• 한국수처리학회지
• /
• 제26권6호
• /
• pp.13-26
• /
• 2018

This research was conducted to elucidate the removal mechanism of heavy metals and sulfate ion from acid mine drainage(AMD) by porous zeolite-slag ceramics (ZS ceramics) packed in a column reactor system. The average removal efficiencies of heavy metals and sulfate ion from AMD by the 1:3(Z:S) porous ZS ceramics in the column reactor under the HRT condition of 24 hours were Al 97.5%, As 98.8%, Cd 86.1%, Cu 96.2%, Fe 99.7%, Mn 64.1%, Pb 97.2%, Zn 66.7%, and $SO_4{^{2-}}$ 76.0% during 121 days of operation time. The XRD analysis showed that the ferric iron from AMD could be removed by adsorption and/or ion-exchange on the porous ZS ceramics. In addition it was known that Al, As, Cu, Mn, and Zn could adsorb or coprecipitate on the surface of Fe precipitates such as schwertmannite, ferrihydrite, or goethite. The EDS analysis revealed that Al, Fe, and Mn, which were of relatively high concentration in the AMD, would be adsorbed and/or ion-exchanged on the porous ZS ceramics and also exhibited that Al, Cu, Fe, Mn, and Zn could be precipitated as the form of metal hydroxide or sulfate and adsorbed or coprecipitated on the surface of Fe precipitates. The microscopic results on the porous ZS ceramics and precipitated sludge in a column reactor system suggested that the heavy metals and sulfate ion from AMD would be eliminated by the multiple mechanisms of coprecipitation, adsorption, ion-exchange as well as precipitation.

• 대한환경공학회지
• /
• 제29권3호
• /
• pp.357-364
• /
• 2007

본 연구는 폐타이어의 재활용 일환으로 기존의 분말 화된 폐타이어 표면에 특정의 Functional group을 형성시켜 수중의 중금속이온들 과의 Chelate complexes 형성을 유도 함으로서 중금속 제거제로서의 폐타이어 활용방안을 제시 하고자 하였다. 이를 위해 FT-IR을 통하여 Function리 group의 종류 및 XRD, XRF, SEM 용출실험을 통해 개질 변화된 폐타이어 특성 분석하였으며 Kinetics Study를 통해 흡착모델에 적용하여 특정상수 값을 도출 하였다. 결과적으로 중금속 흡착 선호도는 $Pb^{2+}>Cu^{2+}>Cd^{2+}$순으로 확인되었으며, 초기 30분 이내에 흡착평형에 도달 하였고, 흡착반응속도 또한 0.27에서 $1.78\sim3.15(g/mg{\cdot}min)$로 증가하였으며, 80% 이상의 제거효율을 보였다. 이는 기존의 분말폐타이어에 비해 그 효율이 10배가량 증가함을 알 수 있었으며, Functional group을 활용한 폐타이어를 이용할 경우 중금속제거제로서의 뛰어난 효율성을 제시 할 수 있었다.

• 고문화
• /
• 66호
• /
• pp.87-112
• /
• 2005

Stain removal on ivory has been, for a long time, considered an undesirable treatment in conservation field because ivory is hygroscopic and anisotropic, having different physical properties in different directions. Cyclododecane, which sublimes at room temperature, has been investigated for its use in conservation field since 1995, as a reversible temporary consolidant, sealing agent or coating, water repellent, and barrier layer. This research aims to remove stains on ivory, temporarily protecting the none-stained area or painted area from methanol, acetone or the aqueous cleaning system using cyclododecane as a hydrophobic sealing agent. This research also aims to obtain information regarding whether cyclododecane can be safely and effectively used on archaeological wet ivory. Melted cyclododecane and saturated solutions of cyclododecane in mineral spirits, and hexanes were applied to ivory samples. Application methods, working properties of cyclododecane on ivory, and effect of cyclododecane coating on moisture content of wet ivory were evaluated. The sealing layer formed by molten cyclododecane or by saturated cyclododecane solution in hexane or saturated cyclododecane solution in mineral spirits did not form a secure contact with the surface of the highly polished ivory. The sealing formed with two different layers, in which saturated cyclododecane solution in hexane was applied initially and then molten cyclododecane was applied over the first layer, was found to securely protect the painted area. When the wet samples were kept in 100% RH environments for a month, active mold growths were observed except in the samples sealed with molten cyclododecane. In conclusion, cyclododecane was an efficient hydrophobic sealing agent to protect painting area while cleaning stains on ivory. It also prevented mold growing on wet ivory and wet bone. Evenness of cyclododecane film on ivory will be determined in UV light. Analytical techniques will include visual observation, polarized light microscopy, Scanning Electron Microscope, and Gas Chromatography.

