the increase of arbitration cases due to domestic and foreign construction disputes, has emerged. Therefore, in order for the nation's arbitration system and the arbitration Organization to jump into the ranks of advanced international mediators, it is necessary to research the characteristics and advantages of these arbitration Organization through a study of prior domestic and foreign research and operation of international arbitration Organization. As a problem, First, education for the efficient promotion of arbitrators (compulsory education, maintenance education, specialized education, seminars, etc.). second, The effectiveness of arbitration in resolving construction disputes (hearing methods, composition of the tribunal, and speed). third, The issue of flexibility and diversity of arbitration solutions (the real problem of methodologies such as mediation and arbitration) needs to be drawn on the Arbitration laws and practical problems, such as laws, rules and guidelines. Therefore, Identify the problems presented in the preceding literature and diagnosis of the defects and problems of the KCAB by drawing features and benefits from the arbitration system operated by the international arbitration Institution. As an improvement, the results of an empirical analysis are derived for "arbitrator" simultaneously through a recognition survey. As a method of improvement, First, as an optimal combination of arbitration hearing and judgment in the settlement of construction disputes,(to improve speed). (1) A plan to improve the composition of the audit department according to the complexity, specificity, and magnification of the arbitration cases - (1)Methods to cope with the increased role of the non-lawyer(Specialist, technical expert). (2)Securing technical mediators for each specialized expert according to the large and special corporation arbitration cases. (2) Improving the method of writing by area of the arbitration guidelines, second, Introduction of the intensive hearing system for psychological efficiency and the institutional improvement plan (1) Problems of optimizing the arbitration decision hearing procedure and resolution of arbitration, and (2) Problems of the management of technical arbitrators of arbitration tribunals. (1)A plan to expand hearing work of technical arbitrator(Review on the introduction of the Assistant System as a member of the arbitration tribunals). (2)Improved use of alternative appraisers by tribunals(cost analysis and utilization of the specialized institution for calculating construction costs), Direct management of technical arbitrators : A Study on the Improvement of the Assessment Reliability of the Appraisal and the Appraisal Period. third, Improvement of expert committee system and new method, (1) Creating a non-executive technical committee : Special technology affairs, etc.(Major, supports pre-qualification of special events and coordinating work between parties). (2) Expanding the standing committee.(Added expert technicians : important, special, large affairs / pre-consultations, pre-coordination and mediation-arbitration). This has been shown to be an improvement. In addition, institutional differentiation to enhance the flexibility and diversity of arbitration. In addition, as an institutional differentiation to enhance the flexibility and diversity of arbitration, First, The options for "Med-Arb", "Arb-Med" and "Arb-Med-Arb" are selected. second, By revising the Agreement Act [Article 28, 2 (Agreement on Dispute Resolution)], which is to be amended by the National Parties, the revision of the arbitration settlement clause under the Act, to expand the method to resolve arbitration. third, 2017.6.28. Measures to strengthen the status role and activities of expert technical arbitrators under enforcement, such as the Act on Promotion of Interestments Industry and the Information of Enforcement Decree. Fourth, a measure to increase the role of expert technical Arbitrators by enacting laws on the promotion of the arbitration industry is needed. Especially, the establishment of the Act on Promotion of Intermediation Industry should be established as an international arbitration agency for the arbitration system. Therefore, it proposes a study of improvement and differentiation measures in the details and a policy, legal and institutional improvement and legislation.