• 멤브레인
• /
• 제30권1호
• /
• pp.9-20
• /
• 2020

바이오 의약품 생산과정의 대부분 공정에서 분리막이 사용되고 있다. 분리막 공정은 다른 공정의 전처리, 공정 자체의 불순물 분리, 바이러스 제거, 목표 생성물 농도 조절 및 완충 용액 교환 등에 사용된다. 인체에 사용하는 바이오 의약품의 바이러스 오염은 심각한 임상 결과와 직결되는 민감한 문제이기 때문에 바이러스 필터는 제품의 효능과 안정성을 보장하기 위해 중요한 역할을 한다. 바이러스 필터는 일반적으로 표면 개질된 PVDF, PES, CRC 등 다양한 고분자로 만들어진 복합다층 구조를 가지고 있다. 제조업체에 따라 대칭(symmetric) 또는 비대칭(asymmetric) 등 다른 기공 구조와 형태를 가지고 있으며, 주름막, 평판 시트 또는 중공사 형태로 사용된다. 바이러스 필터는 Asahi Kasei 를 비롯해 Millipore, Pall, Sartorius 등 몇몇 해외 업체들이 독점적으로 국내에 공급하고 있다. 바이러스 필터를 대체하려면 검증작업을 통해 규제기관의 승인을 받는 등 상당한 시간과 비용이 소요된다. 최근 일본의 수출규제로 국산화가 중요해진 만큼 제거 성능 고도화 등 선제적으로 기술자립도를 높여가야 한다.

• Journal of Chest Surgery
• /
• 제34권8호
• /
• pp.611-614
• /
• 2001

배경: 하지정맥류의 새로운 수술법중의 하나인 투시조명하 정맥류수술법의 효과 및 안정성 등을 알아보고자 하였다. 대상 및 방법: 순천향대학교부석 부천병원 흉부외과에서 수술을 시행 받은 83명의 환자를 대상으로 하였다. 병력 및 수술시간, 절개창 및 술 후 통증 정도, 합병증 등을 살펴보았다. 결과: 환자들의 연령은 평균 45.5세(범위, 25세-78세)였으며, 남자가 32명 여자가 51명으로 여자가 많았다. 103예의 수술을 시행하였으며 한쪽인 경우가 63예, 양측인 경우가 20예였다. 평균수술시간은 한쪽 하지당 35.5분이었고 수술창은 한쪽 하지당 서혜부수술창을 제외하고 평균 2.7개이었다. 술 후 합병증으로는 혈종생성이 3예, 부종이 2예, 남겨진 정맥류가 2예였다. 술 후 통증 점수(통증이 없으면 1점, 아주 심각한 통증이 있으면 10점)는 수술당일은 평균 2.4점이었고 수술 후 3일째는 2점, 1개월 이후는 1점이었다. 결론: 투시조명하 정맥류 수술법은 안전하고 효과적이며 미용효과가 우수한 새로운 치료법의 하나라고 생각된다.

• 한국정보통신학회논문지
• /
• 제7권7호
• /
• pp.1575-1581
• /
• 2003

사회가 고도의 디지털 정보화 시대로 급속히 발전함에 따라 영상 및 음성 데이터의 획득, 전송, 저장을 위한 멀티 미디어 통신 서비스가 상용화 되어가고 있다. 그러나, 여전히 데이터를 디지털화하거나 전송하는 과정에서 여러 가지 원인에 의해 노이즈가 발생하고 있으며, 이러한 노이즈를 제거하기 위한 연구는 지금까지 계속되고 있다. 노이즈를 제거하기 위해 기존에 FFT와 STFT 등이 있었으나, 신호에 대한 시간정보를 알 수 없고 시간-주파수 국부성이 상충관계를 갖는다. 따라서, 이러한 한계를 극복하기 위해 신호처리 분야의 새로운 기법으로 제시된 웨이브렛 변환은 시간-주파수 국부성을 가지므로, 다양한 신호를 해석하는데 용이할 뿐만 아니라, 다중 해상도 해석이 가능하므로 최근 여러 분야에 응용되고 있다. 그리고, 두 개의 웨이브렛 기저가 힐버트 변환쌍을 형성하도록 설계될 때, 웨이브렛 쌍은 데이터 특징 검출에서 기존의 DWT보다 우수한 성능을 갖는다. 따라서, 본 연구에서는 절단된 계수 벡터에 의해 설계된 두 개의 dyadic 웨이브렛 기저와 적응-길이 메디안 필터를 사용하여 임펄스 노이즈를 제거하였다.

• 천문학회보
• /
• 제39권2호
• /
• pp.103-103
• /
• 2014

Manufacturing of lens and mirror using Diamond Turning Machine (DTM) offers distinct advantages including short fabrication time and low cost as compared to grinding or polishing process. However, the DTM process can leave mid-frequency error in the optical surface which generates an undesirable diffraction effect and stray light. The mid-frequency error is expected to be eliminated by mechanical polishing after the DTM process, but polishing of soft surface of ductile aluminum is extremely difficult because the polishing process inevitably degrades the surface form accuracy. In order to increase its surface hardness, we performed electroless nickel plating on the surface of diamond-turned aluminum (Al-6061T6) off-axis mirrors, which was followed by the 6-hour-long baking process at $200^{\circ}C$ for improving its hardness. Then we polished the nickel plated off-axis mirrors to remove the mid-frequency error and measured polished mirror surfaces using the optical surface profilometer (NT 2000, Wyko Inc.). Finally, we ascertained that the mid-frequency error on the mirror surface was successfully removed. During the whole processes of nickel plating and polishing, we monitored the form accuracy using the ultra-high accurate 3-D profilometer (UA3P, Panasonic Corp.) to maintain it within the allowable tolerance range (< tens of nm). The polished off-axis mirror was optically tested using a visible laser source and a pinhole, and the airy pattern obtained from the polished mirror was compared with the unpolished case to check the influence of mid-frequency error on optical images.

• Membrane and Water Treatment
• /
• 제6권3호
• /
• pp.173-187
• /
• 2015

The goal of present work is the preparation of a novel positively charged nanofiltration (NF) membrane and its development for the cation removal of aqueous solutions. This NF membrane was fabricated by the surface modification of polysulfone (PSf) ultrafiltration support. The active top-layer was formed by interfacial cross-linking polymerization of poly(ethyleneimine) (PEI) with p-xylylene dichloride (XDC) and then quaternized with methyl iodide to form a perpetually positively charged layer. In order to improve the efficiency of nanofiltration membrane, the concentration of PEI, XDC and methyl iodide solutions, PEI coating and cross-linking time have been optimized. As a result, a high water flux and high $CaCl_2$ rejection (1,000 ppm) was obtained for the composite membrane with values of $18.29L/m^2.h$ and 93.62% at 4 bar and $25^{\circ}C$, respectively. The rejections of NF membrane for different salt solutions followed the order of $Na_2SO_4$ < $MgSO_4$ < NaCl < $CaCl_2$. Molecular weight of cut off (MWCO) was calculated via retaining of PEG solutions with different molecular weights that finally, it revealed the Stokes and hydrodynamic radius of 1.457 and 2.507 nm on the membrane selective layer, respectively. The most efficient positively charged nanofiltration membrane exhibited a $Ni^{2+}$ rejection of 96.26% for industrial wastewater from Shamse Hadaf Co. (Kashan, Iran).

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2009년도 추계 학술논문 발표대회
• /
• pp.157-160
• /
• 2009

The decision of the Form removal time which leads the early assuring strength of the concrete from Apartment construction is the fact which is important from Reducing the period of works and the economical efficiency side. Especially, with Complex building of recent times the same Tall building and Multiple Apartment Site which only follows in upgrade of interior construction of apartment site and shortening the frame construction period becomes very, importantly is the actual condition where the effort which is various for this is attempted. But is caused by with limit and economical efficiency problem of case concrete early strength revelation of most and is not put to practical use is the actual condition. Develops concrete mixture which is a utility from the research which sees hereupon and the effect which is economic leads construction duration shortening under maximizing boil.

• 한국물환경학회지
• /
• 제33권4호
• /
• pp.441-448
• /
• 2017

Microcystis aeruginosa (M. aeruginosa) is a cyanobacterium species that can form harmful algal blooms in freshwater bodies worldwide. The use of Artemisia asiatica extracts to control M. aeruginosa inhibition will be environmentally friendly and promising. Artemisia asiatica extracts removed successfully upto 88% of M. aeruginosa pH 8 at $25^{\circ}C$ of temperature. These results was indicated that the amount of 2.24 g/L Artemisia asiatica extracts was removed 1g dryweight/L of M. aeruginosa. The kinetic data showed substrate inhibition kinetics and maximum growth rate was obtained when the M. aeruginosa was grown in medium containing 2.5 g/L of initial concentration of Artemisia asiatica extracts. In the various growth control models, Luong model showed the highest correlation coefficient of 0.9916. Therefore, the Luong model was the most suitable control model for the growth control of M. aruginosa using Artemisia asiatica extracts. In conclusion, the growth control of M. aruginosa using Artemisia asiatica extracts can be applied in the field without controlling the temperature and pH of rivers and streams, and it is possible to control the growth of M. aruginosa efficiently in a short time. The natural extract, Artemisia asiatica extracts, can be a promising inhibition due to its high efficiency and low dose requirements.