• Journal for History of Mathematics
• /
• v.2 no.1
• /
• pp.91-105
• /
• 1985

Though the tradition of Korean mathematics since the ancient time up to the "Enlightenment Period" in the late 19th century had been under the influence of the Chinese mathematics, it strove to develop its own independent of Chinese. However, the fact that it couldn't succeed to form the independent Korean mathematics in spite of many chances under the reign of Kings Sejong, Youngjo, and Joungjo was mainly due to the use of Chinese characters by Koreans. Han-gul (Korean characters) invented by King Sejong had not been used widely as it was called and despised Un-mun and Koreans still used Chinese characters as the only "true letters" (Jin-suh). The correlation between characters and culture was such that , if Koreans used Han-gul as their official letters, we may have different picture of Korean mathematics. It is quite interesting to note that the mathematics in the "Enlightenment Period" changed rather smoothly into the Western mathematics at the time when Han-gul was used officially with Chinese characters. In Koryo, the mathematics existed only as a part of the Confucian refinement, not as the object of sincere study. The mathematics in Koryo inherited that of the Unified Shilla without any remarkable development of its own, and the mathematicians were the Inner Officials isolated from the outside world who maintained their positions as specialists amid the turbulence of political changes. They formed a kind of Guild, their posts becoming patrimony. The mathematics in Koryo is significant in that they paved the way for that of Chosun through a few books of mathematics such as "Sanhak-Kyemong, "Yanghwi - Sanpup" and "Sangmyung-Sanpup." King Sejong was quite phenomenal in his policy of promotion of mathematics. King himself was deeply interested in the study, createing an atmosphere in which all the high ranking officials and scholars highly valued mathematics. The sudden development of mathematic culture was mainly due to the personality and capacity of King who took any one with the mathematic talent onto government service regardless of his birth and against the strong opposition of the conservative officials. However, King's view of mathematics never resulted in the true development of mathematics per se and he used it only as an official technique in the tradition way. Korean mathematics in King Sejong's reign was based upon both the natural philosophy in China and the unique geo-political reality of Korean peninsula. The reason why the mathematic culture failed to develop continually against those social background was that the mathematicians were not allowed to play the vital role in that culture, they being only the instrument for the personality or politics of the King. While the learned scholar class sometimes played the important role for the development of the mathematic culture, they often as not became an adamant barrier to it. As the society in Chosun needed the function of mathematics acutely, the mathematicians formed the settled class called Jung-in (Middle-Man). Jung-in was a unique class in Chosun and we can't find its equivalent in China of Japan. These Jung-in mathematician officials lacked tendency to publish their study, since their society was strictly exclusive and their knowledge was very limited. Though they were relatively low class, these mathematicians played very important role in Chosun society. In "Sil-Hak (the Practical Learning) period" which began in the late 16th century, especially in the reigns of King Youngjo and Jungjo, which was called the Renaissance of Chosun, the ambitious policy for the development of science and technology called for the rapid increase of the number of such technocrats as mathematicians inevitably became quite ambitious and proud. They tried to explore deeply into mathematics per se beyond the narrow limit of knowledge required for their office. Thus, in this period the mathematics developed rapidly, undergoing very important changes. The characteristic features of the mathematics in this period were: Jung-in mathematicians' active study an publication, the mathematic studies by the renowned scholars of Sil-Hak, joint works by these two classes, their approach to the Western mathematics and their effort to develop Korean mathematics. Toward the "Enlightenment Period" in the late 19th century, the Western mathematics experienced great difficulty to take its roots in the Peninsula which had been under the strong influence of Confucian ideology and traditional Korean mathematic system. However, with King Kojong's ordinance in 1895, the traditonal Korean mathematics influenced by Chinese disappeared from the history of Korean mathematics, as the school system was changed into the Western style and the Western matehmatics was adopted as the only mathematics to be taught at the schools of various levels. Thus the "Enlightenment Period" is the period in which Korean mathematics sifted from Chinese into European.od" is the period in which Korean mathematics sifted from Chinese into European.pean.

• The Mathematical Education
• /
• v.24 no.2
• /
• pp.48-73
• /
• 1986

Though the tradition of Korean mathematics since the ancient time up to the 'Enlightenment Period' in the late 19th century had been under the influence of the Chinese mathematics, it strove to develop its own independent of Chinese. However, the fact that it couldn't succeed to form the independent Korean mathematics in spite of many chances under the reign of Kings Sejong, Youngjo, and Joungjo was mainly due to the use of Chinese characters by Koreans. Han-gul (Korean characters) invented by King Sejong had not been used widely as it was called and despised Un-mun and Koreans still used Chinese characters as the only 'true letters' (Jin-suh). The correlation between characters and culture was such that, if Koreans used Han-gul as their official letters, we may have different picture of Korean mathematics. It is quite interesting to note that the mathematics in the 'Enlightenment Period' changed rather smoothly into the Western mathematics at the time when Han-gul was used officially with Chinese characters. In Koryo, the mathematics existed only as a part of the Confucian refinement, not as the object of sincere study. The mathematics in Koryo inherited that of the Unified Shilla without any remarkable development of its own, and the mathematicians were the Inner Officials isolated from the outside world who maintained their positions as specialists amid the turbulence of political changes. They formed a kind of Guild, their posts becoming patrimony. The mathematics in Koryo significant in that they paved the way for that of Chosun through a few books of mathematics such as 'Sanhak-Kyemong', 'Yanghwi-Sanpup' and 'Sangmyung-Sanpup'. King Sejong was quite phenomenal in his policy of promotion of mathematics. King himself was deeply interested in the study, createing an atmosphere in which all the high ranking officials and scholars highly valued mathematics. The sudden development of mathematic culture was mainly due to the personality and capacity of king who took anyone with the mathematic talent into government service regardless of his birth and against the strong opposition of the conservative officials. However, King's view of mathematics never resulted in the true development of mathematics perse and he used it only as an official technique in the tradition way. Korean mathematics in King Sejong's reign was based upon both the natural philosophy in China and the unique geo-political reality of Korean peninsula. The reason why the mathematic culture failed to develop continually against those social background was that the mathematicians were not allowed to play the vital role in that culture, they being only the instrument for the personality or politics of the king. While the learned scholar class sometimes played the important role for the development of the mathematic culture, they often as not became an adamant barrier to it. As the society in Chosun needed the function of mathematics acutely, the mathematicians formed the settled class called Jung-in (Middle-Man). Jung-in was a unique class in Chosun and we can't find its equivalent in China or Japan. These Jung-in mathematician officials lacked tendency to publish their study, since their society was strictly exclusive and their knowledge was very limited. Though they were relatively low class, these mathematicians played very important role in Chosun society. In 'Sil-Hak (the Practical Learning) period' which began in the late 16th century, especially in the reigns of Kings Youngjo and Jungjo, which was called the Renaissance of Chosun, the ambitious policy for the development of science and technology called for. the rapid increase of he number of such technocrats as mathematics, astronomy and medicine. Amid these social changes, the Jung-in mathematicians inevitably became quite ambitious and proud. They tried to explore deeply into mathematics perse beyond the narrow limit of knowledge required for their office. Thus, in this period the mathematics developed rapidly, undergoing very important changes. The characteristic features of the mathematics in this period were: Jung-in mathematicians' active study an publication, the mathematic studies by the renowned scholars of Sil-Hak, joint works by these two classes, their approach to the Western mathematics and their effort to develop Korean mathematics. Toward the 'Enlightenment Period' in the late 19th century, the Western mathematics experienced great difficulty to take its roots in the Peninsula which had been under the strong influence of Confucian ideology and traditional Korean mathematic system. However, with King Kojong's ordinance in 1895, the traditional Korean mathematics influenced by Chinese disappeared from the history of Korean mathematics, as the school system was hanged into the Western style and the Western mathematics was adopted as the only mathematics to be taught at the Schools of various levels. Thus the 'Enlightenment Period' is the period in which Korean mathematics shifted from Chinese into European.

• Journal of Intelligence and Information Systems
• /
• v.27 no.1
• /
• pp.129-149
• /
• 2021

Recently, interest in social robots that can socially interact with humans is increasing. Thanks to the development of ICT technology, social robots have become easier to provide personalized services and emotional connection to individuals, and the role of social robots is drawing attention as a means to solve modern social problems and the resulting decline in the quality of individual lives. Along with the interest in social robots, the spread of social robots is also increasing significantly. Many companies are introducing robot products to the market to target various target markets, but so far there is no clear trend leading the market. Accordingly, there are more and more attempts to differentiate robots through the design of social robots. In particular, anthropomorphism has been studied importantly in social robot design, and many approaches have been attempted to anthropomorphize social robots to produce positive effects. However, there is a lack of research that systematically describes the mechanism by which anthropomorphism for social robots is formed. Most of the existing studies have focused on verifying the positive effects of the anthropomorphism of social robots on consumers. In addition, the formation of anthropomorphism of social robots may vary depending on the individual's motivation or temperament, but there are not many studies examining this. A vague understanding of anthropomorphism makes it difficult to derive design optimal points for shaping the anthropomorphism of social robots. The purpose of this study is to verify the mechanism by which the anthropomorphism of social robots is formed. This study confirmed the effect of the human-likeness of social robots(Within-subjects) and the construal level of consumers(Between-subjects) on the formation of anthropomorphism through an experimental study of 3×2 mixed design. Research hypotheses on the mechanism by which anthropomorphism is formed were presented, and the hypotheses were verified by analyzing data from a sample of 206 people. The first hypothesis in this study is that the higher the human-likeness of the robot, the higher the level of anthropomorphism for the robot. Hypothesis 1 was supported by a one-way repeated measures ANOVA and a post hoc test. The second hypothesis in this study is that depending on the construal level of consumers, the effect of human-likeness on the level of anthropomorphism will be different. First, this study predicts that the difference in the level of anthropomorphism as human-likeness increases will be greater under high construal condition than under low construal condition.Second, If the robot has no human-likeness, there will be no difference in the level of anthropomorphism according to the construal level. Thirdly,If the robot has low human-likeness, the low construal level condition will make the robot more anthropomorphic than the high construal level condition. Finally, If the robot has high human-likeness, the high construal levelcondition will make the robot more anthropomorphic than the low construal level condition. We performed two-way repeated measures ANOVA to test these hypotheses, and confirmed that the interaction effect of human-likeness and construal level was significant. Further analysis to specifically confirm interaction effect has also provided results in support of our hypotheses. The analysis shows that the human-likeness of the robot increases the level of anthropomorphism of social robots, and the effect of human-likeness on anthropomorphism varies depending on the construal level of consumers. This study has implications in that it explains the mechanism by which anthropomorphism is formed by considering the human-likeness, which is the design attribute of social robots, and the construal level of consumers, which is the way of thinking of individuals. We expect to use the findings of this study as the basis for design optimization for the formation of anthropomorphism in social robots.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.19-19
• /
• 2022

Hulled and naked oat is a perspective crop for the low input production systems due to its low requirements for soil quality and nutrition. Oats have good competitive ability against weeds and can provide appropriate yield in organic farming in comparison with other cereal species such as wheat or barley. It is a perspective crop from the point of view of use in the food industry too. The aim of our study was to compare the production and quality parameters of naked and hulled oat grown in both organic (OF) and conventional fields (CF). Small plot trials were conducted in two locations in the Czech Republic (České Budějovice, Prague) for four years (2018-2021) in two production systems (OF, and CF). We used four varieties of hulled oat (Korok, Kertag, Raven, Seldon) and one variety of naked oat (Patrik). During the vegetation, agronomically important data were recorded. After harvest samples were processed in the laboratory and analyzed selected quality parameters of grain dry matter (the protein content was determined by the Kjeldahl method, starch content in grain according to Ewers, fat content in grain dry matter by the modified method according to Soxhlet, and ash content in grain dry matter). The data were evaluated using the program STATISTICA version 13.2, StatSoft, Inc., California, USA. It is clear from the results that the number of panicles before the harvest was influenced by the location, cultivation system, year, and, to a lesser extent, the influence of the variety. The number of panicles in OF averaged 340 per square meter, which was 90% of the value of CF. For thousand grain weight (TGW), a significantly predominant effect of year was found. The independent effect of location on TGW was statistically not significant. Grain yield was predominantly influenced by cultivation system and location. In OF, it reached an average of 3.97 t.ha^-1, which was 75% of the yield of CF. As part of the evaluation of the basic grain quality indicators, the content of protein, starch, fat, and ash in the dry matter of the grain was evaluated. The content of protein in the dry matter of the grain was predominantly influenced by year, followed by the influence of the variety and a fairly comparable influence of the cultivation system and locality. On average, it achieved 16.05% in OF and 17.01% in CF. The starch content was then related to the protein content, where as a result of the lower protein content in the grain of OF oats, the content of starch and fat was on the contrary increased. The year turned out to be the most significant factor, affecting both the starch content in the dry matter of the grain and the fat content. This was followed again by a fairly comparable influence on the cultivation system and locality. The influence of the cultivation system and location was not statistically significantly applied in the case of ash content in dry matter. Based on our results we can propose both types of oat (hulled and naked) as perspective crops for OF. An organic farmer can expect to achieve stable yields which, in less favorable conditions for the production of cereals in the OF, may be close to the level of conventional yields. In the future, it will be important to change agrotechnology in OF and increase oat yield because this crop has a good potential to grow in areas with low nitrogen input or less fertile soil.